Search

In this paper, a novel label-free electrochemical impedance aptasensor for highly sensitive detection of IFN-γ based on target-induced exonuclease inhibition was constructed. For this purpose, we designed a DNA hairpin modified on the gold electrode whose loop was the aptamer of the IFN-γ, and the stem was 5′-thiol-modified. In the absence of IFN-γ, Exonuclease III (Exo III) and Exonuclease I (Exo I) digested the double-stranded and single-stranded strands of the hairpin DNA, respectively, causing smaller impedance value on the surface of the electrode. In the presence of IFN-γ, the function of Exo III was greatly inhibited by the binding of the aptamer with the target, and it stopped after cutting three bases of the hairpin DNA. Forming a major target-bound aptamer digestion product, it could not be digested by Exo I, so there was larger impedance on the electrode surface. The calibration curve for IFN-γ was linear in the range of 1 pM–50 nM with the detection limit (LOD) of 0.7 pM. The proposed aptasensor proved good selectivity and reproducibility, and low cost. In addition, the biosensor was able to detect IFN-γ in serum samples successfully, which is expected to provide an efficient method for TB diagnosis at early stages.

Electrochemical detection of specific nucleic acid sequence remains a hot topic in current bioanalytical research. Here, a novel ratiometric electrochemical biosensor based on Exo III-assisted recycling amplification and graphene-modified electrode was fabricated for quantitative detection of trinucleotide repeat sequence d(CAG)n. The double-signals used are the hairpin DNAs labeled with ferrocene and methylene blue respectively as report DNAs, which can hybridize to target DNA. The hybridized DNA was digested by Exo III, resulting in the release of target and report fragments. The graphene-modified electrode can selectively adsorb the released report fragments to generate double electrochemical signals. The signal ratio (F/M) of ferrocene and methylene blue was used to determine the repeat length accurately: a linear relationship was found between F/M and numbers of repeats (n), F/M = 0.061 n + 1.97, with a correlation coefficient of 0.992. Moreover, any electrochemical signal can be used to test repeat concentration with detection limit of 0.22 pM. Therefore, this novel ratiometric electrochemical biosensor provided a reliable and efficient method for the analysis of d(CAG)n trinucleotide repeat and a potential simplified clinical tool for neurodegenerative diseases.

In this paper, a three-line LFB was successfully developed by adding a thrombin line to a conventional two-line LFB for the detection of thrombin in a wide range of human serum. We introduced a thrombin line between the test line and the control line. The concentration of thrombin in the sample was quantitatively related to the signal formation on the three lines of the LFB. We can make use of signal on three lines to quantitative determinate the thrombin by data processing. The detection range of thrombin concentrations measured in 10 min was 1 nM to 100 μM and the LOD was 0.85 nM. Our approach paves way for rapid and sensitive thrombin detection and a superior device for testing in a wide range of physiological concentrations, which also can be used in other hook-effect-limited aptamers or antibodies based sandwich LFBs, and has a high accuracy even within the range of the hook-effect.

A rapid and ultrasensitive molecularly imprinted photoelectrochemical (MIP-PEC) sensing platform based on ITO electrode modified with GO-CdS heterojunction was prepared for ultrasensitive measure of fumonisin B

Up to now, the colloidal gold labeling immunochromatographic test strip is a mature and applicable technology. However, different from the conventional gold nanoparticle, quantum dot (QD) possesses larger specific surface area and better biocompatibility. So, as a novel nanomaterial, QD is capable of assembling more biomolecule which could enhance the sensitivity and accuracy of strips by rationality. Besides, strand displacement amplification was drawn into our test strips in this paper, this assumption made HIV-DNA recycling many times and converting it to plentiful QD-dsDNA (double-stranded deoxyribonucleic acid), where after these nano-structures would be captured by test zone. Meanwhile, the suggested scheme eliminated the hook effect owing to the target drop out of the incorporation on test zone, and any nucleotide sequence or substance which has aptamers can work as the target, such as carcinoembryonic antigen or mycotoxin. This assay realized the detection limit of as low as 0.76 pM (S/N = 3) and the detection range of 1 pM to 10 nM. In the end, we made use of this fluorescent lateral flow assay strips with great reproducibility for detecting HIV-DNA in human serum, that attested this method could be applied to practical application prospectively.

In this work, we have developed an electrochemical aptasensor for high-sensitivity determination of carcinoembryonic antigen (CEA) based on lead ion (Pb2+)-dependent DNAzyme-assisted signal amplification and graphene quantum dot-ionic liquid-nafion (GQDs-IL-NF) composite film. We designed hairpin DNA containing CEA-specific aptamers and DNAzyme chains. In the presence of CEA, hairpin DNA recognized the target and performed a DNAzyme-assisted signal amplification reaction to yield a large number of single-stranded DNA. The GQDs-IL-NF composite film was immobilized on the glassy carbon electrode for the interaction with single-stranded DNA through noncovalent π-π stacking interaction. Therefore, the methylene blue-labeled substrate DNA (MB-substrate) was fixed on the electrode and exhibited an initial electrochemical signal. Under optimal conditions, the response current change was proportional to the concentration of CEA, demonstrating a wide linear range from 0.5 fg mL−1 to 0.5 ng mL−1, with a low detection limit of 0.34 fg mL−1. Furthermore, the proposed aptasensor was successfully applied in determining CEA in serum samples, showing its superior prospects in clinical diagnosis.

