Search

In order to cope with the problems of energy shortage and environmental pollution, carbon emissions need to be reduced and so the structure of the power grid is constantly being optimized. Traditional centralized power networks are not as capable of controlling and distributing non-renewable energy as distributed power grids. Therefore, the optimal dispatch of microgrids faces increasing challenges. This paper proposes a multi-strategy fusion slime mould algorithm (MFSMA) to tackle the microgrid optimal dispatching problem. Traditional swarm intelligence algorithms suffer from slow convergence, low efficiency, and the risk of falling into local optima. The MFSMA employs reverse learning to enlarge the search space and avoid local optima to overcome these challenges. Furthermore, adaptive parameters ensure a thorough search during the algorithm iterations. The focus is on exploring the solution space in the early stages of the algorithm, while convergence is accelerated during the later stages to ensure efficiency and accuracy. The salp swarm algorithm's search mode is also incorporated to expedite convergence. MFSMA and other algorithms are compared on the benchmark functions, and the test showed that the effect of MFSMA is better. Simulation results demonstrate the superior performance of the MFSMA for function optimization, particularly in solving the 24 h microgrid optimal scheduling problem. This problem considers multiple energy sources such as wind turbines, photovoltaics, and energy storage. A microgrid model based on the MFSMA is established in this paper. Simulation of the proposed algorithm reveals its ability to enhance energy utilization efficiency, reduce total network costs, and minimize environmental pollution. The contributions of this paper are as follows: (1) A comprehensive microgrid dispatch model is proposed. (2) Environmental costs, operation and maintenance costs are taken into consideration. (3) Two modes of grid-tied operation and island operation are considered. (4) This paper uses a multi-strategy optimized slime mould algorithm to optimize scheduling, and the algorithm has excellent results. [ABSTRACT FROM AUTHOR]

The besiege and conquer algorithm has shown excellent performance in single-objective optimization problems. However, there is no literature on the research of the BCA algorithm on multi-objective optimization problems. Therefore, this paper proposes a new multi-objective besiege and conquer algorithm to solve multi-objective optimization problems. The grid mechanism, archiving mechanism, and leader selection mechanism are integrated into the BCA to estimate the Pareto optimal solution and approach the Pareto optimal frontier. The proposed algorithm is tested with MOPSO, MOEA/D, and NSGAIII on the benchmark function IMOP and ZDT. The experiment results show that the proposed algorithm can obtain competitive results in terms of the accuracy of the Pareto optimal solution. [ABSTRACT FROM AUTHOR]

The traditional golden jackal optimization algorithm (GJO) has slow convergence speed, insufficient accuracy, and weakened optimization ability in the process of finding the optimal solution. At the same time, it is easy to fall into local extremes and other limitations. In this paper, a novel golden jackal optimization algorithm (SCMGJO) combining sine–cosine and Cauchy mutation is proposed. On one hand, tent mapping reverse learning is introduced in population initialization, and sine and cosine strategies are introduced in the update of prey positions, which enhances the global exploration ability of the algorithm. On the other hand, the introduction of Cauchy mutation for perturbation and update of the optimal solution effectively improves the algorithm's ability to obtain the optimal solution. Through the optimization experiment of 23 benchmark test functions, the results show that the SCMGJO algorithm performs well in convergence speed and accuracy. In addition, the stretching/compression spring design problem, three-bar truss design problem, and unmanned aerial vehicle path planning problem are introduced for verification. The experimental results prove that the SCMGJO algorithm has superior performance compared with other intelligent optimization algorithms and verify its application ability in engineering applications. [ABSTRACT FROM AUTHOR]

