Search

Two series of hybrid inorganic–organic materials, prepared via interlayer organic modification of protonated Ruddlesden–Popper phases HLnTiO4 (Ln = La, Nd) with n-alkylamines and n-alkoxy groups of various lengths, have been systematically studied with respect to photocatalytic hydrogen evolution from aqueous methanol under near-ultraviolet irradiation for the first time. Photocatalytic measurements were organized in such a way as to control a wide range of parameters, including the hydrogen generation rate, quantum efficiency of the reaction, potential dark activity of the sample, its actual volume concentration in the suspension, pH of the medium and stability of the photocatalytic material under the operating conditions. The insertion of the organic modifiers into the interlayer space of the titanates allowed obtaining new, more efficient photocatalytic materials, being up to 68 and 29 times superior in the activity in comparison with the initial unmodified compounds HLnTiO4 and a reference photocatalyst TiO2 P25 Degussa, respectively. The hydrogen evolution rate over the samples correlates with the extent of their interlayer hydration, as in the case of the inorganic–organic derivatives of other layered perovskites reported earlier. However, the HLnTiO4-based samples demonstrate increased stability with regard to the photodegradation of the interlayer organic components as compared with related H2Ln2Ti3O10-based hybrid materials. [ABSTRACT FROM AUTHOR]

Photocatalytic activity of HB2Nb3O10 perovskite nanosheets (B = Ca, Sr) has been systematically investigated in the reactions of hydrogen production, depending on the method of the photocatalyst preparation: using the pristine nanosheets in the parent suspension without reassembly, filtered nanosheets as well as nanosheets restacked by hydrochloric acid. Photocatalytic measurements were organized in such a way as to control a wide range of parameters, including the hydrogen generation rate, quantum efficiency of the reaction, potential dark activity of the sample as well as stability and pH of the reaction suspension. Exfoliation of the niobates into nanosheets allowed obtaining efficient photocatalysts surpassing the initial bulk materials in the activity up to 55 times and providing apparent quantum efficiency up to 20.8% after surface decoration with a Pt cocatalyst. Among the reassembled samples, greater hydrogen evolution activity was exhibited by simply filtered nanosheets that, unlike the HCl-restacked ones, were found to possess much lower specific surface area in a dry state but contain a perceptible amount of tetrabutylammonium cations on the surface. The activity difference, potentially, is associated with the fact that the filtered nanosheets undergo ultrasonic disaggregation before photocatalytic tests much easier than their HCl-restacked counterparts and, thanks to this, have greater active surface in the reaction suspension. In addition, the enhanced activity of the filtered nanosheets may be due to the presence of tetrabutylammonium as an organic modifier on their surface, which is consistent with the high photocatalytic performance of organically modified layered perovskites considered in our previous reports. [ABSTRACT FROM AUTHOR]

The stability of platinized n-butylamine-intercalated layered titanate H2La2Ti3O10 during the process of photocatalytic hydrogen production from aqueous methanol under UV irradiation has been thoroughly investigated by means of XRD, CHN, TG, 13C NMR, BET, SEM and GC-MS analysis. It was revealed that n-butylamine completely abandons the interlayer space and transforms into n-butyraldehyde within 3 h of the reaction, while the particle morphology and specific surface area of the photocatalyst are preserved. The resulting solid phase contains carbon in at least two different oxidation states, which are attributed to the intermediate products of methanol oxidation bound to the perovskite matrix. The activity of the photocatalyst formed in this way is stable in time and strongly depends on the medium pH, which is not typical of either the parent H2La2Ti3O10 or TiO2. An approximate linear equation φ ≈ 29−2∙pH holds for the apparent quantum efficiency of hydrogen production in the 220–340 nm range at 1 mol. % methanol concentration. In the acidic medium, the photocatalyst under study outperforms the platinized H2La2Ti3O10 by more than one order of magnitude. The variation in methanol concentration allowed a maximum quantum efficiency of hydrogen production of 44% at 10 mol. % to be reached. [ABSTRACT FROM AUTHOR]

