Search

The production of biocompounds through the cultivation of filamentous microorganisms is mainly affected by Oxygen Transfer Rate (OTR) and shear rate ([Formula: see text]) conditions. Despite efforts have been made to evaluate the effect of operating variables (impeller speed, N; and airflow rate, ϕ air ) on clavulanic acid production, no analysis regarding the effect of OTR and [Formula: see text] was made. Then, the aim of this study was to evaluate the dissociated effect of physical phenomena such as oxygen transfer and shear rate in the production of clavulanic acid from Streptomyces clavuligerus using a stirred tank bioreactor. Streptomyces clavuligerus cultivations were performed at five different OTR and [Formula: see text] conditions by manipulating the operating conditions (N, ϕ air , and gas inlet composition). Cultivations performed at equal impeller speed (600 rpm, similar [Formula: see text]) using oxygen enrichment, showed that CA productivity (Prod CA ) was positively affected by OTR increase. Subsequently, the different shear conditions (achieved by varying the impeller speed) lead to an increase in CA production levels. Despite both OTR and shear rate positively enhanced CA productivity, [Formula: see text] exhibited the highest impact: an increase of 145% in OTR initial enhanced the clavulanic acid productivity of about 29%, while an increment in the shear rate of 134% raised the Prod CA in 53%.

In this study, nanofiltration with NF200 membrane was employed to remove KCl from ion-exchanged solutions containing potassium clavulanate. The pore radius of NF200 membrane was estimated to be around 0.39 nm. The effects of operating pressure on separation performance were investigated in a range of 100-400 psig. The influences of cross-flow velocity (0.14-0.70 cm/s), temperature (4-25 degrees C), and feed composition were also investigated. In all experiments, clavulanate rejection showed high levels from 0.91 to 0.99, while chloride rejection ranged from 0.06 to 0.54. In a case at an operating pressure of 50 psig and 25 degrees C, as much as 94% of clavulanate was retained while 94% of chloride was removed, indicating that NF200 membrane was a suitable choice for selectively removing KCl. NF200 membrane also showed a stable performance in the operational stability test with an ion-exchanged solution obtained by treating actual fermentation broth.