Search

Cobia, Rachycentron canadum, is a medium-size marine fish with emerging global potential for offshore aquaculture. The processing waste, cobia liver, is a raw material rich in polyunsaturated fatty acid oils. In this study, an environmentally friendly green process, aqueous extraction (AE), was used to extract the cobia liver oil. The effect of cooking time and substrate water ratio on the oil extractability was investigated herein. The cooking time of 15 min, and substrate water ratio of 1:2 obtained the highest extraction efficiency. However, the oil extractability was only 18.8%. Thus, enzyme-assisted aqueous extraction (EAAE) was used to increase oil extractability and recovery of protein hydrolysates. The commercial proteases—including alcalase, papain, trypsin, and pepsin—were employed in pretreated cobia liver in order to increase oil release during AE. The EAAE results showed that maximum oil extractability was 38% by papain pretreatment. EAAE greatly improved the extraction efficiency; the oil extractability was double than that of AE (18.8%). The fatty acid profiles revealed that ω-3 polyunsaturated fatty acid contents of extracted oil obtained from AE and EAAE were 21.3% and 19.5%, respectively. Besides, the cobia liver hydrolysates obtained from EAAE by alcalase, papain, pepsin, and trypsin pretreatment showed scavenge DPPH radical activity with EC50 values of 0.92, 1.03, 0.83, and 0.53 mg, respectively. After in vitro simulated gastrointestinal digestion, the protein hydrolysates exhibited scavenge DPPH radical activity with EC50 values of 1.15, 1.55, 0.98, and 0.76 mg for alcalase, papain, pepsin, and trypsin, respectively. The study showed that the EAAE process can be used for extracting fish oil from fish waste while simultaneously obtaining the protein hydrolysates with antioxidant activity. [ABSTRACT FROM AUTHOR]

Titanium dioxide (TiO2) thin films are used for a broad range of applications such as wastewater treatment, photocatalytic degradation activity, water splitting, antibacterial and also in biomedical applications. There is a wide range of synthesis techniques for the deposition of TiO2 thin films, such as chemical vapor deposition (CVD) and physical vapor deposition (PVD), both of which are well known deposition methods. Layer by layer deposition with good homogeneity, even thickness and good adhesive nature is possible by using the PVD technique, with the products being used for photocatalytic applications. This review studies the effects of magnetron sputtering conditions on TiO2 films. This innovative technique can enhance the photocatalytic activity by increasing the thickness of the film higher than any other methods. The main purpose of this article is to review the effects of DC and RF magnetron sputtering conditions on the preparation of TiO2 thin films for photocatalysis. The characteristics of TiO2 films (i.e., structure, composition, and crystallinity) are affected significantly by the substrate type, the sputtering power, the distance between substrate and target, working pressure, argon/oxygen ratio, deposition time, substrate temperature, dopant types, and finally the annealing treatment. The photocatalytic activity and optical properties, including the degree of crystallinity, band gap (Eg), refractive index (n), transmittance (T), and extinction coefficient (k), of TiO2 films are dependent on the above- mentioned film characteristics. Optimal TiO2 films should have a small particle size, a strong degree of crystallinity, a low band gap, a low contact angle, a high refractive index, transmittance, and extinction coefficient. Finally, metallic and nonmetallic dopants can be added to enhance the photocatalytic activity of TiO2 films by narrowing the band gap. [ABSTRACT FROM AUTHOR]