Search

It was observed that a biocatalyst prepared from dehydrated whole cells of a recombinant Escherichia coli (initially suspended in borate buffer) was able to hydrolyze gaseous 1-chlorobutane in a solid/gas reactor. Nevertheless, at 40 degrees C and for a 0.7 water activity, it rapidly lost its activity. The explanation of this phenomenon was first investigated by observing the biocatalyst structure at the microscopic level and by studying the localization of the dehalogenase involved in catalysis (intracellular/extracellular). The behavior of this biocatalyst was then compared with that of a preparation made from cells extracts. The reasons of the inactivation are discussed in terms of thermal denaturation and protective effect of buffer salts., ((c) 2009 Wiley Periodicals, Inc.)

Rhodococcus erythropolis NCIMB 13064 and Xanthobacter autotrophicus GJ10 are able to catalyze the conversion of halogenated hydrocarbons to their corresponding alcohols. These strains are attractive biocatalysts for gas phase remediation of polluted gaseous effluents because of their complementary specificity for short or medium and for mono-, di-, or trisubstituted halogenated hydrocarbons (C2-C8 for Rhodococcus erythropolis and C1-C4 for Xanthobacter autotrophicus). After dehydration, these bacteria can catalyze the hydrolytic dehalogenation of 1-chlorobutane in a nonconventional gas phase system under a controlled water thermodynamic activity (a(w)). This process makes it possible to avoid the problems of solubility and bacterial development due to the presence of water in the traditional biofilters. In the aqueous phase, the dehalogenase activity of Rhodococcus erythropolis is less sensitive to thermal denaturation and the apparent Michaelis-Menten constants at 30 degrees C were 0.4 mM and 2.40 micromol min(-1) g(-1) for Km and Vmax, respectively. For Xanthobacter autotrophicus they were 2.8 mM and 0.35 micromol min(-1) g(-1). In the gas phase, the behavior of dehydrated Xanthobacter autotrophicus cells is different from that observed with Rhododcoccus erythropolis cells. The stability of the dehalogenase activity is markedly lower. It is shown that the HCl produced during the reaction is responsible for this low stability. Contrary to Rhodococcus erythropolis cells, disruption of cell walls does not increase the stability of the dehalogenase activity. The activity and stability of lyophilized Xanthobacter autotrophicus GJ10 cells are dependant on various parameters. Optimal dehalogenase activity was determined for water thermodynamic activity (a(w)) of 0.85. A temperature of 30 degrees C offers the best compromise between activity and stability. The pH control before dehydration plays a role in the ionization state of the dehalogenase in the cells. The apparent Michaelis-Menten constants Km and Vmax for the dehydrated Xanthobacter autotrophicus cells were 0.07 (1-chlorobutane thermodynamic activity) and 0.08 micromol min(-1) g(-1) of cells, respectively. A maximal transformation capacity of 1.4 g of 1-chlorobutane per day was finally obtained using 1g of lyophilized Xanthobacter autotrophicus GJ10 cells., (Copyright 2005 Wiley Periodicals, Inc.)

Biofiltration of air polluted by volatile organic compounds is now recognized by the industrial and research communities as an effective and viable alternative to standard environmental technologies. Whereas many studies have focused on solid/liquid/gas biofilters, there have been fewer reports on waste air treatment using other biological processes, especially in a solid/gas biofilter. In this study, a comparison was made of the hydrolysis of halogenated compounds (such as 1-chlorobutane) by lyophilized Rhodococcus erythropolis cells in a novel solid/gas biofilter and in the aqueous phase. We first determined the culture conditions for the production of R. erythropolis cells with a strong dehalogenase activity. Four different media were studied and the amount of 1-chlorobutane was optimized. Next, we report the possibility to use R. erythropolis cells in a solid/gas biofilter in order to transform halogenated compounds in corresponding alcohols. The effect of experimental parameters (total flow into the biofilter, thermodynamic activity of the substrates, temperature, carbon chain length of halogenated substrates) on the activity and stability of lyophilized cells in the gas phase was determined. A critical water thermodynamic activity (a(w)) of 0.4 is necessary for the enzyme to become active and optimal dehalogenase activity for the lyophilized cells is obtained for an a(w) of 0.9. A temperature of reaction of 40 degrees C represents the best compromise between stability and activity. Activation energy of the reaction was determined and found equal to 59.5 KJ/mol. The pH effect on the dehalogenase activity of R. erythropolis cells was also studied in the gas phase and in the aqueous phase. It was observed that pH 9.0 provided the best activity in both systems. We observed that in the aqueous phase R. erythropolis cells were less sensitive to the variation in pH than R. erythropolis cells in the gas phase. Finally, the addition of volatile Lewis base (triethylamine) in the gaseous phase and the action of the lysozyme in order to permeabilize the cells was found to be highly beneficial to the effectiveness of the biofilter., (Copyright 2004 Wiley Periodicals, Inc.)

