Search

Large parts of Asia, Europe, and the eastern USA have high population concentrations in moderate seismic regions (MSR), where very large earthquakes are rare. With rampant construction in the cities located in MSRs, a relatively moderate earthquake can turn into a catastrophe. Limiting the collapse has been the conventional performance objective for regions with high seismicity. However, this does not necessarily translate into a more desirable target of life-safety under design basis earthquake in MSRs. The present paper investigates the seismic performance of non-ductile reinforced concrete (RC) buildings that were common before the advent of modern design standards, and are found in very large numbers. An analytical model capturing the shear failure is employed using a drift-based limit state material. The results show that a hybrid index captures moderate damage more accurately than the prevalent drift-based index. The paper further shows that while a generic ground motion suite accurately estimates the median fragility, it fails to capture the uncertainty. A 7-story non-ductile RC archetype building was found to be at a collapse prevention risk of 2 × 10–4. The seismic risk deaggregation reveals that seismic risk consistency can be enhanced by explicit specification of the seismic forces for retrofitting. The study shows that the stringent seismic risk targets can be met by non-ductile buildings in MSR, provided they are designed or retrofitted with constraints on strong column weak beam factors. The study will facilitate in developing a scheme for prioritizing and devising the retrofit of pre-modern code and non-ductile deficient buildings. [ABSTRACT FROM AUTHOR]

The seismic response of monopile foundations is a growing area of research as the offshore wind industry expands worldwide, including in earthquake prone regions of the world. This paper presents dynamic centrifuge tests aimed at investigating the dynamic response of monopiles in both dry and saturated sandy soils. The latter case includes soil liquefaction under strong input motions, with measured excess pore pressures indicating liquefaction. The natural frequency of the monopile-soil system is experimentally determined by measuring the response to a sine sweep motion. Strong earthquakes are then applied at this frequency and its harmonics. This paper discusses the response of the monopile in terms of the peak accelerations observed in the dry and saturated tests, as well as using response spectra and amplification ratios. The dynamic bending moments along the pile are also measured to infer the bending moment profile with depth. Finally, two identical monopiles are pushed-over in each of the centrifuge tests to establish the pre and post-earthquake monotonic response, including the lateral stiffness and capacity, which are compared for the dry model tests and the saturated case. [ABSTRACT FROM AUTHOR]

This paper documents performance of cast-in-place reinforced concrete (RC) buildings in the Durrës municipality during Albania earthquake of November 26, 2019 (MW 6.4). Both mid- and high-rise RC buildings were affected by the earthquake, experiencing structural and/or non-structural damage and even collapse in some cases. The authors performed a reconnaissance study after the earthquake and were involved in seismic assessment of buildings in the affected area. Besides the observations related to physical damage of RC buildings, the paper also presents results of a statistical analysis of damaged RC buildings in the Durrës municipality. The discussion in the paper is focused on damage patterns and failure mechanisms that are relevant for the seismic response of RC structures. Most common damage pattern observed after the earthquakes was related to masonry infill walls, which experienced damage and failure in some cases, and affected the performance of adjacent RC columns due to the infill/frame interaction. Taller RC framed buildings (10 storeys and higher) were expected to have RC shear walls; however, these walls were reportedly absent in the damaged buildings of this type. In some cases, masonry infill walls (instead of RC shear walls) were used in the elevator shaft areas, which resulted in inadequate seismic performance. A case study has been presented to illustrate seismic behaviour of mid-rise and high-rise cast-in-place RC buildings in the November 2019 earthquake, and is based on post-earthquake field observations and a detailed seismic assessment of two earthquake-damaged buildings. Finally, relevant lessons and recommendations are presented in light of the observed performance of RC buildings. [ABSTRACT FROM AUTHOR]