A novel molecularly imprinted electrochemiluminescence (MIP-ECL) sensor based on Ru(bpy)

A novel three-dimensional DNA-AuNPs network structure amplification strategy was employed to design a lateral flow biosensor by introducing streptavidin coated gold nanoparticles (Au-SA) in this paper. They act as amplification probes which aggregate numerous gold nanoparticles (AuNPs) on test line by forming a three-dimensional DNA-AuNPs network structure in the presence of target. Sensitive detection of nucleic acid with point-of-care analysis is significant for infectious agent, early diagnosis and treatment of genetic diseases. The use of these particles in rapid ultrasensitive point of care (POC) lateral flow assays lead to a linear range from 0.1pM to 250nM with a limit of detection of 0.01 pM without polymerase chain reaction (PCR). The proposed method could increase the sensitivity by 4 orders of magnitudes than traditional sandwich assays labeled with AuNPs. Furthermore, the assay owns good reproducibility and stability, which will prove practical diagnostic applications.

Herein, we report a convenient approach to purify water-soluble dihydrolipoic acid (DHLA)-capped Ag nanoclusters (Ag NCs) by pH-induced precipitation under acidic conditions. The fluorescence of Ag NCs could be completely recovered by re-dispersing the precipitate into a basic solution using DHLA and NaBH4 as stabilizing ligands and etching reagent. DHLA-Ag NCs-doped agarose hydrogels have been prepared to monitor pH with a wide range from 8.0 to 4.0. When pH decreased, the fluorescence of the hydrogels under a UV lamp decreased and completely disappeared after pH 5. The DHLA-Ag NCs-doped agarose hydrogels biosensor showed low cytotoxicity and long stability. Accordingly, a fluorescent pH sensor for bacterial monitoring has been employed based on the "OFF-ON" signal switch of the Ag NCs-agarose hydrogel.

In the diagnosis of genetic diseases and disorders, nanomaterials-based gene detection systems have significant advantages over conventional diagnostic systems in terms of simplicity, sensitivity, specificity, and portability. In this review, we describe the application of nanomaterials for disease-related genes detection in different methods excluding PCR-related method, such as colorimetry, fluorescence-based methods, electrochemistry, microarray methods, surface-enhanced Raman spectroscopy (SERS), quartz crystal microbalance (QCM) methods, and dynamic light scattering (DLS). The most commonly used nanomaterials are gold, silver, carbon and semiconducting nanoparticles. Various nanomaterials-based gene detection methods are introduced, their respective advantages are discussed, and selected examples are provided to illustrate the properties of these nanomaterials and their emerging applications for the detection of specific nucleic acid sequences.

In this work, a novel electrochemical aptasensor was developed for Hg(2+) detection based on exonuclease-assisted target recycling and hybridization chain reaction (HCR) dual signal amplification strategy. The presence of Hg(2+) induced the T-rich DNA partly folded into duplex-like structure via the Hg(2+) mediated T-Hg(2+)-T base pairs, which triggered the activity of exonuclease III (Exo III). Exo III selectively digested the double-strand DNA containing multiple T-Hg(2+)-T base pairs from its 3'-end, the released Hg(2+) participated analyte recycle. With each digestion cycle, a digestion product named as help DNA was obtained, which acted as a linkage between the capture DNA and auxiliary DNA. The presence of help DNA and two auxiliary DNA collectively facilitated successful HCR process and formed long double-stranded DNA. [Ru(NH3)6](3+) was used as redox indicator, which electrostatically bound to the double strands and produced an electrochemical signal. Exo III-assisted target recycling and HCR dual amplification significantly improved the sensitivity for Hg(2+) with a detection limit of 0.12 pM (S/N=3). Furthermore, the proposed aptasensor had a promising potential for the application of Hg(2+) detection in real aquatic sample analysis.

In this study, we designed a novel molecularly imprinted polymer (MIP), oligomeric methyl silsesquioxane (O-MSSQ)–TiO 2 composite sol, which was made using a sol–gel reaction. This polymer has structural rigidity and high surface area of O-MSSQ, as well as high bio-compatibility and relatively good conductivity of the TiO 2 . Next, a sensitive and selective imprinted electrochemical sensor was successfully constructed for the direct detection of procainamide hydrochloride by molecularly imprinting a film onto the surface of a glassy carbon electrode. Adding TiO 2 resulted in a noticeable enhancement in the sensitivity of the MIP sensor. The performance of the O-MSSQ–TiO 2 film was discussed, and the optimal conditions for detection were determined. The oxidative peak current increased linearly with the concentration of procainamide hydrochloride in the range of 4.00×10 −9 –4.97×10 −5 M using differential pulse voltammetry, and the detection limit was 1.30×10 −9 M with S / N =3. Furthermore, the sensor was applied to determine the procainamide hydrochloride content in a human blood serum sample. The recoveries of the sensors varied from 96.77% to 101.35%, indicating that the prepared sensor might be promising for the determination of procainamide hydrochloride in clinical tests. Moreover, the imprinted electrochemical sensor was used to selectively detect procainamide hydrochloride. The analytical application was conducted successfully and yielded accurate and precise results.

