Search

In order to cope with the problems of energy shortage and environmental pollution, carbon emissions need to be reduced and so the structure of the power grid is constantly being optimized. Traditional centralized power networks are not as capable of controlling and distributing non-renewable energy as distributed power grids. Therefore, the optimal dispatch of microgrids faces increasing challenges. This paper proposes a multi-strategy fusion slime mould algorithm (MFSMA) to tackle the microgrid optimal dispatching problem. Traditional swarm intelligence algorithms suffer from slow convergence, low efficiency, and the risk of falling into local optima. The MFSMA employs reverse learning to enlarge the search space and avoid local optima to overcome these challenges. Furthermore, adaptive parameters ensure a thorough search during the algorithm iterations. The focus is on exploring the solution space in the early stages of the algorithm, while convergence is accelerated during the later stages to ensure efficiency and accuracy. The salp swarm algorithm's search mode is also incorporated to expedite convergence. MFSMA and other algorithms are compared on the benchmark functions, and the test showed that the effect of MFSMA is better. Simulation results demonstrate the superior performance of the MFSMA for function optimization, particularly in solving the 24 h microgrid optimal scheduling problem. This problem considers multiple energy sources such as wind turbines, photovoltaics, and energy storage. A microgrid model based on the MFSMA is established in this paper. Simulation of the proposed algorithm reveals its ability to enhance energy utilization efficiency, reduce total network costs, and minimize environmental pollution. The contributions of this paper are as follows: (1) A comprehensive microgrid dispatch model is proposed. (2) Environmental costs, operation and maintenance costs are taken into consideration. (3) Two modes of grid-tied operation and island operation are considered. (4) This paper uses a multi-strategy optimized slime mould algorithm to optimize scheduling, and the algorithm has excellent results. [ABSTRACT FROM AUTHOR]

The traditional golden jackal optimization algorithm (GJO) has slow convergence speed, insufficient accuracy, and weakened optimization ability in the process of finding the optimal solution. At the same time, it is easy to fall into local extremes and other limitations. In this paper, a novel golden jackal optimization algorithm (SCMGJO) combining sine–cosine and Cauchy mutation is proposed. On one hand, tent mapping reverse learning is introduced in population initialization, and sine and cosine strategies are introduced in the update of prey positions, which enhances the global exploration ability of the algorithm. On the other hand, the introduction of Cauchy mutation for perturbation and update of the optimal solution effectively improves the algorithm's ability to obtain the optimal solution. Through the optimization experiment of 23 benchmark test functions, the results show that the SCMGJO algorithm performs well in convergence speed and accuracy. In addition, the stretching/compression spring design problem, three-bar truss design problem, and unmanned aerial vehicle path planning problem are introduced for verification. The experimental results prove that the SCMGJO algorithm has superior performance compared with other intelligent optimization algorithms and verify its application ability in engineering applications. [ABSTRACT FROM AUTHOR]

The Artificial Electric Field Algorithm (AEFA) stands out as a physics-inspired metaheuristic, drawing inspiration from Coulomb's law and electrostatic force; however, while AEFA has demonstrated efficacy, it can face challenges such as convergence issues and suboptimal solutions, especially in high-dimensional problems. To overcome these challenges, this paper introduces a modified version of AEFA, named mAEFA, which leverages the capabilities of Lévy flights, simulated annealing, and the Adaptive s-best Mutation and Natural Survivor Method (NSM) mechanisms. While Lévy flights enhance exploration potential and simulated annealing improves search exploitation, the Adaptive s-best Mutation and Natural Survivor Method (NSM) mechanisms are employed to add more diversity. The integration of these mechanisms in AEFA aims to expand its search space, enhance exploration potential, avoid local optima, and achieve improved performance, robustness, and a more equitable equilibrium between local intensification and global diversification. In this study, a comprehensive assessment of mAEFA is carried out, employing a combination of quantitative and qualitative measures, on a diverse range of 29 intricate CEC'17 constraint benchmarks that exhibit different characteristics. The practical compatibility of the proposed mAEFA is evaluated on five engineering benchmark problems derived from the civil, mechanical, and industrial engineering domains. Results from the mAEFA algorithm are compared with those from seven recently introduced metaheuristic algorithms using widely adopted statistical metrics. The mAEFA algorithm outperforms the LCA algorithm in all 29 CEC'17 test functions with 100% superiority and shows better results than SAO, GOA, CHIO, PSO, GSA, and AEFA in 96.6%, 96.6%, 93.1%, 86.2%, 82.8%, and 58.6% of test cases, respectively. In three out of five engineering design problems, mAEFA outperforms all the compared algorithms, securing second place in the remaining two problems. Results across all optimization problems highlight the effectiveness and robustness of mAEFA compared to baseline metaheuristics. The suggested enhancements in AEFA have proven effective, establishing competitiveness in diverse optimization problems. [ABSTRACT FROM AUTHOR]

In numerous scientific disciplines and practical applications, addressing optimization challenges is a common imperative. Nature-inspired optimization algorithms represent a highly valuable and pragmatic approach to tackling these complexities. This paper introduces Dendritic Growth Optimization (DGO), a novel algorithm inspired by natural branching patterns. DGO offers a novel solution for intricate optimization problems and demonstrates its efficiency in exploring diverse solution spaces. The algorithm has been extensively tested with a suite of machine learning algorithms, deep learning algorithms, and metaheuristic algorithms, and the results, both before and after optimization, unequivocally support the proposed algorithm's feasibility, effectiveness, and generalizability. Through empirical validation using established datasets like diabetes and breast cancer, the algorithm consistently enhances model performance across various domains. Beyond its working and experimental analysis, DGO's wide-ranging applications in machine learning, logistics, and engineering for solving real-world problems have been highlighted. The study also considers the challenges and practical implications of implementing DGO in multiple scenarios. As optimization remains crucial in research and industry, DGO emerges as a promising avenue for innovation and problem solving. [ABSTRACT FROM AUTHOR]