In this paper, the dynamic response of two 21-story buildings was studied to assess the influence of higher modes in their structural performance. While the first building was structured with ductile moment-resisting steel frames and exhibits a global shear-dominated lateral deformation, the second one uses ductile concentrically braced steel frames and has a global bending-type response. Buildings were virtually located in a soft-soil condition of the lake-bed zone in Mexico City. Nonlinear pushover and dynamic analyses were performed through OpenSees on a detailed 3D-model with plasticity spread along the elements. For this purpose, a set of accelerograms recorded during the Mexico Earthquake of September 19, 2017, were selected, and adjusted to represent the actual seismic hazard at the site. A frequency-domain system identification technique was applied to identify the dynamic characteristics of buildings through a moving-window Fourier analysis, that allows for the estimation of the contribution of higher-modes to their overall nonlinear dynamic response. A ratio of the elastic spectral pseudo-accelerations corresponding to the first two vibration modes is proposed to quantitatively anticipate cases and conditions for which the second mode adversely affects the structural performance of upper stories. The discussion includes a comparative study from the lateral global response of the analyzed models. [ABSTRACT FROM AUTHOR]

The response of a two-storey RC school building in the town of Argostoli, Cephalonia Island, Greece, during the seismic sequence of January and February 2014, is examined. The structure was built following an older generation of seismic codes dating from the 1950s, which provide limited strength and ductility against lateral loads. Despite the severity of ground shaking and the two successive events, the building suffered relatively minor damage, like most of the RC buildings in the town. Following a short presentation of some basic seismological, structural and geotechnical aspects of the seismic sequence, the paper focuses on the seismic performance of the structure at hand. To this end, a series of detailed non-linear static and time-history dynamic analyses are reported, which highlight the interplay of soil, foundation and superstructure in modifying the seismic demand. It is demonstrated that SSI had an unexpectedly important (detrimental) role in the behaviour of the structure, increasing its natural period by about 25% and aggravating ductility demand in almost all columns, despite the moderately soft soil conditions (average VS = 180 m/s). The results shed light on the seismic performance of the building and help drawing conclusions on the engineering effects of the 2014 Cephalonia earthquake sequence. [ABSTRACT FROM AUTHOR]

Seismic losses due to earthquakes have been shown to have significant economic, social and environmental consequences. Over recent years, research to predict potential economic and social impact due to seismic risk has been increasing. Recognizing that the traditional philosophy of life safety design can lead to extensive damage and demolition which has a large environmental cost, incorporating environmental impacts associated with the expected seismic damage over a building's life is a key step as the building industry moves towards both sustainable and seismically resilient design. This paper introduces a framework that uses environmental indicators quantifying losses from seismic response that can then be used to advocate for a change in seismic performance objectives. First, existing literature and previously developed approaches for quantifying potential environmental impact due to seismic damage are summarized. Next, performance based earthquake engineering concepts are used to demonstrate a probabilistic approach to quantify potential environmental impacts using a range of environmental and resource use indicators over the life span of a case study building. In addition, a case study is presented to compare different environmental indicators between a Code Minimum building and the same building redesigned for a higher seismic performance. The majority of the composition of the environmental indicator values are from the inclusion of the non-repairable scenario, and from the repair activities, the majority of the impacts are from damage to drift sensitive components including curtains walls, partitions and elevators. For the Code Minimum building the non-repairable scenario contributes to between 8 to 11% the total seismic cost. For the Stronger Stiffer building, the non-repairable scenario contributes around 3% of the initial impact. Neglecting non-repairable scenarios does significantly reduce the potential environmental impacts when analyzing buildings designed for current code minimum structural standards. [ABSTRACT FROM AUTHOR]

