Search

In this study, a novel electrochemical immunosensor for early screening of depression markers-heat shock protein 70 (HSP70) was successfully developed based on the porous graphene (PG) with huge specific surface area and excellent structure. Benefiting from the strong adsorption and good bioactivity of PG which was initially prepared via a simple pyrolysis process, a variety of heat shock protein70 (HSP70) can be firmly loaded on the PG to construct the basic electrode (HSP70/PG/GCE)，which was characterized by the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Due to the HSP70 fixed on the surface of basic electrode and the HSP70 in the samples can competitively combine with the horseradish peroxidase labeled human HSP 70 antibody (HRP-Strept-Biotin-Ab). As a result, it presented a negative correlation between the concentration of HSP70 in samples and the detection signal of the proposed electrochemical immunosensor (HRP-Strept-Biotin-Ab-HSP70/PG/GCE) in the test liquid. The application of PG with excellent electrical conductivity in construction of immunosensor remarkably improved the sensitivity of the immunosensor for detection of HSP70. The proposed immunosensor demonstrated a wide linear range of 0.0448 ~ 100 ng/mL with a low detection limit of 0.02 ng/mL at 3σ. Moreover, the proposed immunosensor could be applied for the sensitive and efficient detection of HSP70 in real samples with good precision, acceptable stability, reproducibility and satisfactory results. Therefore, the HSP70 immunosensor provides a novel and convenient method for early clinical screening of depression markers-heat shock protein 70. [ABSTRACT FROM AUTHOR]

A sensitively competitive electrochemical immunosensor for the detection of cortisol was successfully developed based on gold nanoparticles and magnetic functionalized reduced graphene oxide (AuNPs/MrGO). In order to construct the base of the immunosensor, the MrGO was initially fabricated by chemical cross-linking and used to modify the nafion pretreated glassy carbon electrode. Subsequently, the surface of electrode was modified by AuNPs via electrochemical deposition. A variety of cortisol (Cor) can be firmly loaded in the AuNPs/MrGO with large specific surface area and good bioactivity to construct the basic electrode (Cor/AuNPs/MrGO/Nafion@GCE), which was characterized by the cyclic voltammetry (CV) and electrochemical impedance spectroscopy (EIS), respectively. Due to the cortisol on the surface of basic electrode and samples can competitively combine with the cortisol antibody labelled by horseradish peroxidase (HRP-Strept-Biotin-Ab). Finally, the detection signal of electrochemical immunosensor (HRP-Strept-Biotin-Ab-Cor/AuNPs/MrGO/Nafion@GCE) in the test liquid had negative correlations with the concentration of cortisol in samples. The AuNPs/MrGO with excellent electrical conductivity being applied, the electrochemical response of the immunosensor was immensely amplified. The immunosensor displayed excellent analytical performance for the detection of cortisol range from 0.1 to 1000 ng/mL with a detection limit of 0.05 ng/mL at 3σ. Moreover, compared the developed immunoassay with commercially available enzyme linked immunosorbent assay, the proposed method showed good precision, acceptable stability and reproducibility, indicating the immunosensor could be used for the sensitive, efficient and real-time detection of cortisol in real samples. Therefore, the present strategy provides a novel and convenient method for clinical determination of cortisol. [ABSTRACT FROM AUTHOR]

Leptin is a vital biomarker of non-alcoholic fatty liver (NAFLD), and its evaluation of the concentration level in vivo is of great significance to NAFLD diagnosis. Therefore, it is pressing to develop a method for rapid and sensitive detection of leptin. This paper describes an environmentally friendly and label-free immunosensor based on porous graphene functionalized black phosphorus (PG-BP) composite to detect of leptin. The PG-BP was synthesized via strong coherent coupling between porous graphene (PG) surface plasmons and anisotropic black phosphorus (BP) localized surface plasmons, which made the electrochemical performance of PG and BP synergistic as well as increased the stability and conductive capability of BP material. The PG-BP modified electrodes was further prepared by gold nanoparticles, cysteamine, and glutaraldehyde in turn. Due to the cross-linking effect of glutaraldehyde, anti-leptin can be firmly fixed. These properties of the platform improved the conductive capability of the immunosensor and enhanced the load capacity of the proteins, thereby, the sensitivity of the immunosensor was significantly increased. Under the optimal conditions, the proposed immunosensor exhibited a wide linear range of 0.150–2500 pg/mL with a low detection limit of 0.036 pg/mL. The leptin immunosensor displayed excellent selectivity and anti-interference ability, which could be used for early screening and diagnosis of clinical NALFD. • A BSA/anti-leptin/Glu/Cys/AuNPs/PG-BP/GCE immunosensor was successfully fabricated. • The proposed immunosensor was successfully used for the detection of leptin with a wide range of detection and low detection limits. • The immunosensor can be used for the sensitive, efficient and real-time analysis of leptin in real samples. • The immunosensor is expected to provide a reliable, real-time and convenient method for clinical trials of NAFLD markers. [ABSTRACT FROM AUTHOR]