Search

Tissue-engineered organs and implants hold promise for the replacement of damaged and diseased organs. However, the foreign body response (FBR) is a major obstacle that compromises the function of tissue-engineered constructs, typically causing them to fail. Two components of FBR are an inflammatory response and a lack of vascularization. To overcome these limitations, a collagen system was developed to release interleukin-6 (IL-6) siRNA and endothelial nitric oxide synthase (eNOS) pDNA in a staggered manner. Hollow collagen microspheres were assembled into a collagen sphere-in-hydrogel system that displayed a staggered release profile in vitro. This system was assessed in vivo in a subcutaneous rat model. The doses of IL-6 siRNA and eNOS pDNA were first individually optimized for their ability to reduce the volume fraction of inflammatory cells (7 days) and increase the length density of blood vessels (14 days), respectively. The identified optimal doses were combined, and the ability of the system to decrease the volume fraction of inflammatory cells and increase the length density of blood vessels was confirmed at both 7 and 14 days. Analysis of the tissue using Raman microspectroscopy revealed that in addition to changes in inflammation and angiogenesis, there were also changes in the extracellular matrix (ECM) at seven days. While changes in sulfated glycosaminoglycan (sGAG) content of the ECM were not detected, changes in the binding of sGAG of the ECM to growth factors were observed. Two growth factors tested, VEGF165 and bFGF showed increased binding to sGAG extracted from eNOS pDNA-treated samples at seven days, increasing the angiogenic potential of the ECM. Thus, we observe that changes in the tissue in terms of the balance of inflammation and angiogenesis as well changes in the activity of sGAG of the ECM occurs following dual delivery of nucleic acids from the collagen sphere-in-hydrogel system., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Chemokine-induced stem cell recruitment is a promising strategy for post myocardial infarction treatment. Injection of stromal cell-derived factor 1 (SDF1) has been shown to attract bone marrow-derived progenitor cells (BMPCs) from the blood that have the potential to differentiate into cardiovascular cells, which support angiogenesis, enabling the improvement of myocardial function. SDF1-GPVI bi-specific protein contains a glycoprotein VI (GPVI)-domain that serves as an anchor for collagen type I (Col I) and III, which are exposed in the wall of injured vasculature. In this study, we generated a cytocompatible hydrogel via photo-crosslinking of poly(ethylene glycol) diacrylate that serves as a reservoir for SDF1-GPVI. Controlled and sustained release of SDF1-GPVI was demonstrated over a period of 7 days. Release features were modifiable depending on the degree of the crosslinking density. Functionality of the GPVI-domain was investigated using a GPVI-binding ELISA to Col I. Activity of the SDF1-domain was tested for its CXCR4 binding potential. Preserved functionality of SDF1-GPVI bi-specific protein after photo-crosslinking and controllable release was successfully demonstrated in vitro supporting the implementation of this drug delivery system as a powerful tool for therapeutic protein delivery in the treatment of cardiovascular ischemic disease., (Copyright © 2014 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Currently available heart valve replacements are limited in long-term performance or fail due to leaflet thickening, lack of growth or remodeling potential. In order to address these issues, it is necessary to mimic multiple factors of the native valvular extracellular matrix (ECM) such as architecture, mechanical behavior and biochemical signals. Here, we successfully generated an electrospun PEGdma-PLA scaffold adapted to the structure and mechanical properties of native valve leaflets. Valvular interstitial cells (VICs) and valvular endothelial cells (VECs) were seeded on the scaffold and when cultured under physiological conditions in a bioreactor, the construct performed like a native leaflet. Atomic force microscopy (AFM) was employed to obtain detailed mechanical information from the leaflets, which enabled the first layer-specific measurement of the Young's modulus. Interestingly, spongiosa stiffness was much lower compared to the fibrosa and ventricularis. Moreover, investigations into human fetal heart valve development identified collagen type I and versican as important structural proteins. As a proof of principle, these proteins were introduced to the scaffold, demonstrating the ability to bio-functionalize the hybrid valve based on natures' blueprint., (Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Tissue-engineered skin equivalents based on primary isolated fibroblasts and keratinocytes have been shown to be useful tools for functional in vitro tests, including toxicological screenings and drug development. In this study, a commercially available squamous cell carcinoma (SCC) cell line SCC-25 was introduced into epidermal and full-thickness skin equivalents to generate human-based disease-in-a-dish model systems. Interestingly, when cultured either in the epidermis or dermis of full-thickness skin equivalents, SCC-25 cells formed hyper-keratinized tumor cell nests, a phenomenon that is frequently seen in the skin of patients afflicted with SCC. Raman spectroscopy was employed for the label-free cell phenotype characterization within the engineered skin equivalents and revealed the presence of differential protein patterns in keratinocytes and SCC-25 cells. To conclude, the here presented SSC disease-in-a-dish approaches offer the unique opportunity to model SSC in human skin in vitro, which will allow further insight into SSC disease progression, and the development of therapeutic strategies., (Copyright © 2013 The Authors. Published by Elsevier Ltd.. All rights reserved.)

