Search

[Display omitted] • Functionalized hydrochar was prepared by free radical post-synthetic modification. • Hydrochar with − N+H 2 R groups exhibited high adsorption capacity towards Cr(VI). • •Nitrogen-containing groups in hydrochar play multiple roles in adsorption procedure. Chemical modification on hydrochars can significantly improve their ability of removing heavy metal ions from wastewater, but so far no research has focused on the chemical modification through free radical reaction. In this work, a cation functionalized hydrochar (CFHC) bearing − N+H 2 R was synthesized by grafting-polymerization of glycidyl methacrylate (GMA) onto bamboo hydrochar under initiation by benzoyl peroxide, followed by the amination with the introduced epoxy group and diethylenetriamine and a subsequent hydrochloric acid treatment. The resulted CFHC exhibited a superior removal capacity of 424.09 mg·g−1 for Cr(VI), and the highest sorption occurred at pH of 2. Combining a series of characterizations and tests, it was concluded that the sorption conformed to the pseudo-second-order and Freundlich equations, indicating a multilayer chemisorption process that mainly driven by electrostatic reaction, reduction, and surface complexation. This research proved that a free radical polymerization treatment could effectively transform hydrochars into super adsorbents for wastewater treatment. [ABSTRACT FROM AUTHOR]

• A novel strategy was developed to prepare nitrogen rich biochar. • APBC has high affinity and strong sorption ability towards Pb(II). • APBC contains abundant nitrogen and oxygen-containing groups. • Sorption of Pb(II) is mainly dominant by inner–sphere surface complexation. Biochar was prepared by torrefaction of ammonium persulphate pretreated bamboo (labeled as APBC) and applied into elimination of Pb(II) from water solutions. APBC was characterized by N 2 adsorption–desorption isotherms, elemental and Zeta potential analyses, SEM-EDS, XPS, and FTIR. Abundant N- and O-containing groups appeared atop APBC. Batch sorption assays revealed that APBC had high affinity and strong sorption ability towards Pb(II). The high Pb(II) adsorbing ability was attributed to the high contents of N- and O-containing functional groups of APBC. The adsorption mechanism mainly occurred by inner–sphere surface complexation. Hence, torrefaction of ammonium persulphate pretreated bamboo is a promising strategy for producing efficient biochar that is applicable for industrial wastewater treatment. [ABSTRACT FROM AUTHOR]

Highlights • ACHC with abundant amino, hydroxyl and carboxylate groups was prepared successfully. • ACHC can remove efficiently and rapidly MB and Cu(II) from aqueous solution. • The surface chelation was mainly contribute to Cu(II) adsorption. • π-π interaction, hydrogen bond and electrostatic attraction dominated MB adsorption. Abstract The polyaminocarboxylated modified hydrochar (ACHC) was synthesized to introduce abundant amino, hydroxyl and carboxylate multifunctional groups onto the surface of hydrochar by etherification, amination and carboxylated reaction. The ACHC was systematically characterized and used to evaluate adsorption properties of Cu(II) and methylene blue (MB) by batch sorption tests. The adsorption process toward Cu(II) and MB by ACHC obeyed the pseudo-second-order kinetic model and Langmuir model. Characteristic analysis indicated the surface chelation was mainly contribute to Cu(II) adsorption by large amounts of amino and carboxylate groups while π-π interaction, hydrogen bonding and electrostatic attraction dominated MB adsorption. The maximum adsorption capacities of ACHC were 140.65 and 1238.66 mg·g−1 for Cu(II) and MB at 303 K, respectively. Approximately 97% of the adsorptive uptakes for two pollutants were removed within merely 5 min for kinetic experiment. Competitive adsorption of Cu(II) and MB, and treatment of electroplating wastewater by ACHC were also investigated. [ABSTRACT FROM AUTHOR]

Highlights • The protonated amine modified hydrochar was synthesized for anionic dye removal. • The protonated amine groups play a key role on sorption of MO by PAMH. • The electrostatic interaction is the main mechanism. • The modified hydrochar can remove efficiently MO from aqueous solution. Abstract The protonated amine modified hydrochar (PAMH) was synthesized by etherification, amination and protonated reaction with hydrochar, which was enriched with abundant protonated amine for methyl orange (MO) removal. PAMH was characterized by elemental analysis, scanning electron microscopy, nitrogen adsorption-desorption measurement, zeta potential and Fourier transform infrared. The sorption of MO from aqueous solution by PAMH was investigated by batch experiments. The results showed that sorption of MO was significantly influenced by the initial concentration of MO, temperature, contact time and ionic strength, while hardly affected by pH values ranging from 4 to 11. The pseudo-second-order and Langmuir equations were able to depict sorption kinetics and sorption isotherms, respectively. Thermodynamic analysis indicated that the sorption behavior was thermopositive and spontaneous. The maximum theoretical uptake computed by the Langmuir equation was 909.09 mg·g−1 at 303 K, which suggested that PAMH was an effective sorbent to eliminate anionic dye from aqueous solution. [ABSTRACT FROM AUTHOR]

