Search

Periodic wet–dry processes are a significant weathering mechanism that can quickly alter a soil’s mechanical characteristics, reducing its resilience and durability. This study investigates the physical and microstructural characterization of stabilized soils through experimental analysis. While the conventional approach to ground improvement involves the application of ordinary Portland cement (OPC) and lime for treating unstable soil, this research explores calcium sulfoaluminate (CSA) cement as an eco-friendly alternative with comparable efficacy and fewer adverse environmental effects. The primary objective is to evaluate the impact of cyclic wet–dry (W–D) events on the durability and stability of CSA cement-treated sand using comprehensive laboratory testing. Various samples were prepared with cement contents of 3%, 5%, 7%, and 10%, corresponding to the optimum moisture content. Stabilized soil specimens underwent testing for unconfined compressive strength (UCS) and ultrasonic pulse velocity (UPV) after curing for 3, 7, 14, and 28 days. Subsequently, these specimens were exposed to zero, one, three, five, and seven W–D cycles. The outcomes show a decrease in the strength and durability index of the soil with a rising number of W–D cycles. However, the decline in the strength and durability of CSA-treated soil samples is significantly mitigated as the CSA content increases from 3% to 10%. The findings indicate that after seven W–D cycles, the UCS value of 10% cemented samples dropped by 14% after 28 days of curing, whereas 3% specimens experienced a 28% loss in strength. Similarly, UCS values for 5% and 7% cement content reduced from 666 kPa to 509 kPa and from 1587 kPa to 1331 kPa, respectively, indicating improved resilience with higher CSA content. The durability index was less affected during the first three cycles, but showed a more pronounced decline after five and seven cycles. For 3% cemented soil, the durability index dropped from 0.95 to 0.71, whereas for 10% cemented soil, it decreased from 0.97 to 0.82 after seven W–D cycles. The scanning electron microscope (SEM) also determines the cement–soil interaction before and after W–D, and it was noted that the pores and cracks increased after each cycle. Based on the findings, it is established that subgrade materials treated with CSA cement demonstrate durability, environmental sustainability, and suitability for integration into road construction projects.

This study analyzes the nonlinear seismic behavior of cluster-connected prefabricated shear walls under varying axial compression ratios. The investigation focuses on the connectivity of shear wall segments assembled using cluster connections rather than separate walls connected by beams. Using the finite element software ABAQUS, this study simulates monotonic horizontal displacement loading to evaluate the yield strength, peak strength, and deformation capacity of the shear walls. The results demonstrate that the horizontal load-bearing capacity of the shear wall significantly improves with an increase in axial compression ratio, while the axial compression ratio also influences ductility. The numerical simulations are validated against experimental data, confirming the accuracy of the model. These findings provide essential insights for optimizing the seismic design of precast shear walls.

The reinforced part at the bottom of high-rise assembled monolithic concrete shear wall structures generally uses cast-in-place concrete due to high elastic–plastic deformation capacity requirements, which limits the advantages of prefabricated shear wall structures. This study investigates the feasibility of using cluster connections to assemble integral shear wall structures at the bottom by modifying the vertical reinforcement of the cluster connection. Numerical simulations using ABAQUS (Version 2019) were validated with laboratory test results. The seismic performance of prefabricated shear walls with cluster connections was examined under varying axial compression ratios. Results indicate that the prefabricated shear wall demonstrates higher bearing and deformation capacity compared to cast-in-place shear walls. The degradation of strength and equivalent stiffness in prefabricated walls is slower, showing better seismic performance under higher axial compression ratios. The cluster connection ensures effective force transmission, maintaining wall integrity. After optimization, the prefabricated shear wall with cluster connection meets the expected seismic performance, providing a basis for its application in reinforced bottom sections.

Civil engineering faces a substantial challenge when dealing with soft and compressible clayey soils. Conventional soil stabilization techniques involving ordinary Portland cement (OPC) result in notable CO2 emissions. This study explores the utilization of basic oxygen furnace (BOF) slag, a by-product of steel production, for strengthening kaolin clay. This research investigates the influence of BOF slag particle size, BOF slag content, and the use of activators such as lime and ground granulated blast-furnace slag (GGBFS) on the stabilization of kaolin clay. The strength development is assessed through unconfined compressive strength (UCS) test, bender element (BE) test, and scanning electron microscopy (SEM). The findings reveal that higher BOF content and extended curing periods enhance soil strength, and lime and GGBFS effectively augment the stabilizing properties of BOF slag. Stabilizing kaolin clay with a 30% BOF/GGBFS mixture in a 50/50 ratio with 1% lime and curing for 7 days yielded a compressive strength of 753 kPa, meeting the Federal Highway Administration’s requirement for lime-treated soil. These combined measures contribute to developing a more robust and stable material with enhanced geotechnical properties.