The Artificial Electric Field Algorithm (AEFA) stands out as a physics-inspired metaheuristic, drawing inspiration from Coulomb's law and electrostatic force; however, while AEFA has demonstrated efficacy, it can face challenges such as convergence issues and suboptimal solutions, especially in high-dimensional problems. To overcome these challenges, this paper introduces a modified version of AEFA, named mAEFA, which leverages the capabilities of Lévy flights, simulated annealing, and the Adaptive s-best Mutation and Natural Survivor Method (NSM) mechanisms. While Lévy flights enhance exploration potential and simulated annealing improves search exploitation, the Adaptive s-best Mutation and Natural Survivor Method (NSM) mechanisms are employed to add more diversity. The integration of these mechanisms in AEFA aims to expand its search space, enhance exploration potential, avoid local optima, and achieve improved performance, robustness, and a more equitable equilibrium between local intensification and global diversification. In this study, a comprehensive assessment of mAEFA is carried out, employing a combination of quantitative and qualitative measures, on a diverse range of 29 intricate CEC'17 constraint benchmarks that exhibit different characteristics. The practical compatibility of the proposed mAEFA is evaluated on five engineering benchmark problems derived from the civil, mechanical, and industrial engineering domains. Results from the mAEFA algorithm are compared with those from seven recently introduced metaheuristic algorithms using widely adopted statistical metrics. The mAEFA algorithm outperforms the LCA algorithm in all 29 CEC'17 test functions with 100% superiority and shows better results than SAO, GOA, CHIO, PSO, GSA, and AEFA in 96.6%, 96.6%, 93.1%, 86.2%, 82.8%, and 58.6% of test cases, respectively. In three out of five engineering design problems, mAEFA outperforms all the compared algorithms, securing second place in the remaining two problems. Results across all optimization problems highlight the effectiveness and robustness of mAEFA compared to baseline metaheuristics. The suggested enhancements in AEFA have proven effective, establishing competitiveness in diverse optimization problems. [ABSTRACT FROM AUTHOR]

In numerous scientific disciplines and practical applications, addressing optimization challenges is a common imperative. Nature-inspired optimization algorithms represent a highly valuable and pragmatic approach to tackling these complexities. This paper introduces Dendritic Growth Optimization (DGO), a novel algorithm inspired by natural branching patterns. DGO offers a novel solution for intricate optimization problems and demonstrates its efficiency in exploring diverse solution spaces. The algorithm has been extensively tested with a suite of machine learning algorithms, deep learning algorithms, and metaheuristic algorithms, and the results, both before and after optimization, unequivocally support the proposed algorithm's feasibility, effectiveness, and generalizability. Through empirical validation using established datasets like diabetes and breast cancer, the algorithm consistently enhances model performance across various domains. Beyond its working and experimental analysis, DGO's wide-ranging applications in machine learning, logistics, and engineering for solving real-world problems have been highlighted. The study also considers the challenges and practical implications of implementing DGO in multiple scenarios. As optimization remains crucial in research and industry, DGO emerges as a promising avenue for innovation and problem solving. [ABSTRACT FROM AUTHOR]

Compared to terrestrial transportation systems, the expansion of urban traffic into airspace can not only mitigate traffic congestion, but also foster establish eco-friendly transportation networks. Additionally, unmanned aerial vehicle (UAV) task allocation and trajectory planning are essential research topics for an Urban Air Mobility (UAM) scenario. However, heterogeneous tasks, temporary flight restriction zones, physical buildings, and environment prerequisites put forward challenges for the research. In this paper, multigene and improved anti-collision RRT* (IAC-RRT*) algorithms are proposed to address the challenge of task allocation and path planning problems in UAM scenarios by tailoring the chance of crossover and mutation. It is proved that multigene and IAC-RRT* algorithms can effectively minimize energy consumption and tasks' completion duration of UAVs. Simulation results demonstrate that the strategy of this work surpasses traditional optimization algorithms, i.e., RRT algorithm and gene algorithm, in terms of numerical stability and convergence speed. [ABSTRACT FROM AUTHOR]

