Search

In this work, multivariate data analysis was employed to correlate variables of pretreatment process of lignocellulosic biomass. Principal component analysis and partial least square methods were performed to get the inner-relationship and data interpretation between the crystallinity and other parameters of mechanical refining-assisted sodium hydroxide pretreatment followed by enzymatic saccharification of corn stover. The PCA and PLS models showed that Sodium hydroxide dosage, mechanical refining treatment, lignin removal rate and crystallinity had close inner-related relationship with the efficiency of pretreatment and enzymolysis. Alkaline reaction and mechanical refining treatment had strong influence on the crystallinity. Multivariate data analysis revealed that pretreated corn stover samples with lower crystallinity were more easily hydrolyzed by enzyme and could get more final reducing sugar. This work could offer a new methodology to get further understanding of effect of crystallinity on the crop residue lignocellulosic biomass conversion process., (Copyright © 2018. Published by Elsevier Ltd.)

Liquor recycle in lignocellulosic biomass fractionation with ethanol-water has been studied. Runs have been carried out in a 6 L tank reactor with liquor recirculation. The liquors obtained in six successive fractioning operations have been analyzed together with the solid phase remnant. Experimental results revealed that the number of re-uses reduces solids recovery (from 52.2 to 42.6%) and cellulose recovery (from 28.1 to 23.3%) with minor or no effect on the hemicelluloses and lignin removal. The more remarkable effect is an increase of the glucose yield (from 76.7 to 95.3% after enzymatic hydrolysis during 72 h). The accumulation of acetic acid in the spent liquors (until 1.3 g/L) seems to be responsible of the higher enzymatic hydrolysis yield, from 76.3 (first use) to 87.7% (fifth re-use). Liquor re-use is effective to improve the sustainability of the pre-treatment obtaining a cellulose-rich solid easy to hydrolysate to sugars reducing energy consumption., (Copyright © 2019 Elsevier Ltd. All rights reserved.)

When lignocellulosic biomass was used for acetone-butanol-ethanol (ABE) fermentation, several lignocellulose-derived inhibitors, which are toxic to Clostridium acetobutylicum, were generated during acid hydrolysis process and seriously hindered the industrialization of lignocellulosic butanol. In this study, an engineered strain 824(proABC) with significantly improved tolerance to multiple lignocellulose-derived inhibitors (formic acid and phenolic compounds) was constructed by strengthening the proline biosynthesis. The engineered strain exhibited more effective synthesis ability of proline and scavenging ability of reactive oxygen species (ROS). Consequently, the butanol produced by 824(proABC) was 1-, 2.4- or 3.4-fold higher than that of the wild type strain when using the undetoxified hydrolysate of soybean straw, rice straw or corn straw as the substrate, respectively. Therefore, enhancing the proline biosynthesis can be used as an effective strategy to improve the tolerance of C. acetobutylicum to multiple lignocellulose-derived inhibitors, and 824(proABC) has great potential to produce butanol from undetoxified lignocellulosic hydrolysates., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

Thermo-chemical pretreatments of biomass typically result in environmental impacts from water use and emission. The degradation byproducts in the resulting sugars can be inhibitory to the activities of enzymes and yeasts. The results of this study showed that combining existing commercial comminution technology can reduce total energy consumption with improved saccharification yield while eliminating chemical use. Impact mill was found to be the most efficient milling for size reduction of forest residual chips from ca. 2 mm to a specific value below 100 µm. The further micronization effectively disrupted the recalcitrance of the woody biomass and produced the highly saccharifiable substrates for downstream processing. In addition, extrusion can be integrated into a clean cellulosic sugar process for further fibrillation in place of the conventional mixing processing. The highest energy efficiency was observed on the impact-milled samples with 0.515 kg sugars kWh -1 ., (Copyright © 2018 Elsevier Ltd. All rights reserved.)