Compared to terrestrial transportation systems, the expansion of urban traffic into airspace can not only mitigate traffic congestion, but also foster establish eco-friendly transportation networks. Additionally, unmanned aerial vehicle (UAV) task allocation and trajectory planning are essential research topics for an Urban Air Mobility (UAM) scenario. However, heterogeneous tasks, temporary flight restriction zones, physical buildings, and environment prerequisites put forward challenges for the research. In this paper, multigene and improved anti-collision RRT* (IAC-RRT*) algorithms are proposed to address the challenge of task allocation and path planning problems in UAM scenarios by tailoring the chance of crossover and mutation. It is proved that multigene and IAC-RRT* algorithms can effectively minimize energy consumption and tasks' completion duration of UAVs. Simulation results demonstrate that the strategy of this work surpasses traditional optimization algorithms, i.e., RRT algorithm and gene algorithm, in terms of numerical stability and convergence speed. [ABSTRACT FROM AUTHOR]

There are a lot of multi-objective optimization problems (MOPs) in the real world, and many multi-objective evolutionary algorithms (MOEAs) have been presented to solve MOPs. However, obtaining non-dominated solutions that trade off convergence and diversity remains a major challenge for a MOEA. To solve this problem, this paper designs an efficient multi-objective sine cosine algorithm based on a competitive mechanism (CMOSCA). In the CMOSCA, the ranking relies on non-dominated sorting, and the crowding distance rank is utilized to choose the outstanding agents, which are employed to guide the evolution of the SCA. Furthermore, a competitive mechanism stemming from the shift-based density estimation approach is adopted to devise a new position updating operator for creating offspring agents. In each competition, two agents are randomly selected from the outstanding agents, and the winner of the competition is integrated into the position update scheme of the SCA. The performance of our proposed CMOSCA was first verified on three benchmark suites (i.e., DTLZ, WFG, and ZDT) with diversity characteristics and compared with several MOEAs. The experimental results indicated that the CMOSCA can obtain a Pareto-optimal front with better convergence and diversity. Finally, the CMOSCA was applied to deal with several engineering design problems taken from the literature, and the statistical results demonstrated that the CMOSCA is an efficient and effective approach for engineering design problems. [ABSTRACT FROM AUTHOR]

Population-based metaheuristics can be seen as a set of agents that smartly explore the space of solutions of a given optimization problem. These agents are commonly governed by movement operators that decide how the exploration is driven. Although metaheuristics have successfully been used for more than 20 years, performing rapid and high-quality parameter control is still a main concern. For instance, deciding the proper population size yielding a good balance between quality of results and computing time is constantly a hard task, even more so in the presence of an unexplored optimization problem. In this paper, we propose a self-adaptive strategy based on the on-line population balance, which aims for improvements in the performance and search process on population-based algorithms. The design behind the proposed approach relies on three different components. Firstly, an optimization-based component which defines all metaheuristic tasks related to carry out the resolution of the optimization problems. Secondly, a learning-based component focused on transforming dynamic data into knowledge in order to influence the search in the solution space. Thirdly, a probabilistic-based selector component is designed to dynamically adjust the population. We illustrate an extensive experimental process on large instance sets from three well-known discrete optimization problems: Manufacturing Cell Design Problem, Set covering Problem, and Multidimensional Knapsack Problem. The proposed approach is able to compete against classic, autonomous, as well as IRace-tuned metaheuristics, yielding interesting results and potential future work regarding dynamically adjusting the number of solutions interacting on different times within the search process. [ABSTRACT FROM AUTHOR]

The slime mould algorithm (SMA) is a new swarm intelligence algorithm inspired by the oscillatory behavior of slime moulds during foraging. Numerous researchers have widely applied the SMA and its variants in various domains in the field and proved its value by conducting various literatures. In this paper, a comprehensive review of the SMA is introduced, which is based on 130 articles obtained from Google Scholar between 2022 and 2023. In this study, firstly, the SMA theory is described. Secondly, the improved SMA variants are provided and categorized according to the approach used to apply them. Finally, we also discuss the main applications domains of the SMA, such as engineering optimization, energy optimization, machine learning, network, scheduling optimization, and image segmentation. This review presents some research suggestions for researchers interested in this algorithm, such as conducting additional research on multi-objective and discrete SMAs and extending this to neural networks and extreme learning machining. [ABSTRACT FROM AUTHOR]

Since the mention of the Fourth Industrial Revolution in 2016, quantum computers and quantum computing (QC) have emerged as key technologies. Many researchers are trying to realize quantum computers and quantum computing. In particular, most of the development and application of metaheuristics algorithms using quantum computing is focused on computer engineering fields. Cases in which the developed algorithm is applied to the optimal design of a building or the optimal design results presented by expanding the algorithm in various directions are very insufficient. Therefore, in this paper, we proposed four methods of adopting qubits to perform pitch adjusting in the optimization process of the QbHS (quantum-based harmony search) algorithm and applied it to TTO (truss topology optimization) using four methods to compare the results. The four methods of adopting qubits have the same or decreased number of qubits adopted as the number of iterations changes. As a result of applying TTO using four methods, convergence performance differed depending on the adoption method, and convergence performance was superior to conventional HS (harmony search) algorithms in all methods. The optimal design of structural engineering using such QC is expected to contribute to the revitalization of future technologies in the architectural field and the field of computer information systems. [ABSTRACT FROM AUTHOR]