Search

The utilization of waste paper is very important for saving wood resources and reducing waste generation. Various techniques for preparing cellulose nanofibers, which is a material recently proposed for potential applications in the paper industry, have been investigated. In the present study, fine fibers were prepared using recycled pulp and a nanoengineering aqueous counter collision treatment, and sheets composed of these fine fibers were prepared by filtration under reduced pressure conditions. Measurement of specific surface area and optical microscopic observation of fine fibers showed the recycled pulp was not readily miniaturized by the treatment compared with virgin pulp. The tensile strength of sheets produced from recycled pulp by 5 times of the treatment was higher than of those prepared from recycled pulp by 60 times and from virgin pulp regardless of the number of the treatment. Furthermore, the density of the sheet produced from recycled pulp by 5 times was lower than other sheets. [ABSTRACT FROM AUTHOR]

The mechanical, physical, and chemical properties of recycled pulps were evaluated after a series of treatments designed to improve and/or modify the pulp characteristics. Tensile strength, bursting strength, and apparent density of the pulps decreased with recycling. However, the tear strength, in most cases, increased after the first recycle and then decreased after the second recycle. Carboxyl content and WRV of pulps also decreased with recycling. Chemical treatments did not increase the bonding ability of recycled pulps and, in most cases, decreased the physical properties of the pulps. Altering the physical state of the cellulose microstructure through additional swelling did not appear to be a significant factor for strength restoration. It may be that the hemicelluloses plan a greater role in recycling than originally thought. [ABSTRACT FROM AUTHOR]

Surface properties of bleached kraft pulps were evaluated before and after recycling, and after a series of chemical treatments designed to improve and/or modify the pulp characteristics. The surface free energy characteristics of the pulps were determined using the Wilhelmy technique, and ESCA and ATR-FTIR methods were used to evaluate the chemical composition of the surfaces of the pulp fibers. In general rather small changes were noted at the fiber surfaces with recycling and chemical treatment. Recycling tended to increase the acid component and decrease the base component of the surface free energy of the pulps. This could result from exposure of carboxyl groups from hemicelluloses and/or from oxidized layers from the bleaching process. ESCA analyses also indicated increased carboxyl concentration at the surfaces of the recycled fibers. Although treatment with aqueous bases and organic solvents tended to increase the hydroxyl content on the surface of recycled pulps, the chemical treatments were not beneficial to pulp quality. AFM and SEM of fiber and fine surfaces of kraft pulps revealed that the fines fraction was altered to a much greater extent with recycling. Although recycled fibers appeared to have improved wettability, these small changes in the surface characteristics do not appear to play the dominant role in the characteristics of recycled pulps. Recycling did not change the crystallinity of whole pulps, but it increased the crystallinity of the fines fraction. The increase in the crystallinity of the fines fraction and the reduction in the water retention value (WRV) and the bulk carboxyl content (xylan) of the recycled pulps, as noted in Part I of this paper, appear to play the predominant role in determining the characteristics of recycled pulps. It appears that the loss of the hemicelluloses in the bulk of the fiber with recycling is much more important for internal fibrillation than the apparent small increase of hemicelluloses at the surface of recycled fibers. [ABSTRACT FROM AUTHOR]