Search

This study attempts to propose dynamic centrifuge model tests as a method of seismic risk assessment in order to discover how stone architectural heritages with masonry structures have endured seismic load, and whether there is any possibility of future earthquake damage. Dynamic centrifuge tests have been conducted for one fifteenth scale models of Seok-ga-tap and the five-storey stone pagoda of Jeongnimsa temple site, which are Korean representative stone pagodas. In order to make input motions of the earthquake simulator, site investigation and site-specific response analysis have been performed. The models of two stone pagodas, which have the same number of pieces with the real structures, have been produced and the dynamic centrifuge tests have been conducted for the model pagodas. Accelerometers were attached at different heights of the pagoda. The measured acceleration records and frequency responses were analysed during dynamic centrifuge test. Two real earthquake records, Hachinohe and Ofunato earthquakes and a sweeping signal with ranged frequency were utilised for input motions of dynamic centrifuge tests to evaluate the behaviour of the stone pagodas. For Seok-ga-tap models, it was observed that acceleration tends to be amplified with height. The third floor body shows at most 2.5 amplification of acceleration in comparison to the surface ground. The amplification was at a frequency of 3.83 Hz and it was considered as the natural frequency of the pagoda. For the five-storey stone pagoda, the seismic wave energy significantly reduced while it passed the first body floor, and then the peak acceleration was gradually amplified upwards. It was found that the pagodas did not collapse when the peak acceleration of ground surface was raised to 0.4 g. Given that the maximum design seismic acceleration specified in Korean seismic design guide is 0.22 g and the amplification ratio of peak acceleration in the supporting ground of the pagodas ranges from 1.45 to 1.74, it can be shown that the two pagodas are stable against 2400-year return period earthquake level, and have excellent seismic performance. [ABSTRACT FROM AUTHOR]

Nepal is located in a highly active tectonic region of the Himalayan belt, one of the most severe earthquake prone areas of the world. Nepal is lying between the Indian and the Eurasian plate, which are moving continuously, resulting in frequent devastating earthquakes. Moreover, different authors state that the accumulated slip deficit (central seismic gap) is likely to produce large earthquakes in the future. Cultural heritage buildings and monuments are, therefore, at risk, and the eventual cultural loss in the consequence of an earthquake is incalculable. Post-seismic surveys of past earthquakes have shown the potential damage that unreinforced masonry structures, particularly Pagoda temples, may suffer in future earthquakes. Most of the Nepalese Pagoda temples, erected during XIV century, are considered non-engineered constructions that follow very simple rules and construction detailing in respect to seismic resistance requirements and, in some cases, without any concern for seismic action. Presently, conservation and restoration of Nepalese temples is one of the major concerns, since they are considered world heritage with universal value. The present paper is devoted to outline particular building characteristics of the UNESCO classified Nepalese Pagoda temples and the common structural fragilities, which may affect their seismic performance. Moreover, based on a parametric sensitivity analysis, structural weaknesses and fragilities of Pagoda temples were identified associated to the local and traditional construction techniques, detailing and common damages. [ABSTRACT FROM AUTHOR]