The gas phase continuous production of acetaldehyde from ethanol and hexanol from hexanal using dried baker's yeast was studied as an alternative approach to conventional processes. The effects of water activity, activity of substrates, and amount of yeast on the performance of the continuous bioreactor were investigated. The extent of yeast hydration and ethanol activity are the most important factors affecting yeast activity and stability., (Copyright 2001 John Wiley & Sons, Inc.)

Fusarium solani cutinase supported onto Chromosorb P was used to catalyze transesterification (alcoholysis) and hydrolysis on short volatile alcohols and esters in a continuous gas/solid bioreactor. In this system, a solid phase composed of a packed enzymatic preparation was continuously percolated with carrier gas which fed substrates and removed reaction products simultaneously. A kinetic study was performed under differential operating conditions in order to get initial reaction rates. The effect of the hydration state of the biocatalyst on the kinetics was studied for 3 conditions of hydration (a(w) = 0.2, a(w) = 0.4 and a(w) = 0.6), the alcoholysis of propionic acid methyl ester with n-propanol, and for 5 hydration levels (from a(w) = 0.2 to a(w) = 0.6) for the hydrolysis of propionic acid methyl, ethyl or propyl esters. F. solani cutinase was found to have an unusual kinetic behavior. A sigmoid relationship between the rate of transesterification and the activity of methyl propionate was observed, suggesting some form of cooperative activation of the enzyme by one of its substrate. For the hydrolysis of short volatile propionic acid alkyl esters, threshold effects on the reaction rate, highly depending on the water activity and the substrate polarity, are reported.

A nuclear magnetic resonance (NMR) method has been developed to monitor on-line lipase-catalyzed esterification reactions without the need to sample the reaction medium. The technique, through (1)H NMR, measures the concentrations of alcohol, ester, hydroxylic hydrogens in the organic phase, and hydroxylic hydrogens in the aqueous phase, if any. Also, the chemical shift evolution of the two types of hydroxylic hydrogens has been followed, providing information on water content of the organic phase and on the appearance of a distinct aqueous phase. As far as (13)C NMR is concerned, it has been possible to measure, first the acid and the ester concentrations in the carbonyl region, and second, the alcohol and the ester concentrations in the methylene region. All (1)H and (13)C results are in agreement with one another. Furthermore, NMR allows for the choice of detection zone. Preliminary studies on the solid phase proved the presence of much more water in the solid phase than in the organic phase, and also gave evidence of the existence of two types of esters, one in the organic phase, mainly associated with the acid, and the other one not associated with the acid, most probably entrapped within the solid enzyme.