A novel platform based on a hairpin oligonucleotide (HO) switch, gold nanoparticles (AuNPs), and enzyme signal amplification for the ultrasensitive detection of mucin 1 protein (MUC1) was developed in this assay. This HO aptamers and horseradish peroxidase (HRP) were immobilised on the AuNPs to yield HO-AuNP-HRP conjugates. AuNPs were used as labels and bridges between the HO and HRP. HRP was also used as label for catalysing the oxidation of o-phenylenediamine by H2O2. The reaction product was 2,3-diaminophenazine (DAP), which was reduced and could be detected at surface of modified electrode. The reduction signal of DAP was used as a probe for the sensitive detection. After the recognition between oligonucleotide and MUC1, biotin was exposed. Biotin, along with the conjugate, was captured by streptavidin onto the surface of modified electrode. Therefore, the detection of target MUC1 which was a membrane-associated glycoprotein of the mucin family could be sensitively transduced via detection of the electrochemical reduction signal of DAP. Compared to other aptasensors, this biosensor has a good linear correlation ranges from 8.8 nM to 353.3 nM and a lower detection limit of 2.2 nM for MUC1. The proposed method provided a new electrochemical approach for the detection of MUC1.

A sensitive electrochemical procedure based on bovine serum albumin (BSA)/poly-o-phenylenediamine (PoPD)/carbon-coated nickel (C-Ni) nanobiocomposite film modified glassy carbon electrode (BSA/PoPD/C-Ni/GCE) has been developed to explore the electrochemical detection of BSA damage induced by hydroxyl radical. It is the first time that the electrochemical method has been applied for the analysis of Fenton-mediated oxidative damage to proteins. The hydroxyl radical was generated by Fenton reaction (Fe(2+)/H(2)O(2)), which was also validated by ultraviolet-visible (UV-vis) spectroscopy. The decrease in intensity of the PoPD oxidation signals was used as an indicator for the detection of BSA damage. Damage to BSA was also validated by horizontal Attenuation Total Reflection Fourier Transform Infra-red (ATR-FTIR) spectroscopy and the change of protein carbonyl group content achieved by UV-vis spectroscopy. Effects of H(2)O(2) concentration, the ratio of Fe(2+) and H(2)O(2) and incubation time on BSA damage were examined. Protections of BSA from damage by antioxidants were also investigated. These conclusions demonstrated that the proposed electrochemical method is expected to the further application for protein damage studies.

A novel biosensor for detecting glucose had been constructed by the immobilization of glucose oxidase (GOD) on chitosan-boron-doped carbon-coated nickel (BCNi) nanoparticle modified electrode. The GOD-chitosan-BCNi bionanocomposite film was characterized with scanning electron microscope (SEM). The film was propitious to the immobilization of GOD and to the retention of its bioactivity. The direct electrochemistry and electrocatalysis of GOD on modified electrode had been investigated by cyclic voltammogram (CV) and amperometric measurements. The GOD displayed a pair of stable, well-defined and quasi-reversible redox peaks in pH 7.0 phosphate buffer solution (PBS). Furthermore, the biosensor was applied to detect glucose with a broad linear range from 2.50 × 10 −5 to 1.19 × 10 −3 M, the detection limit was brought down to 8.33 × 10 −6 M at a signal to noise ratio of 3 and with an applied potential of −0.2 V. The proposed biosensor showed rapid response (within 3 s), low detection limit, high affinity to glucose and accepted storage stability over one-month period, which demonstrated that the chitosan-BCNi film has potential applications in the immobilization of other third-generation enzyme biosensors.

A novel amperometric biosensor for nitromethane (CH(3)NO(2)) based on immobilization of graphene (GR), chitosan (CS), hemoglobin (Hb) and room temperature ionic liquid (IL) on a glassy carbon electrode (GCE) was developed for the first time. The surface morphologies of a set of representative membranes were characterized by means of scanning electron microscopy (SEM). The electrochemical performance of the biosensor was evaluated by cyclic voltammetry (CV) and chronoamperometry. A pair of stable and well-defined redox peaks of Hb with a formal potential of -0.240 V was observed at the GR-CS/Hb/GR/IL/GCE. The effects of phosphate buffer pH, scan rate, and temperature on the biosensor were investigated to provide optimum analytical performance. Moreover, several electrochemical parameters, e.g., the heterogeneous electron transfer rate constant (k(s)), were calculated in detail. The presence of both GR and IL not only dramatically facilitated the electron transfer of Hb, but also greatly enhanced electrocatalytic activity towards CH(3)NO(2). The apparent Michaelis-Menten constant was down to 0.16 μM, indicating that the biosensor possessed high affinity to CH(3)NO(2). Besides this, the proposed biosensor exhibited fast amperometric response (