Summary: The aim of this paper is to demonstrate the efficiency of a low-cost and sustainable timber-based energy dissipation system with recentering ability, which can be used as a seismic isolation system or a tuned mass damper for the seismic protection of structures in developing or developed countries. The system, defined as Dovetail with SPrings (Dove-SP), utilizes the attractive properties of timber to store CO2, thus reducing the carbon footprint of the existing energy dissipation systems: It comprises two timber slabs that are designed to slide against each other in a motion that is restrained by a dovetail sliding joint. Two sliding interfaces that allow this sliding motion at an attractively low friction coefficient are experimentally investigated: A PVC sand-wich (PVC-s) sliding interface, comprising a thin layer of sand that is sand-wiched between two PVC layers and a timber sand-wich sliding interface consisting of a thin layer of sand encapsulated between two beech timber surfaces. A set of low-cost steel springs is designed and installed on both sides of the dovetail joint to recenter the structure back to its original position after the end of an earthquake ground motion excitation. A novel, low-cost and deformable wood material fabricated from delignified balsa wood is used to reduce the pounding effects before the activation of the steel springs. The seismic behavior and the recentering ability of the novel timber-based energy dissipation system subjected to an ensemble of recorded earthquake ground motion excitations was experimentally investigated through a large-scale shaking table investigation at ETH Zurich. [ABSTRACT FROM AUTHOR]

The track structure has an effect on the dynamic characteristics of the bridge structure, which makes the seismic response of the bridge structure complicated. In this paper, an assessment method is proposed to evaluate the seismic risk of bridge structure, including over-limit risk and over-limit scale. Based on a newly proposed simplified model with high accuracy and high computational efficiency, a total of 3000 calculation conditions are analyzed and the sample stability of response is validated to ensure the reliability of the seismic risk analysis. The seismic risks in the longitudinal direction of the track-bridge model are compared with that of the trackless model, and the influence of the constraint effect of China Railway Track System II ballastless track structure on the seismic risk of the structure is obtained. The influence of the number of spans and PGA on track constraints is also revealed. The analysis results, based on a large number of samples, show that although track constraints can reduce the seismic risk of some phenomenon, such as girders' collision, the expected enhancement of longitudinal seismic safety of the system cannot be guaranteed in general, especially when the number of spans is large. However, it is noted that the track constraint can effectively control the over-limit scale of the system, which can reduce the expected repair cost after an earthquake. Therefore, it can be considered that the positive effect of the track constraints is more significant in economy than in structural safety when the bridge is subjected to a longitudinal earthquake excitation. [ABSTRACT FROM AUTHOR]

In this paper a novel approach named Multi Pier Macro MPM method is proposed for seismic analysis of steel moment frames. Based on the model an arbitrary multi-bay and multi-story moment frame is substituted by a single bay braced frame consists of two piers and two braces at each story. Piers are continuous and braces are pinned to piers. Both piers and braces are 1D truss elements. The axial, flexural and shear stiffness of the moment frame are provided by axial behavior of piers and braces. MPM method was benchmarked against four steel moment frames including two mid-rise and two high-rise buildings. The seismic responses of equivalent braced frames including maximum floor displacements and story drifts was compared with original moment frames responses as exact results, by means of Non-linear Static Procedure NSP and Non-linear Response History Analysis NL-RHA. NL-RHA was performed using twelve ground motion records scaled to Maximum Design Earthquake MDE and Maximum Considered Earthquake MCE hazard intensities. The results proved the simplified braced frame is able to estimate the seismic responses of mid and high-rise moment frame buildings with high accuracy meanwhile the analysis time and computational cost were limited remarkably. [ABSTRACT FROM AUTHOR]

This paper investigates the effects of soil–structure interaction and site amplification on the seismic response of one of the towers of the Theodosian walls of Constantinople during the Kocaeli earthquake in 1999, that largely damaged it. The interacting system is first analysed in the frequency domain by the well-known replacement oscillator model, turning out that the effect of soil–structure interaction could be relevant. The complete system is then examined by the direct approach considering non linearity of the behaviour of both the structure and the soil. The failure mechanism detected from where stress and plasticization concentrate into the masonry panels is consistent with the out-of-plane mechanism of one of the tower façades triggered by the reference earthquake. The focus was then set on the effectiveness of some retrofitting interventions, including the lateral disconnection of the embedded sides of the tower from the surrounding soil, the soil treatment by grouted columns and the classical technique for masonry rehabilitation. Even though the latter choice is the most common one, retrofitting interventions concentrated into the soil could be effective as well. Their use should be properly considered when the scope of the intervention is the preservation of cultural heritage. [ABSTRACT FROM AUTHOR]