Soybean lipoxygenase-1 (EC 1.13.11.12) reaction with linoleic acid as substrate was used to study the biocatalysis in a biphasic system when the reactants have surface-active properties. The poorly water-soluble substrate was initially dissolved in an apolar solvent (octane). The hydroperoxide produced was water soluble and remained in the aqueous phase (borate buffer). The bioreactor was a modified Lewis cell with a well-defined interfacial area between the two phases. Two phenomena were studied separately: the reactant transfer between the two phases and the biocatalyzed reaction in an aqueous medium. This allowed determination of the transfer and the reaction constants. Substrate transfer was found to be affected by the progress of the reaction, because linoleic acid and the hydroperoxy acid have an influence on the interfacial tension. Inactivation of the biocatalyst at the interface was observed in the bioreactor. These results indicate that it is impossible to analyze the system behavior with the method proposed in the literature, which is based on the sequential study of the substrate transfer to the aqueous phase and its biocatalysis by lipoxygenase. The interaction between transfer phenomena and reaction kinetics was studied in the biphasic system. The kinetics were different from those obtained in the aqueous medium. Catalysis and transfer influence each other reciprocally. In this compartmentalized system, cooperativity phenomena were obtained using a nonallosteric enzyme. The evolution of the system was modeled (Runge-Kutta algorithm). The curves obtained were very close to those determined experimentally.

Fusarium solani cutinase and Candida cylindracea lipase were used to catalyze a transesterification reaction in a continuous gas/solid bioreactor. In this system, a solid phase composed of a packed enzymatic preparation was continuously percolated with carrier gas which fed substrate and removed reaction products simultaneously. Different conditions of immobilization were used and compared to the results obtained with a nonsupported enzyme. The enzymatic activity was found to be highly dependent of a key parameter: water activity (a(w)). Biocatalyst stability was greatly influenced by water activity and the choice of immobilization technique for the enzymatic material. For free and adsorbed enzymes, water requirements exhibited optima which corresponded to the complete hydration coverage of the protein. These optima presented a good correlation with the isotherm sorption curves obtained for the different preparations. In this work are reported the results concerning the possibility of using a continuous system able to operate at controlled water activity in a heterogeneous medium. Lipolytic enzyme in such a system appears to be a new process for the biotransformation of volatile esters.

The Trichoderma reesei beta-xylosidase (EC 3.2.1.37) is used to catalyze the production of alkyl beta-D-xyloside. Two general methods of production are tested and compared using the same enzyme: transglycosylation and reverse hydrolysis. Using both methods, primary, secondary, and tertiary alcohols are studied as acceptors. In kinetically controlled process (transglycosylation), the chosen donor is methyl beta-D-xyloside and primary, secondary, and tertiary alkyl alcohols are accepted. In the equilibrium-controlled synthesis, the donor is xylose whereas acceptors are only primary and secondary alcohols. The influence of the donor concentration is investigated in both processes. The yields of the kinetically controlled reactions are higher compared with those of the equilibrium-controlled synthesis. The specificity of the beta linkage is confirmed by proton nuclear magnetic resonance ((1)H NMR) analysis. (c) 1994 John Wiley & Sons, Inc.

Gluco-oligosaccharides were synthesized through the enzymatic condensation of D-glucose at high concentration using a commercial almond beta-glucosidase. The synthesis reactions were carried out with both free and immobilized enzyme, with or without sorbitol, an efficient depressor of water activity (a(w)) in the presence of different glucose concentrations. The yield and the composition of the gluco-oligosaccharides produced changed with the reaction mixture and the form of the enzyme used (free or immobilized). The use of 5 M glucose solution permitted only disaccharides to be obtained, whereas with a glucose concentration of 7.5 M glucose, di-, tri-, and tetrasaccharides were produced. A 7.5 M glucose solution used with 4.4 M sorbitol gave three times more disaccharides than the same solution without sorbitol. Moreover, the immobilized enzyme was much more active in synthesis. The synthesis yield (oligomers mg/mL . mg of enzyme) after immobilization was 573% compared to that of the free enzyme, when a 7.5 M glucose solution was tested. The effects of substrate concentration, sorbitol addition and enzyme immobilization were investigated., ((c) 1993 John Wiley & Sons, Inc.)

Porcine pancreatic lipase and Fusarium solani cutinase were used to catalyze transesterification reactions between methyl propionate, ethyl propionate, and a series of primary alcohols at high temperatures in a continuous packed-bed gas-solid reactor, in which the solid phase is composed of the enzyme and the substrates and products are in a gaseous form. In this type of system, enzyme activity was found to depend essentially on the water activity (A(w)) of the enzyme preparation.