There are a lot of multi-objective optimization problems (MOPs) in the real world, and many multi-objective evolutionary algorithms (MOEAs) have been presented to solve MOPs. However, obtaining non-dominated solutions that trade off convergence and diversity remains a major challenge for a MOEA. To solve this problem, this paper designs an efficient multi-objective sine cosine algorithm based on a competitive mechanism (CMOSCA). In the CMOSCA, the ranking relies on non-dominated sorting, and the crowding distance rank is utilized to choose the outstanding agents, which are employed to guide the evolution of the SCA. Furthermore, a competitive mechanism stemming from the shift-based density estimation approach is adopted to devise a new position updating operator for creating offspring agents. In each competition, two agents are randomly selected from the outstanding agents, and the winner of the competition is integrated into the position update scheme of the SCA. The performance of our proposed CMOSCA was first verified on three benchmark suites (i.e., DTLZ, WFG, and ZDT) with diversity characteristics and compared with several MOEAs. The experimental results indicated that the CMOSCA can obtain a Pareto-optimal front with better convergence and diversity. Finally, the CMOSCA was applied to deal with several engineering design problems taken from the literature, and the statistical results demonstrated that the CMOSCA is an efficient and effective approach for engineering design problems. [ABSTRACT FROM AUTHOR]

Population-based metaheuristics can be seen as a set of agents that smartly explore the space of solutions of a given optimization problem. These agents are commonly governed by movement operators that decide how the exploration is driven. Although metaheuristics have successfully been used for more than 20 years, performing rapid and high-quality parameter control is still a main concern. For instance, deciding the proper population size yielding a good balance between quality of results and computing time is constantly a hard task, even more so in the presence of an unexplored optimization problem. In this paper, we propose a self-adaptive strategy based on the on-line population balance, which aims for improvements in the performance and search process on population-based algorithms. The design behind the proposed approach relies on three different components. Firstly, an optimization-based component which defines all metaheuristic tasks related to carry out the resolution of the optimization problems. Secondly, a learning-based component focused on transforming dynamic data into knowledge in order to influence the search in the solution space. Thirdly, a probabilistic-based selector component is designed to dynamically adjust the population. We illustrate an extensive experimental process on large instance sets from three well-known discrete optimization problems: Manufacturing Cell Design Problem, Set covering Problem, and Multidimensional Knapsack Problem. The proposed approach is able to compete against classic, autonomous, as well as IRace-tuned metaheuristics, yielding interesting results and potential future work regarding dynamically adjusting the number of solutions interacting on different times within the search process. [ABSTRACT FROM AUTHOR]

The slime mould algorithm (SMA) is a new swarm intelligence algorithm inspired by the oscillatory behavior of slime moulds during foraging. Numerous researchers have widely applied the SMA and its variants in various domains in the field and proved its value by conducting various literatures. In this paper, a comprehensive review of the SMA is introduced, which is based on 130 articles obtained from Google Scholar between 2022 and 2023. In this study, firstly, the SMA theory is described. Secondly, the improved SMA variants are provided and categorized according to the approach used to apply them. Finally, we also discuss the main applications domains of the SMA, such as engineering optimization, energy optimization, machine learning, network, scheduling optimization, and image segmentation. This review presents some research suggestions for researchers interested in this algorithm, such as conducting additional research on multi-objective and discrete SMAs and extending this to neural networks and extreme learning machining. [ABSTRACT FROM AUTHOR]

Since the mention of the Fourth Industrial Revolution in 2016, quantum computers and quantum computing (QC) have emerged as key technologies. Many researchers are trying to realize quantum computers and quantum computing. In particular, most of the development and application of metaheuristics algorithms using quantum computing is focused on computer engineering fields. Cases in which the developed algorithm is applied to the optimal design of a building or the optimal design results presented by expanding the algorithm in various directions are very insufficient. Therefore, in this paper, we proposed four methods of adopting qubits to perform pitch adjusting in the optimization process of the QbHS (quantum-based harmony search) algorithm and applied it to TTO (truss topology optimization) using four methods to compare the results. The four methods of adopting qubits have the same or decreased number of qubits adopted as the number of iterations changes. As a result of applying TTO using four methods, convergence performance differed depending on the adoption method, and convergence performance was superior to conventional HS (harmony search) algorithms in all methods. The optimal design of structural engineering using such QC is expected to contribute to the revitalization of future technologies in the architectural field and the field of computer information systems. [ABSTRACT FROM AUTHOR]