[Display omitted] • Two biochars were prepared from APS/KPS-pretreated bamboo. • Cation types in persulfate impact physicochemical properties of biochar. • The KPS-pretreated bamboo-derived biochar has a higher adsorptive capacity for MB. • The discrepancy in adsorption capacity of two biochar for MB was analyzed. • Electrostatic action is the main adsorption mechanism for MB onto biochars. The adsorption behaviors of biochar are largely impacted by biomass feedstock. In this study, two biochars were prepared from torrefaction of ammonium persulfate- and potassium persulfate-pretreated bamboo and then activated by cold alkali, which are named as ASBC and KSBC, respectively. The two biochars were characterized by different instruments, and their adsorption properties over cationic methylene blue (MB) were compared. The type of persulfates little affected the specific surface areas, but significantly impacted O (29.54 % vs. 35.113 %) and N (12.13 % vs. 3.74 %) contents, functional groups, and zeta potentials of biochars. MB adsorption onto ASBC/KSBC is a single-layer chemical endothermic process and ASBC/KSBC exhibit high adsorption capacity over MB (475/881 mg·g−1) at 303 K. Obviously, the sorption capacity of MB onto KSBC much surpasses that of MB onto ASBC. These results indicate biomass pre-treatment is a cheap and convenient method to prepare biochars with unique physicochemical and adsorptive properties. [ABSTRACT FROM AUTHOR]

• N-doped hydrochar was synthesized by one-step hydrothermal reaction. • Cr(VI) adsorption capacity of hydrochar was enhanced by N-doping. • NH 4 Cl acts as a catalyst and a nitrogen source in preparation of N-doped hydrochar. • N-groups can adsorb Cr(VI) by electrostatic interaction and reduce Cr(VI) to Cr(III). N-doped biochar can effectively eliminate toxic Cr(VI). Here, N-doped hydrochar (NHC) was successfully synthesized by one-pot hydrothermal carbonization (HTC) of NH 4 Cl and bamboo, and employed to adsorb Cr(VI). The specific surface area, pore volume, and carbon and nitrogen contents of NHC all increase compared with the undoped hydrochar (HC). NH 4 Cl acts as a cheap nitrogen source to enhance the nitrogen content of hydrochar and as an acid catalyst to accelerate hydrochar carbonization. Adsorption experiments show NHC has higher adsorption capacity than HC for Cr(VI). XPS and FTIR imply the dominant mechanisms of adsorbing Cr(VI) onto two hydrochars are electrostatic attraction, reduction and complexation, but the contributions of surface functional groups in two hydrochars for elimination of Cr(VI) differ. The doped nitrogen in NHC is pivotal in adsorbing and reducing Cr(VI). Hence, NHC prepared from bamboo and NH 4 Cl by one-step HTC is a cheap and efficient adsorbent to eliminate aqueous Cr(VI). [ABSTRACT FROM AUTHOR]

• Co-HTC of PVC and bamboo was employed to prepare high-efficiency adsorbent. • The contents of hydroxyl and carboxyl groups of hydrochar increased during Co-HTC. • Adsorption capacity of MB on hydrochar produced by addition of PVC increased significantly. • Electrostatic and hydrogen-bonding interactions are the main mechanisms. Polyvinyl chloride (PVC) was blended into bamboo powder during co-hydrothermal carbonization (Co-HTC) to understand the effects on the physicochemical properties and adsorbing ability of hydrochar. The properties of hydrochar were characterized by Zeta potential, elemental analyses, BET, FTIR, XPS, Boehm titration and SEM. The addition of PVC into bamboo in Co-HTC decreased the BET area, and pore volume and radius of hydrochar, but increased the contents of surface hydroxyl and carboxyl groups. The adsorption ability of hydrochar produced by addition of PVC at 473 K over methylene blue (MB) increased significantly. The main adsorption mechanism was electrostatic attraction by –N(CH 3) 2 + of MB and carboxylate of hydrochar, and hydrogen-bonding interaction through N atom of phenothiazine in MB and C–OH of hydrochar. Thus, Co-HTC offers a facile, green and economical alternative for conversion of waste into high-value adsorbents. [ABSTRACT FROM AUTHOR]