1. Biodiesel production by in situ transesterification of municipal primary and secondary sludges
- Author
-
Todd French, Rafael Hernandez, Andro Mondala, Kaiwen Liang, and Hossein Toghiani
- Subjects
Biodiesel ,Environmental Engineering ,Esterification ,Sewage ,Renewable Energy, Sustainability and the Environment ,Chemistry ,Bioelectric Energy Sources ,Methanol ,Bioengineering ,Sulfuric acid ,General Medicine ,Transesterification ,Pulp and paper industry ,Models, Biological ,chemistry.chemical_compound ,Bioreactors ,Wastewater ,Yield (chemistry) ,Biodiesel production ,Organic chemistry ,Computer Simulation ,Cities ,Waste Management and Disposal ,Sludge - Abstract
The potential of using municipal wastewater sludges as a lipid feedstock for biodiesel production was investigated. Primary and secondary sludge samples obtained from a municipal wastewater treatment plant in Tuscaloosa, AL were freeze-dried and subjected to an acid-catalyzed insitu transesterification process. Experiments were conducted to determine the effects of temperature, sulfuric acid concentration, and mass ratio of methanol to sludge on the yield of fatty acid methyl esters (FAMEs). Results indicated a significant interactive effect between temperature, acid concentration, and methanol to sludge mass ratio on the FAME yield for the insitu transesterification of primary sludge, while the FAME yield for secondary sludge was significantly affected by the independent effects of the three factors investigated. The maximum FAME yields were obtained at 75 degrees C, 5% (v/v) H(2)SO(4), and 12:1 methanol to sludge mass ratio and were 14.5% and 2.5% for primary and secondary sludge, respectively. Gas chromatography (GC) analysis of the FAMEs revealed a similar fatty acid composition for both primary and secondary sludge. An economic analysis estimated the cost of $3.23/gallon for a neat biodiesel obtained from this process at an assumed yield of 10% FAMEs/dry weight of sludge.
- Published
- 2007