With the rise and development of autonomy and intelligence technologies, UAVs will have increasingly significant applications in the future. It is very important to solve the problem of low-altitude penetration of UAVs to protect national territorial security. Based on an S-57 electronic chart file, the land, island, and threat information for an actual combat environment is parsed, extracted, and rasterized to construct a marine combat environment for UAV flight simulation. To address the problem of path planning for low-altitude penetration in complex environments, a photosensitivity-enhanced plant growth algorithm (PEPG) is proposed. Based on the plant growth path planning algorithm (PGPP), the proposed algorithm improves upon the light intensity preprocessing and light intensity calculation methods. Moreover, the kinematic constraints of the UAV, such as the turning angle, are also considered. The planned path that meets the safety flight requirements of the UAV is smoother than that of the original algorithm, and the length is reduced by at least 8.2%. Finally, simulation tests are carried out with three common path planning algorithms, namely, A*, RRT, and GA. The results show that the PEPG algorithm is superior to the other three algorithms in terms of the path length and path quality, and the feasibility and safety of the path are verified via the autonomous tracking flight of a UAV. [ABSTRACT FROM AUTHOR]

As the fields of engineering, energy, and geology become increasingly complex, decision makers face escalating challenges that require skilled solutions to meet practical production needs. Evolutionary algorithms, inspired by biological evolution, have emerged as powerful methods for tackling intricate optimization problems without relying on gradient data. Among these, the tree-seed algorithm (TSA) distinguishes itself due to its unique mechanism and efficient searching capabilities. However, an imbalance between its exploitation and exploration phases can lead it to be stuck in local optima, impeding the discovery of globally optimal solutions. This study introduces an improved TSA that incorporates water-cycling and quantum rotation-gate mechanisms. These enhancements assist the algorithm in escaping local peaks and achieving a more harmonious balance between its exploitation and exploration phases. Comparative experimental evaluations, using the CEC 2017 benchmarks and a well-known metaheuristic algorithm, demonstrate the upgraded algorithm's faster convergence rate and enhanced ability to locate global optima. Additionally, its application in optimizing reservoir production models underscores its superior performance compared to competing methods, further validating its real-world optimization capabilities. [ABSTRACT FROM AUTHOR]

The traditional Model-Based Reinforcement Learning (MBRL) algorithm has high computational cost, poor convergence, and poor performance in robot spatial cognition and navigation tasks, and it cannot fully explain the ability of animals to quickly adapt to environmental changes and learn a variety of complex tasks. Studies have shown that vicarious trial and error (VTE) and the hippocampus forward prediction mechanism in rats and other mammals can be used as key components of action selection in MBRL to support "goal-oriented" behavior. Therefore, we propose an improved Dyna-Q algorithm inspired by the forward prediction mechanism of the hippocampus to solve the above problems and tackle the exploration–exploitation dilemma of Reinforcement Learning (RL). This algorithm alternately presents the potential path in the future for mobile robots and dynamically adjusts the sweep length according to the decision certainty, so as to determine action selection. We test the performance of the algorithm in a two-dimensional maze environment with static and dynamic obstacles, respectively. Compared with classic RL algorithms like State-Action-Reward-State-Action (SARSA) and Dyna-Q, the algorithm can speed up spatial cognition and improve the global search ability of path planning. In addition, our method reflects key features of how the brain organizes MBRL to effectively solve difficult tasks such as navigation, and it provides a new idea for spatial cognitive tasks from a biological perspective. [ABSTRACT FROM AUTHOR]

