Search

We synthesized an amorphous Ti-based hydroperoxo complex (ATPC) using a facile method involvingonly titanium hydride (TiH2) and H2O2 under mild conditions. We chose TiH2 as the precursor because it has more reactive sites than metal oxides such as TiO2. Qualitative and quantitative optical measurements showed that our synthesized ATPC photocatalysts contained many hydroperoxo groups and various oxidation states of Ti (Ti2+, Ti3+, and Ti4+). Thus, the synthesized ATPC exhibits excellent photocatalytic properties with very fast rates of organic decolorization compared to other conventional visiblelight catalysts. The presence of many hydroperoxo complexes increases the formation of active radicals, which can degrade VOCs such as acetaldehyde in a gas phase. To test the application of the synthesized ATPC, we fabricated a filter system in an air purifier using ATPC coating layers and successfully removed the VOCs. We also proposed a possible photocatalytic oxidation mechanism with ATPC based on this study. It is important to conduct application tests as well as commercialization in photocatalytic experiments. [ABSTRACT FROM AUTHOR]

For environmental applications, such as water and air purification utilizing photocatalysts, we synthesized patterned titanium dioxide (TiO2) thin films using polystyrene (PS) spheres. This was primarily done to enhance the surface area and photocatalytic activities. TiO2 thin films were deposited on silicon wafers attached to variously sized PS spheres via the spin coating method and were annealed at 600 °C. The processing step involved patterning and coating a TiO2 sol–gel. The photocatalytic performance was analyzed using an UV–visible spectrophotometer. Within 20 min, a high catalytic efficiency (98% removal) with a 20-time faster decomposition rate of the malachite green (MG) solution than that of the nonpatterned TiO2 was obtained from the patterned TiO2 with 400 nm sized PS due to the large surface area. In addition, the phenol in the water removed as much as 50% within 2 h with the same photocatalyst, which was expected to be one of the strong candidates to be applied to the next generation of photocatalysts for water purification. [ABSTRACT FROM AUTHOR]

Activated carbon (AC) was synthesized with various weight ratios of manganese dioxide (MO) through a simple hydrothermal approach. The electrochemical performance of the synthesized activated carbon/MnO2 composites was investigated. The effect of the activated carbon/MnO2 (AM) ratio on the electrochemical properties of the activated carbon/MnO2 composites and the pore structure was also examined. The results show that the specific capacitance of the activated carbon material has been improved after the addition of MO. The as-synthesized composite material exhibits specific capacitance of 60.3 F g−1 at 1 A g−1, as well as stable cycle performance and 99.6% capacitance retention over 5000 cycles. [ABSTRACT FROM AUTHOR]

Photocatalytic H2 generation via water splitting is increasingly gaining attention as a viable alternative for improving the performance of H2 production for solar energy conversion. Many methods were developed to enhance photocatalyst efficiency, primarily by modifying its morphology, crystallization, and electrical properties. Here, we summarize recent achievements in the synthesis and application of various photocatalysts. The rational design of novel photocatalysts was achieved using various strategies, and the applications of novel materials for H2 production are displayed herein. Meanwhile, the challenges and prospects for the future development of H2-producing photocatalysts are also summarized. [ABSTRACT FROM AUTHOR]