Search

Ordinary (customary) light gauge steel framing is a convenient construction technology; however, given the studs low axial capacity, it has been considered mainly for low-rise buildings in low seismicity regions. This paper investigates the boundaries of application of this type of steel framing (in moderate and high seismicity areas) by designing the structures of three representative 5, 7 and 10-storey buildings in order to examine their feasibility. The necessity of using built-up columns consisting of two or more sections is investigated. The axial capacity of studs is estimated by code-type analyses. The critical buckling stress is determined with well-known closed-form expressions; as they do not contemplate the flexibility of the screwed connections (in built-up sections), the obtained results are complemented with those of the finite strip method and generalized beam theory formulations. [ABSTRACT FROM AUTHOR]

Precast reinforced concrete panels are commonly used as wall claddings in precast buildings. The cladding panels are generally evaluated as non-structural members and are joined to structural systems via mechanical, welding, and bolted dry connections. Several failures were observed in the last seismic events in Southern Europe, which demonstrate the deficiencies of the cladding connections in terms of strength and ductility. A comprehensive research activity named SAFECLADDING was conducted in Europe to provide knowledge for proper seismic design of precast structures with cladding panels. In this context, energy dissipative steel cushions were developed and evaluated through the extensive experimental and numerical studies. Steel cushions can provide robust interaction of the structural system with the cladding panels. This paper numerically evaluates the effects of cladding panels with steel cushions on the global seismic behaviour of the buildings. An existing representative industrial building is selected to perform intensive nonlinear dynamic analyses. Analyses performed on the bare and hybrid systems showed that the hybrid system has high performance in terms of story drifts, internal forces, and deformations with respect to the bare system. The overall drifts in longitudinal and transversal directions of the building are reduced by about 78 and 54%, respectively. Average residual drifts of cladding panels and steel cushions indicated that the applied steel cushion placement scheme has a promising re-centring capability during seismic action. [ABSTRACT FROM AUTHOR]