In the complex and dynamic landscape of cyber threats, organizations require sophisticated strategies for managing Cybersecurity Operations Centers and deploying Security Information and Event Management systems. Our study enhances these strategies by integrating the precision of well-known biomimetic optimization algorithms—namely Particle Swarm Optimization, the Bat Algorithm, the Gray Wolf Optimizer, and the Orca Predator Algorithm—with the adaptability of Deep Q-Learning, a reinforcement learning technique that leverages deep neural networks to teach algorithms optimal actions through trial and error in complex environments. This hybrid methodology targets the efficient allocation and deployment of network intrusion detection sensors while balancing cost-effectiveness with essential network security imperatives. Comprehensive computational tests show that versions enhanced with Deep Q-Learning significantly outperform their native counterparts, especially in complex infrastructures. These results highlight the efficacy of integrating metaheuristics with reinforcement learning to tackle complex optimization challenges, underscoring Deep Q-Learning's potential to boost cybersecurity measures in rapidly evolving threat environments. [ABSTRACT FROM AUTHOR]

The Dung beetle optimization (DBO) algorithm, devised by Jiankai Xue in 2022, is known for its strong optimization capabilities and fast convergence. However, it does have certain limitations, including insufficiently random population initialization, slow search speed, and inadequate global search capabilities. Drawing inspiration from the mathematical properties of the Sinh and Cosh functions, we proposed a new metaheuristic algorithm, Sinh–Cosh Dung Beetle Optimization (SCDBO). By leveraging the Sinh and Cosh functions to disrupt the initial distribution of DBO and balance the development of rollerball dung beetles, SCDBO enhances the search efficiency and global exploration capabilities of DBO through nonlinear enhancements. These improvements collectively enhance the performance of the dung beetle optimization algorithm, making it more adept at solving complex real-world problems. To evaluate the performance of the SCDBO algorithm, we compared it with seven typical algorithms using the CEC2017 test functions. Additionally, by successfully applying it to three engineering problems, robot arm design, pressure vessel problem, and unmanned aerial vehicle (UAV) path planning, we further demonstrate the superiority of the SCDBO algorithm. [ABSTRACT FROM AUTHOR]

Nowadays, the interaction of additive technologies and methods for designing or optimizing porous structures has yielded good results. Construction with complex microarchitectures can be created using this approach. Varying the microarchitecture leads to changes in weight and mechanical properties. However, there are problems with geometry reconstruction when dealing with complex microarchitecture. One approach is to use Voronoi cells for geometry reconstruction. In this article, an extension of the Voronoi diagram algorithm to orthotropic space for material structural design is presented. The inputs for the method include porosity, ellipticity, and ellipticity direction fields. As an example, a beam with fixed end faces and center kinematic loading was used. To estimate robust results for different numbers of clusters, 50, 75, and 100 clusters are presented. The porosity for smoothed structures ranged from 21.5% up to 22.8%. The stress–strain state was determined for the resulting structures. The stiffness for the initial and smoothed structures was the same. However, in the case of 75 and 100 clusters, local stress factors appeared in the smoothed structure. The maximum von Mises stress decreased by 20% for all smoothed structures in the area of kinematic loading and increased by 20% for all smoothed structures in the area of end faces. [ABSTRACT FROM AUTHOR]

The exploration of premium and new locations is regarded as a fundamental function of every evolutionary algorithm. This is achieved using the crossover and mutation stages of the differential evolution (DE) method. A best-and-worst position-guided novel exploration approach for the DE algorithm is provided in this study. The proposed version, known as "Improved DE with Best and Worst positions (IDEBW)", offers a more advantageous alternative for exploring new locations, either proceeding directly towards the best location or evacuating the worst location. The performance of the proposed IDEBW is investigated and compared with other DE variants and meta-heuristics algorithms based on 42 benchmark functions, including 13 classical and 29 non-traditional IEEE CEC-2017 test functions and 3 real-life applications of the IEEE CEC-2011 test suite. The results prove that the proposed approach successfully completes its task and makes the DE algorithm more efficient. [ABSTRACT FROM AUTHOR]

