90 results on '"Lara-Curzio, Edgar"'
Search Results
2. Low Cost Synthesis of Alumina Reinforced Fe-Cr-Ni-Alloys.
3. Enhancement of YSZ Electrolyte Thin Film Growth Rate for Fuel Cell Applications.
4. Evaluation of Sodium Aluminosilicate Glass Composite Seal with Magnesia Filler.
5. Use of Combustion Synthesis in Preparing Ceramic-Matrix and Metal-Matrix Composite Powders.
6. Low Cost Process for Mullite Utilizing Industrial Wastes as Starting Raw Material.
7. CMC Combustor Liner Design for a Model Ram Jet Engine.
8. X-Ray and Neutron Diffraction Studies on a Functionally-Graded Ti3SiC2-TiC SYSTEM.
9. Ceramic Components in Gas Turbine Engines: Why Has It Taken So Long?
10. Morphology Control of Sofc Electrodes by Mechano-Chemical Bonding Technique.
11. Strain Rate Effects on Fragment Size of Brittle Materials.
12. Effect of Impurities on Anode Performance.
13. Microstructure and Ordering Mode of a Protonic Conducting Complex Sr3(Ca1-xNb2-x)O9-δ Perovskite.
14. Solid Freeform Fabrication of a Piezoelectric Ceramic Torsional Actuator Motor.
15. MMCs by Activated Melt Infiltration: High-Melting Alloys and Oxide Ceramics.
16. Soot Mass Limit Analysis of Sic Dpf.
17. Development of Advanced Co-Fired Planar Solid Oxide Fuel Cells with High Strength.
18. Development of Strong Photocatalytic Fiber and Environmental Purification.
19. Corrosion Resistant Refractory Ceramics for Slagging Gasifier Environment.
20. Ballistic Impact of Silicon Carbide with Tungsten Carbide Spheres.
21. Joining of Advanced Structural Materials by Plastic Deformation.
22. Development of a Tri-Layer Electrochemical Model for a Solid Oxide Fuel Cell.
23. Metallic Bonding of Ceramic Armor Using Reactive Multilayer Foils.
24. Role of Cathode in Single Chamber Sofc.
25. High Surface Area Carbon Substrates for Environmental Applications.
26. A Comparison of the Electrical Properties of Ysz Processed Using Traditional, Fast-Fire, and Microwave Sintering Techniques.
27. Doe Fe Distributed Generation Program.
28. Fabrication of Microstructured Ceramics by Electrophoretic Deposition of Optimized Suspensions.
29. Microstructural Control of Sno2 Thin Films by Using Polyethylene Glycol-Mixed Sols.
30. Ceramic Combustor Design for St5+ Microturbine Engine.
31. Effect of Ni-Al Precursor Type on Fabrication and Properties of Tic-Ni3Al Composites.
32. Overview of Ceramic Materials for Diesel Particulate Filter Applications.
33. High Temperature Seals for Solid Oxide Fuel Cells (Sofc).
34. Sintering and Stability of the Bace0.9−xZrxY0.1O3-δ System.
35. Gas-Pressure Sintering of Silicon Nitride with Lutetia Additive.
36. Chromium Poisoning of Cathodes by Ferritic Stainless Steel.
37. Development of Molb Type Sofc.
38. The Use of Transparent Plzt Ceramics in a Biochemical Thin Film Interferometric Sensor.
39. Indentation Testing of Armor Ceramics.
40. Investigation of a Novel Air Brazing Composition for High-Temperature, Oxidation-Resistant Ceramic Joining.
41. Development of a Compliant Seal for Use in Planar Solid Oxide Fuel Cells.
42. Macro-Micro Stress Analysis of Porous Ceramics by Homogenization Method.
43. Selective Catalytic Reduction and No, Storage in Vehicle Emission Control.
44. Study of High Surface Area Alumina and Ga-Alumina Materials for Denox Catalyst Applications.
45. Formation of Porous Structures by Directional Solidification of the Eutectic.
46. A Performance Based Multi-Process Cost Model for Sofcs.
47. Multifunctional Metal-Ceramic Composites by Solid Free Forming (Sff).
48. Physical Characterisation of Transparent Plzt Ceramics Prepared by Electrophoretic Deposition.
49. Strengthening of Ceramics by Shot Peening.
50. Development of Catalyzed Diesel Particulate Filter for the Control of Diesel Engine Emissions.
Catalog
Books, media, physical & digital resources
Discovery Service for Jio Institute Digital Library
For full access to our library's resources, please sign in.