The study of the seismic response of long bridges under non-uniform seismic excitation date back to the early 80 s. So far, many methods have been developed to estimate the bridge responses under such excitation. Eurocode-8 is considered the first seismic design code that provided a simplified method for linear seismic analysis of long bridges under non-uniform seismic excitation. In this method, earthquake ground motion at each bridge support is decomposed into uniform and relative excitations. Any desired elastic response quantity of bridge for each input is obtained and results are combined using the SRSS combination rule. In this paper, it is shown that the SRSS method leads to very conservative and unrealistic responses. An alternative combination rule is then recommended for response estimation, and random vibration analysis is used to calculate the correlation coefficient between the two mentioned responses. Efficiency evaluation of the proposed method is investigated by Monte Carlo simulation results of nine long bridges with different geometrical and dynamic characteristics. Two simplified mathematical bridge models for longitudinal and transverse directions are developed. Then, a simple mathematical formula for the correlation coefficient is extracted, and its accuracy and performance are evaluated. Finally, it is concluded that the proposed formula is relatively accurate and appears in acceptable results. [ABSTRACT FROM AUTHOR]

Recent Italian earthquakes have shown the seismic vulnerability of many typical historical masonry churches characterized by one nave and wooden roofs. Under transverse earthquake, the nave transverse response of this kind of churches can be influenced by the geometrical and material features. To increase the seismic performance, strengthening interventions aimed to pursue the global box-behavior by the realization of dissipative roof-structure represent a valid strategy, especially to avoid out-of-plane mechanisms. In this way, the roof structure must be able to represent a tool for the damped rocking of the perimeter walls. Cross-laminated timber (CLT) panels with calibrated metal connections have been recently adopted in experimental tests as a valid solution to obtain a roof-diaphragm with ductile behavior, satisfying the conservative restoration criteria at the same time. In this paper, after a description of the numerical approach for the damped rocking mechanism for one nave configuration church, the effectiveness of different CLT based roof-diaphragms in the nave transverse response is investigated for four historical churches. The seismic responses are performed by comparative dynamic nonlinear analyses and the results are shown in terms of displacements and shear actions transferred to the façade. The influence of the geometrical features of the churches on the nave transversal response is deepened by sensitivity analyses with the aim to predict the displacements and shear variations under the same earthquake excitation. [ABSTRACT FROM AUTHOR]

An investigation on seismic response characteristics and modal parameters of a cable-stayed bridge with movable bearings using vibration records obtained from a seismic monitoring system is presented in this paper. The object of this study is the Tokachi cable-stayed bridge, a single plane prestressed cable-stayed bridge that is equipped with moveable spherical frictional plate (SFP). The bridge seismic responses subjected to various levels of earthquake including the 2003 Tokachi Great earthquake were obtained from a permanent seismic monitoring system. The bridge dynamic characteristics that include frequency and damping were estimated by both the time-invariant and time-variant recursive subspace identification methods. The identification results reveal that damping ratios of the low order modes estimated during the largest earthquake can reach more than 10% of the critical damping, which is higher than what usually assumed in the seismic design code. Supplementary damping caused by friction force at the movable SFP bearings was identified as the main source of the large damping, and it was quantified by a modal-based inverse analysis using the sparse regularization method. Results of the analyses confirm the influence of moveable SFP bearings performance with its Coulomb-friction type stick–slip behavior on the dynamic characteristics of the bridge. The bearings remain stuck at smaller excitation causing higher stiffness of the structure and slip during a larger excitation resulting in stiffness reduction. The sliding process induces friction force between contacting surfaces of the SFP bearings which results in the increase of damping as the excitation level increases. The damping, however, does not increase continuously, but becomes steadier after a certain level of excitation. [ABSTRACT FROM AUTHOR]