The Aquila Optimizer (AO) is a metaheuristic algorithm that is inspired by the hunting behavior of the Aquila bird. The AO approach has been proven to perform effectively on a range of benchmark optimization issues. However, the AO algorithm may suffer from limited exploration ability in specific situations. To increase the exploration ability of the AO algorithm, this work offers a hybrid approach that employs the alpha position of the Grey Wolf Optimizer (GWO) to drive the search process of the AO algorithm. At the same time, we applied the quasi-opposition-based learning (QOBL) strategy in each phase of the Aquila Optimizer algorithm. This strategy develops quasi-oppositional solutions to current solutions. The quasi-oppositional solutions are then utilized to direct the search phase of the AO algorithm. The GWO method is also notable for its resistance to noise. This means that it can perform effectively even when the objective function is noisy. The AO algorithm, on the other hand, may be sensitive to noise. By integrating the GWO approach into the AO algorithm, we can strengthen its robustness to noise, and hence, improve its performance in real-world issues. In order to evaluate the effectiveness of the technique, the algorithm was benchmarked on 23 well-known test functions and CEC2017 test functions and compared with other popular metaheuristic algorithms. The findings demonstrate that our proposed method has excellent efficacy. Finally, it was applied to five practical engineering issues, and the results showed that the technique is suitable for tough problems with uncertain search spaces. [ABSTRACT FROM AUTHOR]

In the optimization field, the ability to efficiently tackle complex and high-dimensional problems remains a persistent challenge. Metaheuristic algorithms, with a particular emphasis on their autonomous variants, are emerging as promising tools to overcome this challenge. The term "autonomous" refers to these variants' ability to dynamically adjust certain parameters based on their own outcomes, without external intervention. The objective is to leverage the advantages and characteristics of an unsupervised machine learning clustering technique to configure the population parameter with autonomous behavior, and emphasize how we incorporate the characteristics of search space clustering to enhance the intensification and diversification of the metaheuristic. This allows dynamic adjustments based on its own outcomes, whether by increasing or decreasing the population in response to the need for diversification or intensification of solutions. In this manner, it aims to imbue the metaheuristic with features for a broader search of solutions that can yield superior results. This study provides an in-depth examination of autonomous metaheuristic algorithms, including Autonomous Particle Swarm Optimization, Autonomous Cuckoo Search Algorithm, and Autonomous Bat Algorithm. We submit these algorithms to a thorough evaluation against their original counterparts using high-density functions from the well-known CEC LSGO benchmark suite. Quantitative results revealed performance enhancements in the autonomous versions, with Autonomous Particle Swarm Optimization consistently outperforming its peers in achieving optimal minimum values. Autonomous Cuckoo Search Algorithm and Autonomous Bat Algorithm also demonstrated noteworthy advancements over their traditional counterparts. A salient feature of these algorithms is the continuous nature of their population, which significantly bolsters their capability to navigate complex and high-dimensional search spaces. However, like all methodologies, there were challenges in ensuring consistent performance across all test scenarios. The intrinsic adaptability and autonomous decision making embedded within these algorithms herald a new era of optimization tools suited for complex real-world challenges. In sum, this research accentuates the potential of autonomous metaheuristics in the optimization arena, laying the groundwork for their expanded application across diverse challenges and domains. We recommend further explorations and adaptations of these autonomous algorithms to fully harness their potential. [ABSTRACT FROM AUTHOR]

Clustering is an unsupervised learning method. Density Peak Clustering (DPC), a density-based algorithm, intuitively determines the number of clusters and identifies clusters of arbitrary shapes. However, it cannot function effectively without the correct parameter, referred to as the cutoff distance (dc). The traditional DPC algorithm exhibits noticeable shortcomings in the initial setting of dc when confronted with different datasets, necessitating manual readjustment. To solve this defect, we propose a new algorithm where we integrate DPC with the Black Widow Optimization Algorithm (BWOA), named Black Widow Density Peaks Clustering (BWDPC), to automatically optimize dc for maximizing accuracy, achieving automatic determination of dc. In the experiment, BWDPC is used to compare with three other algorithms on six synthetic data and six University of California Irvine (UCI) datasets. The results demonstrate that the proposed BWDPC algorithm more accurately identifies density peak points (cluster centers). Moreover, BWDPC achieves superior clustering results. Therefore, BWDPC represents an effective improvement over DPC. [ABSTRACT FROM AUTHOR]