Decorin is a structural and functional proteoglycan (PG) residing in the complex network of extracellular matrix (ECM) proteins in many connective tissues. Depending on the protein core and the glycosaminoglycan chain, PGs support cell adhesion, migration, proliferation, differentiation, ECM assembly and growth factor binding. For applications in tissue engineering, it is crucial to develop reliable, ECM-mimicking biomaterials. Electrospinning is a suitable method for creating three-dimensional (3D), fibrillar scaffolds. While there are numerous reports on the electrospinning of proteins including collagen, to date, there are no reports on the electrospinning of PGs. In the following study, we used electrospinning to generate decorin-containing matrices for tracheal tissue engineering applications. The electrospun scaffolds were analyzed using scanning electron microscopy, atomic force microscopy, contact angle measurements and dynamic mechanical analysis. Additionally, we confirmed PG functionality with immunostaining and 1,9-dimethylmethylene blue. To determine cell-matrix-interactions, tracheal cells (hPAECs) were seeded and analyzed using an FOXJ1-antibody. Moreover, interactions of the electrospun scaffolds with immune-mediated mechanisms were analyzed in detail. To conclude, we demonstrated the feasibility of electrospinning of decorin to generate functional 3D scaffolds with low immunogenicity for hPAEC expansion. Our data suggest that these hybrid materials may be suitable as a substrate for tracheal tissue engineering., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Our focus was to develop a three-dimensional (3D) human dynamic in vitro tissue model that mimics the natural microenvironment of the small intestine. We co-cultured human Caco-2 cells with primary-isolated human microvascular endothelial cells (hMECs) on decellularized porcine jejunal segments within a custom-made dynamic bioreactor system that resembles the apical and basolateral side of the intestine for up to 14 days. The obtained data were compared to results generated using routine static Caco-2 assays. We performed histology and immunohistochemistry. Permeability was measured using directed transport studies. Histological analyses revealed that in tissue-engineered segments, which had been cultured under dynamic conditions, the Caco-2 cells showed a high-prismatic morphology, resembling normal primary enterocytes within their native environment. We further identified that the transport of low permeable substances, such as fluorescein and desmopressin increased within the dynamic bioreactor cultures. Immunohistochemical staining showed a significantly higher expression of the efflux transport p-glycoprotein (p-gp) under dynamic culture conditions when compared to the static cultures. We conclude that the integration of physiological parameters is crucial for the establishment of a reliable 3D intestinal in vitro model, which enables the simulation of drug transport over the gut-blood-barrier in a simplified way., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Stem or progenitor cell populations are often established in unique niche microenvironments that regulate cell fate decisions. Although niches have been shown to be critical for the normal development of several tissues, their role in the cardiovascular system is poorly understood. In this study, we characterized the cardiovascular progenitor cell (CPC) niche in developing human and mouse hearts, identifying signaling pathways and extracellular matrix (ECM) proteins that are crucial for CPC maintenance and expansion. We demonstrate that collagen IV (ColIV) and β-catenin-dependent signaling are essential for maintaining and expanding undifferentiated CPCs. Since niches are three-dimensional (3D) structures, we investigated the impact of a 3D microenvironment that mimics the in vivo niche ECM. Employing electrospinning technologies, 3D in vitro niche substrates were bioengineered to serve as culture inserts. The three-dimensionality of these structures increased mouse embryonic stem cell differentiation into CPCs when compared to 2D control cultures, which was further enhanced by incorporation of ColIV into the substrates. Inhibiting p300-dependent β-catenin signals with the small molecule IQ1 facilitated further expansion of CPCs. Our study represents an innovative approach to bioengineer cardiac niches that can serve as unique 3D in vitro systems to facilitate CPC expansion and study CPC biology., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Transplantation of cryopreserved heart valves (allografts) is limited by immune responses, inflammation, subsequent structural deterioration and an expensive infrastructure. In previous studies we demonstrated that conventional frozen cryopreservation (FC) is accompanied by serious alterations of extracellular matrix (ECM) structures. As the main culprit of the observed damages ice crystal formation was identified. Objective of this study was the application principles of cryoprotection as observed in nature, occurring in animals or plants, for ice-free cryopreservation (IFC) of heart valves. Using IFC, valves were processed and stored above the glass transition temperature of the cryoprotectant formulation (-124 degrees C) at -80 degrees C to avoid any ice formation, tissue-glass cracking and preserving ECM. After implantation in the orthotopic pulmonary position in sheep, we demonstrate that IFC resulted in cell free matrices, while maintaining crucial ECM-components such as elastin and collagen, translating into superior hemodynamics. In contrast, we reveal that FC valves showed ECM damage that was not restored in vivo, and T-cell inflammation of the stroma with significant leaflet thickening. Compared to currently applied FC practice IFC also reduced infrastructural needs for preservation, storage and shipping. These results have important implications for clinical valve transplantation including the promise of better long-term function and lower costs., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Decellularized xenogeneic tissue represents an interesting material for heart valve tissue engineering. The prospect objective is removal of all viable cells while preserving extracellular matrix (ECM) integrity. The major concerns of all decellularization protocols remain ECM disruption, immunogenicity and thrombogenicity. Accordingly the aim of this study was visualization of ultrastructural ECM disruption and human immune response and thrombogenicity using different decellularization protocols of porcine heart valves. Porcine pulmonary leaflets were decellularized with four different protocols: sodium deoxycholate, sodium dedecylsulfate, trypsin/EDTA, and trypsin-detergent-nuclease. Then the tissues were processed for histology and two-photon laser scanning microscopy (LSM). For thrombogenicity and immunogenicity testing tissues were incubated with human blood. The histological examination revealed no remaining cells and no significant differences in the ECM histoarchitecture in any group. LSM detected significant ECM alterations in all groups except sodium deoxycholate group with an almost completely preserved ECM. There was no increased immunogenicity between fresh and decellularized tissue. Compared to GA-fixed tissue however significantly increased immune responses and thrombogenicity was observed in all protocols. From our experiment, sodium deoxycholate enables cell removal with almost complete preservation of ECM structures. And all of these four decellularization protocols affected human immunological response and increased thrombogenicity., (Copyright 2009 Elsevier Ltd. All rights reserved.)

