Search

A cDNA encoding β-mannanase was cloned from Aspergillus niger BCC4525 and expressed in Pichia pastoris KM71. The secreted enzyme hydrolyzed locust bean gum substrate with very high activity (1625 U/mL) and a relatively high k cat /K m (461 mg -1 s -1  mL). The enzyme is thermophilic and thermostable with an optimal temperature of 70 °C and 40% retention of endo-β-1,4-mannanase activity after preincubation at 70 °C. In addition, the enzyme exhibited broad pH stability with an optimal pH of 5.5. The recombinant enzyme hydrolyzes low-cost biomass, including palm kernel meal (PKM) and copra meal, to produce mannooligosaccharides, which is used as prebiotics to promote the growth of beneficial microflora in animals. An in vitro digestibility test simulating the gastrointestinal tract system of broilers suggested that the recombinant β-mannanase could effectively liberate reducing sugars from PKM-containing diet. These characteristics render this enzyme suitable for utilization as a feed additive to improve animal performance.

Short-chain-length medium-chain-length polyhydroxyalkanoate (SCL-MCL PHA) copolymers are promising as bio-plastics with properties ranging from thermoplastics to elastomers. In this study, the hybrid pathway for the biosynthesis of SCL-MCL PHA copolymers was established in recombinant Escherichia coli by co-expression of β-ketothiolase (PhaARe) and NADPH-dependent acetoacetyl-CoA reductase (PhaBRe) from Ralstonia eutropha together with PHA synthases from R. eutropha (PhaCRe), Aeromonas hydrophila (PhaCAh), and Pseudomonas putida (PhaC2Pp) and with (R)-specific enoyl-CoA hydratases from P. putida (PhaJ1Pp and PhaJ4Pp), and A. hydrophila (PhaJAh). When glycerol supplemented with dodecanoate was used as primary carbon source, E. coli harboring various combinations of PhaABCJ produced SCL-MCL PHA copolymers of various monomer compositions varying from C4 to C10. In addition, polymer property analysis suggested that the copolymers produced from this recombinant source have thermal properties (lower glass transition and melting temperatures) superior to polyhydroxybutyrate homopolymer.

Microorganisms residing in the rumens of cattle represent a rich source of lignocellulose-degrading enzymes, since their diet consists of plant-based materials that are high in cellulose and hemicellulose. In this study, a metagenomic library was constructed from buffalo rumen contents using pCC1FOS fosmid vector. Ninety-three clones from the pooled library of approximately 10,000 clones showed degrading activity against AZCL-HE-Cellulose, whereas four other clones showed activity against AZCL-Xylan. Contig analysis of pyrosequencing data derived from the selected strongly positive clones revealed 15 ORFs that were closely related to lignocellulose-degrading enzymes belonging to several glycosyl hydrolase families. Glycosyl hydrolase family 5 (GHF5) was the most abundant glycosyl hydrolase found, and a majority of the GHF5s in our metagenomes were closely related to several ruminal bacteria, especially ones from other buffalo rumen metagenomes. Characterization of BT-01, a selected clone with highest cellulase activity from the primary plate screening assay, revealed a cellulase encoding gene with optimal working conditions at pH 5.5 at 50 °C. Along with its stability over acidic pH, the capability efficiently to hydrolyze cellulose in feed for broiler chickens, as exhibited in an in vitro digestibility test, suggests that BT-01 has potential application as a feed supplement.

Enzymatic modification of pulp is receiving increasing interest for energy reduction at the refining step of the paper-making process. In this study, the production of a multi-fiber modifying enzyme from Mamillisphaeria sp. BCC8893 was optimized in submerged fermentation using a response-surface methodology. Maximal production was obtained in a complex medium comprising wheat bran, soybean, and rice bran supplemented with yeast extract at pH 6.0 and a harvest time of 7 d, resulting in 9.2 IU/mL of carboxymethyl cellulase (CMCase), 14.9 IU/mL of filter paper activity (FPase), and 242.7 IU/mL of xylanase. Treatment of old corrugated container pulp at 0.2-0.3 IU of CMCase/g of pulp led to reductions in refining energy of 8.5-14.8%. The major physical properties were retained, including tensile and compression strength. Proteomic analysis showed that the enzyme was a complex composite of endo-glucanases, cellobiohydrolases, beta-1,4-xylanases, and beta-glucanases belonging to various glycosyl hydrolase families, suggestive of cooperative enzyme action in fiber modification, providing the basis for refining efficiency.

