Search

In this study, novel Zn catalysts were prepared by the wet impregnation method using printing and dyeing wastewater (PDW)-modified petroleum coke (petcoke) as a carrier, and they were applied to the acetylene acetoxylation. The pretreated petroleum coke has a high specific surface area which provides sufficient space for the loading of Zn. Calcination further increases catalyst activity, but when calcination temperatures exceed 1000 °C, a significant loss of Zn occurs, resulting in a dramatic decrease in catalyst activity. This enables the conversion of acetic acid up to 85%. X-ray photoelectron spectroscopy confirmed that a large amount of N is introduced into PC from PDW, which changes the electron transfer around Zn. Temperature-programmed desorption (TPD) analysis revealed that the nitrogen-doped Zn(OAc)2 catalyst enhanced the catalytic activity by modulating the intensity of the catalyzed adsorption of acetic acid and acetylene. This study provides a new way to reuse petroleum coke and printing and dyeing wastewater to support the sustainable development of the vinyl acetate industry. [ABSTRACT FROM AUTHOR]

The preparation method and calcination temperature of metal-organic framework (MOFs)-derived materials are critical factors affecting catalytic performance. In this work, the preparation conditions of MOFS precursors were optimized, and zinc-based catalysts with different activities (MOF5-700, MOF5-750, and MOF5-800) were obtained by pyrolysis of MOFS precursors under nitrogen, which were then applied to an acetylene acetoxylation reaction system. According to the results, the conversion rate of acetic acid under catalysis was significantly different. (MOF5-700 (48%), MOF5-750 (62%), and MOF5-800 (22%)). Comparing the activity of the catalyst with the industrial catalyst Zn(OAc)2/AC (20%), MOF5-750 showed higher activity, and the acetic acid conversion rate remained around 60% after 50 h of stability testing. By characterization analysis, MOFs-derived materials were obtained after proper temperature pyrolysis. They have high mesoporous content, defects, and oxygen-containing functional groups and can maintain a good crystal structure, greatly reducing the loss of active components. This is the main reason for the good performance of the MOF5-750 catalyst in acetylene acetoxylation. Thus, the preparation conditions and favorable pyrolysis temperature of MOF derivative catalysts play a key role in the catalytic performance of acetylene acetoxylation. [ABSTRACT FROM AUTHOR]

Zinc acetate (Zn(OAc)2) loaded on activated carbon (AC) is the most commonly used catalyst for the industrial synthesis of vinyl acetate (VAc) using the acetylene method. The aim of this study is to optimize the Zn(OAc)2/AC catalyst by adding co-catalysts to improve its activity and stability. Ternary catalysts were synthesized by adding Co and Ni to the Zn(OAc)2/AC catalyst (Zn-Co-Ni/AC). Due to the strong synergistic effect among promoter Co, Ni, and the active component of Zn(OAc)2, the resulting catalyst is capable to absorb more acetic acid and less acetylene. The stability and activity of Zn-Co-Ni/AC catalyst have been improved through electron transfer to alter the electron cloud density around the Zn element. Under the same reaction conditions, the activity of Zn-Co-Ni/AC catalyst was enhanced by 83% compared to that of Zn(OAc)2/AC, and the activity was still as high as 30.1% after 120 h of testing. [ABSTRACT FROM AUTHOR]