The method employed in this study combines large-scale shaking table tests with fully coupled 3D non-linear dynamic analysis to investigate the site response and structural damage mechanisms of laterally spreading site cluster pile foundation systems under weak and strong seismic excitation. The study also aims to verify the applicability of the high-efficiency and universal parallel calculation system method, which involves SolidWorks, HyperMesh, OpenSeesMP, and GiD, with a fully visualized interface operation in geotechnical engineering, based on the test database. The results show that under weak seismic excitation, the acceleration and displacement in the free field and near-pile region are linearly distributed along the burial depth, and the motion of shallow pile foundation is mainly controlled by the inertial effect of the superstructure; while under strong seismic excitation, the displacement in the near-field region is much smaller than the free field showing significant pile pinning effect, and the displacement and acceleration in the near-pile domain are cosine-shaped distributed along the burial depth, with the lateral spreading of site liquefaction intensifying. At the intersection of clay and sand layers, a weak interlayer is present, which affects the structural response. The kinematic effect of the site dominates the response, and the location of vulnerability gradually shifts from the pile bottom to the pile head. [ABSTRACT FROM AUTHOR]

The 2010–2011 Canterbury Earthquake Sequence caused extensive damage to over 6000 residential buildings in Christchurch and highlighted an urgent need to improve the resilience of the housing sector. As a result, the authors have developed the eco-rubber geotechnical seismic isolation (ERGSI) foundation system for new low-rise buildings. It is a cost-effective and sustainable technology that integrates a horizontal geotechnical seismic isolation (GSI) layer—i.e. a deformable seismic energy dissipative filter made of gravel–rubber mixtures (GRMs)—and a flexible rubberised concrete (RuC) raft footing. The present study aims at evaluating the performance of an ideal ERGSI system in dissipating seismic energy and assessing the seismic response of two-storey RC framed structures placed on the ERGSI system. Firstly, results of laboratory investigations are presented and ideal GRM and RuC for use in ERGSI systems are identified. Hence, OpenSees finite-element numerical investigations and spectral acceleration analyses are undertaken for a 900 mm-thick GRM layer with 40% rubber content by volume. Further, time-history dynamic analyses—carried out by SeismoStruct software—are presented and discussed for two ERGSI-isolated RC framed structures having natural period of 0.3 s and 0.5 s. The results obtained for the ERGSI-isolated structures are finally compared with those obtained for two non-isolated framed structures placed on a traditional foundation (i.e. RC footing placed on a compacted gravel layer). This study demonstrates that the seismic demand (i.e. peak acceleration measured at the structure top-floor, lateral deformation at each floor and base shear) on low-rise buildings can be significantly reduced by using ERSGI foundation systems. [ABSTRACT FROM AUTHOR]

Regional earthquake early warning (EEW) alerts and related risk-mitigation actions are often triggered when the expected value of a ground-motion intensity measure (IM), computed from real-time magnitude and source location estimates, exceeds a predefined critical IM threshold. However, the shaking experienced in mid- to high-rise buildings may be significantly different from that on the ground, which could lead to sub-optimal decision-making (i.e., increased occurrences of false and missed EEW alarms) with the aforementioned strategy. This study facilitates an important advancement in EEW decision-support, by developing empirical models that directly relate earthquake source parameters to resulting approximate responses in multistory buildings. The proposed models can leverage real-time earthquake information provided by a regional EEW system, to provide rapid predictions of structure-specific engineering demand parameters that can be used to more accurately determine whether or not an alert is triggered. We use a simplified continuum building model consisting of a flexural/shear beam combination and vary its parameters to capture a wide range of deformation modes in different building types. We analyse the approximate responses for the building model variations, using Italian accelerometric data and corresponding source parameter information from 54 earthquakes. The resulting empirical prediction equations are incorporated in a real-time Bayesian framework that can be used for building-specific EEW applications, such as (1) early warning of floor-shaking sensed by occupants; and (2) elevator control. Finally, we demonstrate the improvement in EEW alert accuracy that can be achieved using the proposed models. [ABSTRACT FROM AUTHOR]