Search

Many different types of magnetic particles have been developed for the purpose of hyperthermia cancer therapy. In this study, a magnetic nanoparticle based on dicalcium phosphate dihydrate (DCPD) was formed by co-precipitation method. Addition of different concentrations of ferrous chloride to DCPD can alter its material properties. Various physical, chemical and magnetic tests of the magnetic DCPD nanoparticles (mDCPD) were performed, including X-ray diffraction (XRD), inductively coupled plasma-optical emission spectrometer (ICP-OES), superconducting quantum interference device (SQUID), and transmission electron microscopy (TEM). The heating efficiency of mDCPD in alternating magnetic field was proved to be suitable for hyperthermia. The results of cytotoxicity tests (WST-1 and LDH assay) showed no harmful effect. The mDCPD showed relative cancer-killing ability without damaging normal cells in vitro.

Calcium phosphate cements were first proposed as synthetic bone substitutes over two decades ago, however, they are characterised by slow chemical or cellular resorption and a slow osteointegration. In contrast, bone autograft has been shown to stimulate osteoclastogenesis and angiogenesis resulting in active bone remodelling and rapid graft incorporation. Therefore, we aimed to develop a biomaterial able to release a key stimulator of the bone remodelling process, cytokine RANKL. Cylinders of brushite cement, hydroxyapatite cement and sodium alginate were loaded with RANKL either by incorporation into the cement or by coating the material with soluble RANKL. To test the biological activity of these formulations, we assessed their effectiveness in inducing osteoclast formation from RAW 264.7 monocytic cell line. Only brushite and hydroxyapatite cements coated with RANKL allowed for retaining sufficient biological activity to induce osteoclast formation. Most efficient was coating 40 mg cylinder of brushite cement with 800 ng RANKL. We have found that RANKL-coated brushite cement exhibits osteoclastogenic activity for at least 1 month at 37 °C. Thus, we developed a formulation of brushite cement with RANKL – a synthetic bone graft that is similar to autografts in its ability to actively induce osteoclastogenesis.

Long-term stability during storage (shelf-life) is one major criterion for the use of a material as medical device. This study aimed to investigate the ageing process of beta-tricalcium phosphate/monocalcium phosphate cement powders when stored in sealed containers at ambient conditions. This kind of cement type is of interest because it is forming dicalcium phosphate dihydrate (brushite) when set, which is in contrast to hydroxyapatite resorbable in physiological conditions. The stability of cements was checked by either measuring the phase composition of powders as well as the setting time and compressive strength when mixed with sodium citrate as liquid. Critical factors influencing ageing were found to be temperature, humidity and the mixing regime of the powders. Mechanically mixed cement powders which were stored in normal laboratory atmosphere (22 degrees C, 60% rel. humidity) converted to dicalcium phosphate anhydrous (monetite) within a few days; this could be mechanistically related to a dissolution/precipitation process since humidity condensed on the particles' surfaces and acted as reaction medium. Various storage conditions were found to be effective in prolonging cement stability which were in order of effectiveness: adding solid citric acid retardant>dry argon atmosphere=gentle mixing (minimal mechanical energy input) low temperature.

Two dicalcium phosphate dihydrate (DCPD) hydraulic cements and one apatite hydraulic cement were implanted in epiphyseal and metaphyseal, cylindrical bone defects of sheep. The in vivo study was performed to assess the biocompatibility of the DCPD cements, using the apatite cement as control. After time periods of 2, 4 and 6 months the cement samples were clinically and histologically evaluated. Histomorphometrically the amount of new bone formation, fibrous tissue and the area of remaining cement were measured over time. In all specimens, no signs of inflammation were detectable either macroscopically or microscopically. All cements were replaced by different amounts of new bone. The two DCPD-cements showed the highest new bone formation and least cement remnants at 6 months, whereas the apatite was almost unchanged over all time periods.