A crude endo-xylanase produced by Aspergillus niger BCC14405 was investigated for its potential in pre-bleaching of chemical pulp from eucalyptus. The optimal fermentation conditions on the basis of optimization using response surface methodology included cultivation in a complex medium comprising wheat bran, rice bran, and soybean meal supplemented with yeast extract, glucose, peptone, and lactose with a starting pH of 6.0 for 7 d. This resulted in production of 89.5 IU/mL of xylanase with minor cellulase activity. Proteomic analysis using LC/MS/MS revealed that the crude enzyme was a composite of hemicellulolytic enzymes, including endo-β-1,4-xylanase and other hemicellulolytic enzymes attacking arabinoxylan and mannan. Pretreatment of the pulp at a xylanase dosage of 10 IU/g increased the brightness ceiling after the C-Eop-H bleaching step up to 3.0% using a chlorine charge with a C-factor of 0.16-0.20. Xylanase treatment also led to reduction in chlorine charge of at least 20%, with an acceptable brightness level. The enzyme pretreatment resulted in a slight increase in pulp viscosity, suggesting an increase in relative cellulose content. The crude enzyme was potent in the enzyme-aided bleaching of chemical pulp in an environmentally friendly pulping process.

In this work, a metagenomic library was generated from peat-swamp forest soil obtained from Narathiwat Province, Thailand. From a fosmid library of approximately 15,000 clones, six independent clones were found to possess lipolytic activity at acidic pH. Analysis of pyrosequencing data revealed six ORFs, which exhibited 34-71% protein similarity to known lipases/esterases. A fosmid clone, designated LP8, which demonstrated the highest level of lipolytic activity under acidic conditions and demonstrated extracellular activity, was subsequently subcloned and sequenced. The full-length lipase/esterase gene, estPS2, was identified. Its deduced amino acid was closely related to a lipolytic enzyme of an uncultured bacterium, and contained the highly conserved motif of a hormone-sensitive family IV lipase. The EstPS2 enzyme exhibited highest activity toward p-nitrophenyl butyrate (C⁴) at 37 °C at pH 5, indicating that it was an esterase with activity and secretion characteristics suitable for commercial development.

A gene encoding a thermostable pullulan-hydrolyzing enzyme was isolated from environmental genomic DNA extracted from soil sediments of Bor Khleung hot spring in Thailand. Sequence comparison with related enzymes suggested that the isolated enzyme, designated Env Npu193A, was most likely a neopullulanase-like enzyme. Env Npu193A was expressed in Pichia pastoris as a monomeric recombinant protein. The purified Env Npu193A exhibited pH stability ranging from 3 to 9. More than 60% of enzyme activity was retained after incubation at 60 degrees C for 1 h. Env Npu193A was found to hydrolyze various substrates, including pullulan, starch, and gamma-cyclodextrin. The optimal working condition for Env Npu193A was at pH 7 at 75 degrees C with K(m) and V(max) toward pullulan of 1.22+/-0.3% and 23.24+/-1.7 U/mg respectively. Env Npu193A exhibited distinct biochemical characteristics as compared with the previously isolated enzyme from the same source. Thus, a culture-independent approach with sequence-basing was found to be an effective way to discover novel enzymes displaying unique substrate specificity and high thermostability from natural bioresources.

An endophytic fungus, Fusicoccum sp. BCC4124, showed strong amylolytic activity when cultivated on multi-enzyme induction enriched medium and agro-industry substrates. alpha-Amylase and alpha-glucosidase activities were highly induced in the presence of maltose and starch. The purified target alpha-amylase, Amy-FC1, showed strong hydrolytic activity on soluble starch (kcat/Km=6.47 x 10(3) min(-1)(ml/mg)) and selective activity on gamma- and beta-cyclodextrins, but not on alpha-cyclodextrin. The enzyme worked optimally at 70 degrees C in a neutral pH range with t(1/2) of 240 min in the presence of Ca(2+) and starch. Maltose, matotriose, and maltotetraose were the major products from starch hydrolysis but prolonged reaction led to the production of glucose, maltose, and maltotriose from starch, cyclodextrins, and maltooligosaccharides (G3-G7). The amylase showed remarkable glucose tolerance up to 1 M, but was more sensitive to inhibition by maltose. The deduced protein primary structure from the putative gene revealed that the enzyme shared moderate homology between alpha-amylases from Aspergilli and Lipomyces sp. This thermotolerant, glucose tolerant maltooligosaccharide-forming alpha-amylase is potent for biotechnological application.