A sequential two-stage pretreatment process comprising alkaline pre-extraction and alkaline hydrogen peroxide pretreatment (AHP) was investigated to convert bamboo carbohydrates into bioethanol. The results showed that mild alkaline pre-extraction using 8% (w/w) sodium hydroxide (NaOH) at 100°C for 180min followed by AHP pretreatment with 4% (w/w) hydrogen peroxide (H 2 O 2 ) was sufficient to generate a substrate that could be efficiently digested with low enzyme loadings. Moreover, alkali pre-extraction enabled the use of lower H 2 O 2 charges in AHP treatment. Two-stage pretreatment followed by enzymatic hydrolysis with only 9FPU/g cellulose led to the recovery of 87% of the original sugars in the raw feedstock. The use of the pentose-hexose fermenting Saccharomyces cerevisiae SR8u strain enabled the utilization of 95.7% sugars in the hydrolysate to reach 4.6%w/v ethanol titer. The overall process also enabled the recovery of 62.9% lignin and 93.8% silica at high levels of purity., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Chlorine dioxide (ClO 2 ) is a bleaching reagent used in paper industry. Two different types of pretreatment methods were investigated incorporating ClO 2 as a secondary reagent: (a) alkaline followed by ClO 2 treatment; (b) dilute-sulfuric acid followed ClO 2 treatment. In these methods, ClO 2 treatment has shown little effect on delignification. Scheme-a has shown a significant improvement in enzymatic digestibility of glucan far above that treated by ammonia alone. On the contrary, dilute-acid followed by ClO 2 treatment has shown negative effect on the enzymatic hydrolysis. The main factors affecting the enzymatic hydrolysis are the changes of the chemical structure of lignin and its distribution on the biomass surface. ClO 2 treatment significantly increases the carboxylic acid content and reduces phenolic groups of lignin, affecting hydrophobicity of lignin and the H-bond induced association between the enzyme and lignin. This collectively led to reduction of unproductive binding of enzyme with lignin, consequently increasing the digestibility., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Aiming for the complete utilization of bamboo biomass, an integrated process which combines ethanol production with the recovery of silica and lignin was proposed. To reduce chemical charge required for the fractionation of silica and lignin from bamboo and improve the digestibility of the obtained substrate, a sequentially two-stage pretreatment process of autohydrolysis and alkaline extraction was carried out. From the view of enhancing enzymatic hydrolysis and recovery of silica and lignin, a two-stage treatment of autohydrolysis at 180°C for 90min followed by alkaline extraction at 100°C with 6% NaOH (based on pretreated chips) for 120min was optimized. About 93.7% of original silica and 75.7% of original lignin could be recovered from bamboo. Enzymatic hydrolysis and fermentation of carbohydrates showed that an overall sugar yield of 88.6% of original sugar content and an ethanol recovery of 0.467g/g sugar were achieved based on the proposed scheme., (Copyright © 2017 Elsevier Ltd. All rights reserved.)

Pyrolysis was demonstrated to investigate the thermal decomposition characteristics and potential of lignin-rich cotton by-products cotton exocarp (CE) and spent mushroom substrate consisted of cotton by-products (MSC) for biorefineries. The chemical component and structure alteration of CE and MSC was found to affect their thermochemical behaviors. The bio-oil yield from CE was 58.13wt% while the maximum yield from MSC was 45.01% at 600°C. The phenolic compounds obtained from CE and MSC were 33.9% and 39.2%, respectively. The yield of acetic acid from MSC between 400 and 600°C was about 30-38% lower than that from CE, which suggests the high quality of bio-oil was obtained. Biochar from MSC via slow pyrolysis had a high mass yield (44.38wt%) with well-developed pore structure., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

The effect of fluid dynamic conditions on enzymatic hydrolysis of acid pretreated corn stover (PCS) has been assessed. Runs were performed in stirred tanks at several stirrer speed values, under typical conditions of temperature (50°C), pH (4.8) and solid charge (20% w/w). A complex mixture of cellulases, xylanases and mannanases was employed for PCS saccharification. At low stirring speeds (<150rpm), estimated mass transfer coefficients and rates, when compared to chemical hydrolysis rates, lead to results that clearly show low mass transfer rates, being this phenomenon the controlling step of the overall process rate. However, for stirrer speed from 300rpm upwards, the overall process rate is controlled by hydrolysis reactions. The ratio between mass transfer and overall chemical reaction rates changes with time depending on the conditions of each run., (Copyright © 2016 Elsevier Ltd. All rights reserved.)

Lignocellulosic materials are among the most promising alternative energy resources that can be utilized to produce cellulosic ethanol. However, the physical and chemical structure of lignocellulosic materials forms strong native recalcitrance and results in relatively low yield of ethanol from raw lignocellulosic materials. An appropriate pretreatment method is required to overcome this recalcitrance. For decades various pretreatment processes have been developed to improve the digestibility of lignocellulosic biomass. Each pretreatment process has a different specificity on altering the physical and chemical structure of lignocellulosic materials. In this paper, the chemical structure of lignocellulosic biomass and factors likely affect the digestibility of lignocellulosic materials are discussed, and then an overview about the most important pretreatment processes available are provided. In particular, the combined pretreatment strategies are reviewed for improving the enzymatic hydrolysis of lignocellulose and realizing the comprehensive utilization of lignocellulosic materials., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

This study presents high temperature water-only continuous flowthrough pretreatment coupled with nuclear magnetic resonance (NMR) as a promising analytical tool to examine the plant cell wall, to understand its recalcitrance (i.e., cell wall resistance to deconstruction), and to probe the chemistry occurring during batch pretreatment of biomass. (13)C-enriched corn stover stems were pretreated at 170°C for 60min with a hot-water flow rate of 20mL/min to control fractionation of the cell wall. This approach helped elucidate the nature of plant cell wall chemical recalcitrance and biomass pretreatment chemistry by tracking cell wall fragmentation as a function of time. Fractions of the reactor effluent were collected in a time-resolved fashion and characterized by various NMR techniques to determine the degree and sequence of fragments released, as well as, the chemical composition, molecular structure, and relative molecular weight of those released fragments., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