Different biomaterials have been used as scaffolds for bone tissue engineering. Here we characterize a biomaterial composed of sintered (1100 degrees C) and powdered hydroxyapatite (HA) and type I collagen (Coll), both of bovine origin, designed for osteoconductive and osteoinductive scaffolds. Coll/HA proportions were 1/2.6 and 1/1 (wet weight), and particles sizes varied from 200 to 400 microm. Vv (volume density) and Sv (surface to volume density) for the HA particles in the composite ranged from 0.48 +/- 0.06 to 0.55 +/- 0.02 and 5.090 +/- 0.545 to 6.366 +/- 0.289 microm(-1), respectively. Due to the relatively small changes in Vv and Sv, a macroporosity could be characterized for the biocomposite. X-ray diffraction and infrared spectroscopy showed that the sintered bone was composed essentially of HA with minimum additional groups such as surface calcium hydroxide, surface and crystal water, free carbon dioxide and possibly brushite. Mass spectrometry detected carbonates at A and B sites of HA, and weakly bound to the structure. Human osteoblasts adhered and spread on both the HA particle surface and the collagen fibers, which seemed to guide cells between adjacent particles. The biocomposite studied has several characteristics considered as ideal for its use as a scaffold for osteoconduction and osteoinduction.

A hydraulic calcium phosphate cement having dicalcium phosphate dihydrate (DCPD) as end-product of the setting reaction was implanted in a cylindrical defect in the diaphysis of sheep for up to 6 months. The composition of the cement was investigated as a function of time. After setting, the cement composition consisted essentially of a mixture of DCPD and beta-tricalcium phosphate (beta-TCP). In the first few weeks of implantation, the edges of the cement samples became depleted in DCPD, suggesting a selective dissolution of DCPD, possibly due to low pH conditions. The cement resorption at this stage was high. After 8 weeks, the resorption rate slowed down. Simultaneously, a change of the color and density of the cement center was observed. These changes were due to the conversion of DCPD into a poorly crystalline apatite. Precipitation started after 6-8 weeks and progressed rapidly. At 9 weeks, the colored central zone reached its maximal size. The fraction of beta-TCP in the cement was constant at all time. Therefore, this study demonstrates that the resorption rate of DCPD cement is more pronounced as long as DCPD is not transformed in vivo.

Strontium-substituted beta-TCP with the general formula Ca((3-x))Sr(x)(PO(4))(2) (0

Depending upon local conditions, brushite (CaHPO4 � 2H2O) cements may be largely resorbed or (following hydrolysis to hydroxyapatite) remain stable in vivo. To determine which factors influence cement resorption, previous studies have investigated the solution-driven degradation of brushite cements in vitro in the absence of any cells. However, the mechanism of cell-mediated biodegradation of the brushite cement is still unknown. The aim of the current study was to observe the cell-mediated biodegradation of brushite cement formulations in vitro. The cements were aged in the presence of a murine cell line (RAW264.7), which had the potential to form osteoclasts in the presence of the receptor for nuclear factor kappa B ligand (RANKL) in vitro, independently of macrophage colony stimulating factor (M-CSF). The cytotoxicity of the cements on RAW264.7 cells and the calcium and phosphate released from materials to the culture media were analysed. Scanning electron microscopy (SEM) and focused ion beam (FIB) microscopy were used to characterise the ultrastructure of the cells. The results showed that the RAW264.7 cell line formed multinucleated TRAP positive osteoclast-like cells, capable of ruffled border formation and lacunar resorption on the brushite calcium phosphate cement in vitro. In the osteoclast-like cell cultures, ultrastuctural analysis by SEM revealed phenotypic characteristics of osteoclasts including formation of a sealing zone and ruffled border. Penetration of the surface of the cement, was demonstrated using FIB, and this showed the potential demineralising effect of the cells on the cements. This study has set up a useful model to investigate the cell-mediated cement degradation in vitro. r 2006 Elsevier Ltd. All rights reserved.