Two series of hybrid inorganic-organic derivatives, obtained via the modification of protonated Ruddlesden–Popper phases H2Ln2Ti3O10 (Ln = La, Nd) with intercalated n-alkylamines and grafted n-alkoxy groups, have been systematically investigated in relation to photocatalytic hydrogen production from a model of 1 mol % aqueous solution of methanol for the first time. Photocatalytic measurements were performed both for bare samples and for their composites with Pt nanoparticles as a cocatalyst using an advanced scheme, including dark stages, monitoring of the volume concentration of the sample in the reaction suspension during the experiment, shifts of its pH and possible exfoliation of layered compounds into nanolayers. It was found that the incorporation of organic components into the interlayer space of the titanates increases their photocatalytic activity up to 117 times compared with that of the initial compounds. Additional platinization of the hybrid samples' surface allowed for achieving apparent quantum efficiency of hydrogen evolution of more than 40%. It was established that the photocatalytic activity of the hybrid samples correlates with the hydration degree of their interlayer space, which is considered a separate reaction zone in photocatalysis, and that hydrogen indeed generates from the aqueous methanol solution rather than from organic components of the derivatives. [ABSTRACT FROM AUTHOR]

The paper is focused on the Fe for Co substitution effect on the redox and catalytic properties in the perovskite structure of GdFeO3. The solid oxides with the composition GdFe1−xCoxO3 (x = 0; 0.2; 0.5; 0.8; 1) were obtained by the sol-gel method and characterized by various methods: X-ray diffraction (XRD), temperature-programmed reduction (H2-TPR), N2 sorption, temperature-programmed desorption of oxygen (TPD-O2), simultaneous thermal analysis (STA), and X-ray photoelectron spectroscopy (XPS). The H2-TPR results showed that an increase in the cobalt content in the GdFe1−xCoxO3 (x = 0; 0.2; 0.5; 0.8; 1) leads to a decrease in the reduction temperature. Using the TPD-O2 and STA methods, the lattice oxygen mobility is increasing in the course of the substitution of Fe for Co. Thus, the Fe substitution in the perovskite leads to an improvement in the oxygen reaction ability. Experiments on the soot oxidation reveal that catalytic oxidation ability increases in the series: GdFe0.5Co0.5O3 ˂ GdFe0.2Co0.8O3 ˂ GdCoO3, which is in good correlation with the increasing oxygen mobility according to H2-TPR, TPD-O2, and STA results. The soot oxidation over GdFeO3 and GdFe0.8Co0.2O3 is not in this range due to the impurities of iron oxides and higher specific surface area. [ABSTRACT FROM AUTHOR]

A series of hybrid inorganic–organic niobates HCa2Nb3O10×ROH, containing n-alkoxy groups of primary alcohols (R = Me, Et, Pr, Bu, Hx, and Dc) grafted in the interlayer space, has been studied for the first time in relation to photocatalytic hydrogen generation from a model 1 mol % aqueous solution of methanol under ultraviolet irradiation. Photocatalytic activity was measured both for bare samples and for their composites with Pt nanoparticles as a cocatalyst. The advanced measurement scheme allowed monitoring the volume concentration of a sample in a suspension during the experiment, its pH, and possible exfoliation of layered compounds into nanolayers. In the series of n-alkoxy derivatives, the maximum rate of hydrogen evolution was achieved over a Pt-loaded ethoxy derivative HCa2Nb3O10×EtOH/Pt. Its apparent quantum efficiency of 20.6% in the 220–350 nm range was found not to be caused by changes in the light absorption region or specific surface area upon ethanol grafting. Moreover, the amounts of hydrogen released during the measurements significantly exceeded those of interlayer organic components, indicating that hydrogen is generated from the reaction solution rather than from the hybrid material. [ABSTRACT FROM AUTHOR]