Search

Highlights: [•] Oil palm empty fruit bunches (OPEFB) are fractionated by SO2–ethanol–water mixture. [•] Fractionation of OPEFB feedstock produces cellulosic fibers and spent liquor. [•] Spent liquor contains dissolved hemicellulose sugars (mostly monomers) and lignin. [•] Fractionation and sugar hydrolysis is hindered by the high cation content of OPEFB. [•] Acidic leaching of OPEFB only partly removes cations; more intense deashing needed. [Copyright &y& Elsevier]

Abstract: The objective of this study was to optimize continuous acetone–butanol–ethanol (ABE) fermentation using a two stage chemostat system integrated with liquid–liquid extraction of solvents produced in the first stage. This minimized end product inhibition by butanol and subsequently enhanced glucose utilization and solvent production in continuous cultures of Clostridium acetobutylicum B 5313. During continuous two-stage ABE fermentation, sugarcane bagasse was used as the cell holding material for the both stages and liquid–liquid extraction was performed using an oleyl alcohol and decanol mixture. An overall solvent production of 25.32g/L (acetone 5.93g/L, butanol 16.90g/L and ethanol 2.48g/L) was observed as compared to 15.98g/L in the single stage chemostat with highest solvent productivity and solvent yield of 2.5g/Lh and of 0.35g/g, respectively. Maximum glucose utilization (83.21%) at a dilution rate of 0.051/h was observed as compared to 54.38% in the single stage chemostat. [Copyright &y& Elsevier]

Abstract: SO2–ethanol–water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79g/l using 4-fold diluted SEW liquor supplemented with 35g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12g/l was obtained at a dilution rate of 0.21h−1. The maximum solvent productivity (4.86g/lh) with yield of 0.27g/g was obtained at dilution rate of 0.64h−1. Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation. [Copyright &y& Elsevier]

SO2-ethanol-water (SEW) spent liquor from spruce chips was successfully used for batch and continuous production of acetone, butanol and ethanol (ABE). Initially, batch experiments were performed using spent liquor to check the suitability for production of ABE. Maximum concentration of total ABE was found to be 8.79 g/l using 4-fold diluted SEW liquor supplemented with 35 g/l of glucose. The effect of dilution rate on solvent production, productivity and yield was studied in column reactor consisting of immobilized Clostridium acetobutylicum DSM 792 on wood pulp. Total solvent concentration of 12 g/l was obtained at a dilution rate of 0.21 h(-1). The maximum solvent productivity (4.86 g/l h) with yield of 0.27 g/g was obtained at dilution rate of 0.64 h(-1). Further, to increase the solvent yield, the unutilized sugars were subjected to batch fermentation., (Copyright © 2011 Elsevier Ltd. All rights reserved.)