A new calcium phosphate cement is reported, which sets to form a matrix consisting of brushite, dicalcium pyrophosphate dihydrate and an amorphous phase following the mixture of β-tricalcium phosphate with an aqueous pyrophosphoric acid solution. This reactant combination set within a clinically relevant time-frame (approximately 10 min) and exhibited a higher compressive strength (25 MPa) than previously reported brushite cements. The in vitro degradation of the β-tricalcium phosphate–pyrophosphoric acid cement was tested in both phosphate buffered saline and bovine serum. The pyrophosphate ion containing cement reported here was found not to be hydrolysed to form hydroxyapatite in vitro like β-tricalcium phosphate–orthophosphoric acid solution cements. This finding is significant since the formation of hydroxyapatite by hydrolysis is thought to retard in vivo degradation of brushite cements. When aged in bovine serum, the cement lost considerably more mass than when aged in phosphate buffered saline, indicating that proteins, most likely phosphatase enzymes played an important role in the degradation. As pyrophosphate ions are thought to be the source of orthophosphate ions during bone mineralisation, this new class of bone cement offers a route to new degradable synthetic bone grafting materials.

A broadening of the indications for which calcium phosphate cements (CPC) can be used, for example, in the field of vertebroplasty, would require injectable and higher strength materials. Unmodified CPC are not injectable due to a filter-pressing effect during injection. In this work we demonstrated that an effective method for improving the injection properties of CPC was by the use of sodium citrate solution as a liquid component. Cement consisting of tetracalcium phosphate (TTCP) and monetite (DCPA) mixed with water up to a powder:liquid ratio (P:L) of 3.3 g/ml had an injectability of approximately 60%. The use of 500 mM trisodium citrate solution instead of water decreased the viscosity of the cement paste to a point, where complete injectability (>95%) through an 800 microm diameter hypodermic needle could be achieved at low loads. The reduction in water demand of the cement effected by the use of sodium citrate enabled high P:L mixes to be formed which were 400% stronger than cements made with water. The effect was less pronounced with compacted cements such that at 9 MPa applied pressure, 58% improvement was obtained and at 50 MPa 36% improvement was measured yielding a cement with a compressive strength of 154 MPa. The liquefying effect of sodium citrate was thought to derive from a strong increase in the surface charge of both the reactants and the product as determined by zeta-potential measurement.

A bovine serum albumin protein-containing calcium phosphate coating (BSA/brushite) was prepared by electrochemically assisted co-precipitation onto a hydroxyapatite (HA) coated Ti-6Al-4V surface. Electrochemically assisted co-precipitation of BSA/brushite coatings onto HA resulted in a 70-fold increase in BSA inclusion compared to simple adsorption, and was subsequently released by a slower mechanism (15% loss over 70 h). Thus, this electrochemically assisted co-precipitation technique provides an efficient method of protein incorporation at physiological temperature, with a potential for sustained release of therapeutic agents as may be required for metallic implant fixation.

In vivo studies investigating the use of brushite cements have demonstrated mixed results with one or more of dissolution, hydrolysis, fragmentation and long term stability being demonstrated. It has been suggested that sample volume, implant location, and species can affect in vivo behaviour. As few in vitro studies on this cement system have been performed, this study aimed to compare the effects of static and dynamic in vitro ageing protocols on the phase composition, weight loss and mechanical properties of brushite cement. The effects of immersion liquid to cement volume ratio (LCVR) and sample volume on phase composition were investigated and comparative in vitro experiments were also performed in foetal bovine serum. It was determined that the weight loss after 28 days was up to seven times higher in serum than in phosphate buffered saline (PBS) and that fragmentation accounted for most of the weight loss observed. Hydroxyapatite was formed in PBS but not in serum when aged in refreshed media at all LCVRs investigated. This study has highlighted that LCVR, media refresh rate and media composition are critical to brushite cement performance. It appears that brushite cement removal from an implant site may be complex and dependent on physiological processes other than simple dissolution. A better understanding of these processes could provide the means to engineer more precise calcium phosphate cement degradation profiles.