Synthetic polymers or naturally-derived extracellular matrix (ECM) proteins have been used to create tissue engineering scaffolds; however, the need for surface modification in order to achieve polymer biocompatibility and the lack of biomechanical strength of constructs built using proteins alone remain major limitations. To overcome these obstacles, we developed novel hybrid constructs composed of both strong biosynthetic materials and natural human ECM proteins. Taking advantage of the ability of cells to produce their own ECM, human foreskin fibroblasts were grown on silicon-based nanostructures exhibiting various surface topographies that significantly enhanced ECM protein production. After 4 weeks, cell-derived sheets were harvested and histology, immunochemistry, biochemistry and multiphoton imaging revealed the presence of collagens, tropoelastin, fibronectin and glycosaminoglycans. Following decellularization, purified sheet-derived ECM proteins were mixed with poly(epsilon-caprolactone) to create fibrous scaffolds using electrospinning. These hybrid scaffolds exhibited excellent biomechanical properties with fiber and pore sizes that allowed attachment and migration of adipose tissue-derived stem cells. Our study represents an innovative approach to generate strong, non-cytotoxic scaffolds that could have broad applications in tissue regeneration strategies.

Electrospinning using natural proteins or synthetic polymers is a promising technique for the fabrication of fibrous scaffolds for various tissue engineering applications. However, one limitation of scaffolds electrospun from natural proteins is the need to cross-link with glutaraldehyde for stability, which has been postulated to lead to many complications in vivo including graft failure. In this study, we determined the characteristics of hybrid scaffolds composed of natural proteins including collagen and elastin, as well as gelatin, and the synthetic polymer poly(epsilon-caprolactone) (PCL), so to avoid chemical cross-linking. Fiber size increased proportionally with increasing protein and polymer concentrations, whereas pore size decreased. Electrospun gelatin/PCL scaffolds showed a higher tensile strength when compared to collagen/elastin/PCL constructs. To determine the effects of pore size on cell attachment and migration, both hybrid scaffolds were seeded with adipose-derived stem cells. Scanning electron microscopy and nuclei staining of cell-seeded scaffolds demonstrated the complete cell attachment to the surfaces of both hybrid scaffolds, although cell migration into the scaffold was predominantly seen in the gelatin/PCL hybrid. The combination of natural proteins and synthetic polymers to create electrospun fibrous structures resulted in scaffolds with favorable mechanical and biological properties.

Due to human valve (allograft) scarcity, the concept of decellularization of xenogeneic valves is currently pursued. The two current concepts of guided tissue regeneration and tissue engineering are critically discussed. While guided tissue regeneration shows promising results in animal experiments, there is no scientific evidence that the obtained results might be transferred to the human. The approach of tissue engineering using decellularized xenogeneic heart valves bears enormous potential, however, numerous issues need to be studied and clarified prior potential clinical application.