The presence of lignin in lignocellulosic biomass is correlated with its enzymatic digestibility. Their correlation and mechanism have been investigated widely but have not been elucidated clearly. In this study, hydrophilic sulfonated lignin and hydrophobic kraft lignin were introduced into the enzymatic hydrolysis process to investigate their effects on the enzymatic digestibility of different pretreated lignocellulose. The influence of lignin addition on the enzymatic digestibility varied with both introduced lignin type and the pretreatment methods of substrates. Slight enhancement of enzymatic hydrolysis was observed for all substrates by adding kraft lignin. The addition of sulfonated lignin could effectively improve the enzymatic digestibility of green liquor and acidic bisulfite pretreated materials, but had little effect on sulfite-formaldehyde pretreated samples. The enzymatic digestibility of green liquor pretreated masson pine increased from 42% without lignin addition to 75% with 0.3g/g-substrate sulfonated lignin addition., (Copyright © 2015 Elsevier Ltd. All rights reserved.)

Four fractions of one commercial sodium lignosulfonate (SXP) with different molecular weight (MW) and anionic polymers were studied to reduce non-productive adsorption of cellulase on bound lignin in a lignocellulosic substrate. SXP with higher MW had stronger blocking effect on non-productive adsorption of a commercial Trichoderma reesi cellulase cocktail (CTec2) on lignin measured by quartz crystal microgravimetry with dissipation monitoring. Linear anionic aromatic polymers have strong blocking effect, but they would also reduce CTec2 adsorption on cellulose to decrease the enzymatic activity. The copolymer of lignin and polyethylene glycol (AL-PEG1000) has strong enhancement in enzymatic hydrolysis of lignocelluloses, because it not only improves the cellulase activity to cellulose, but also blocks the non-productive cellulase adsorption on lignin. Apart from improving the cellulase activity to cellulose, the enhancements of enzymatic hydrolysis of lignocellulose by adding AL-PEG1000 and SXPs are the result of the decreased cellulase non-productive adsorption on lignin., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

To further investigate the effect of dilute acid pretreatment (DAP) and steam explosion pretreatment (SE) on the change in cellulose accessibility, several techniques were applied including a Simons' stain (SS) technique along with several NMR methods (i.e., NMR cryoporometry, (1)H spin-lattice (T1) and (1)H spin-spin (T2) relaxometry, and diffusometry). These methods were utilized to probe biomass porosity and thus assess cellulose accessibility on untreated and pretreated Populus. In general, these techniques indicate that pretreated Populus has larger pore size distributions and specific surface area (SSA) when compared to an untreated sample. The SS method revealed that DAP is more effective than SE in terms of the SSA increase, and that DAP increases SSA as a function of pretreatment severity. Relaxometry and diffusion measurements also suggest pore expansion occurs primarily in the first 10 min of DAP., (Copyright © 2013 Elsevier Ltd. All rights reserved.)

2-Methyltetrahydrofuran (MeTHF), a biomass-derived compound, is a promising medium for biocatalysis and organometallic reactions. The regioselective acylation of 8-chloroadenosine (8-Cl-Ado) and its analogs was carried out in MeTHF with immobilized Penicillium expansum lipase. The lipase displayed more than twofold higher catalytic activity and much better thermostability in MeTHF than in other organic solvents and co-solvent systems. The optimum reaction medium, enzyme dosage, molar ratio of viny ester to nucleoside and reaction temperature for the enzymatic acylation of 8-Cl-Ado were MeTHF, 25 U/mL, 7.5 and 35 °C, respectively, under which the desirable 5'-O-undecylenoyl-8-Cl-Ado was obtained with a yield of 95% and a regioselectivity of >99% in 3 h. In addition, the lipase catalyzed regioselective undecylenoylation of other purine nucleosides, producing 5'-undecylenic acid esters with moderate to high yields (63-94%) and excellent 5'-regioselectivities (94->99%). Use of biomass-derived solvents might open up novel opportunities for sustainable and greener biocatalytic processes., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

This study presents a novel, efficient and environmentally friendly process for the cooking of corn stalk that uses active oxygen (O2 and H2O2) and a recoverable solid alkali (MgO). The structural changes on the surface of corn stalk before and after cooking were characterized by attenuated total reflectance-Fourier transform infrared spectroscopy (ATR-FTIR), scanning electron microscopy (SEM), X-ray photoelectron spectroscopy (XPS) and atomic force microscopy (AFM) techniques. The results showed that lignin and extractives were effectively removed, especially those on the surface of corn stalk. Additionally, the changes included becoming fibrillar, the exposure of cellulose and hemi-cellulose and the pitting corrosion on the surface, etc. The results also showed that the removal reaction is from outside to inside, but the main reaction is possibly on the surface. Furthermore, the results of active oxygen cooking with a solid alkali are compared with those of alkaline cooking in the paper., (Copyright © 2011 Elsevier Ltd. All rights reserved.)