Chemical modification of biological materials used in the manufacture of cardiac valves tends to reduce the relatively high degree of biodegradation and calcification of the implanted bioprostheses. The most widely used treatment to reduce biodegradability of the valves is glutaraldehyde fixation. However, this treatment is potentially toxic and induces tissue calcification. In order to minimize these undesirable effects, we have analyzed the effect of a pre-fixation of endogenous proteoglycans and exogenous glycosaminoglycans, as well as the borohydride reduction influence on the different modified ostrich pericardium implants after subcutaneous implantation in rats. The presence of calcific deposits was detected in all implanted GA-fixed samples; however, calcification was highly reduced in both groups of periodate-prefixed materials, which showed also a very low Ca/P molar ratio. Borohydride post-treatment of these biomaterials resulted in a significant increase in calcium phosphate precipitation, with the appearance of calcium deposits mainly in an amorphous form even though X-ray diffraction allowed the detection of brushite- and apatite-like crystals. Regarding tissue stability, no significant differences were found among the borohydride-untreated implants but higher levels of matrix metalloproteinases were observed by gelatin zymography in the periodate pre-fixed materials. This increase was partially reduced by pre-fixation of exogenous chondroitin 4-sulfate. On the other hand, borohydride post-treatment not only increased calcification, but also reduced tissue stability and increased the presence of matrix-degrading activities.

Previous study has demonstrated that brushite (CaHPO4 � 2H2O), modified by partial potassium substitution for calcium, can transform quickly into hydroxyapatite (HA, Ca5(PO4)3OH) when exposed to aqueous salt solutions at room temperature. Analyses techniques used in those studies required sample retrieval from solution, which may alter the sample surface. In this work FTIR/ ATR was used in analysis, enabling in situ study of the transformation within the aqueous environment. To test the biocompatibility of this brushite, cellular response to the transformation needs to be understood. Cellular response was initiated by bovine serum albumin adsorption on the brushite surface. The response was studied by monitoring the conformation of the adsorbed protein, which is critical to cellular reaction. This required monitoring the brushite transformation and surface adsorbed protein conformation simultaneously which can be realized using FTIR/ATR. Based on band fitting and second derivative results from the spectra it was found that the conformation of the adsorbed BSA changes during the brushite transformation to HA. This study also demonstrated that the deposition of the brushite could be monitored in real time which offers the possibility for studying surface bonding during electrodeposition. r 2002 Elsevier Science Ltd. All rights reserved.

Compression, tension and torsion tests were designed and completed successfully on a brushite and a precipitated hydroxyapatite cement in moist condition. Elastic and strength properties were measured for these three loading cases. For each cement, the full set of strength data was fitted to an isotropic Tsai-Wu criterion and the associated coefficients identified. Since the compressive Young's moduli were about 10% larger than the tensile moduli, the full set of elastic data of each cement was fitted to a conewise linear elastic model. Hysteresis of the stress-strain curves was also observed, indicating dissipation mechanisms within these cement microstructures. A comparison of the measured mechanical properties with human cancellous bone confirmed the indication of brushite as a bone filling material and the potential of the hydroxyapatite cement as a structural biomaterial.

Calcium phosphate cements (CPC) are increasingly used in the orthopedic field. This kind of cement has potential applications in bone defect replacements, osteosynthetic screw reinforcements or drug delivery. In vivo studies have demonstrated a good osteointegration of CPC. However, it was also observed that the resorption of CPC could create particles. It is known from orthopedic implant studies that particles can be responsible for the peri-implant osteolysis. Biocompatibility assessment of CPC should then be performed with particles. In this study, we quantified the functions of osteoblasts in the presence of beta-TCP, brushite and cement particles. Two particle sizes were prepared. The first one corresponded to the critical diameter range 1-10 microm and the second one had a diameter larger than 10 microm. We found that CPC particles could adversely affect the osteoblast functions. A decrease in viability, proliferation and production of extracellular matrix was measured. A dose effect was also observed. A ratio of 50 CPC particles per osteoblast could be considered as the maximum number of particles supported by an osteoblast. The smaller particles had stronger negative effects on osteoblast functions than the larger ones. Future CPC development should minimize the generation of particles smaller than 10 microm.