Search

The poor thermal stability of current commercial white light emitting diodes (WLED) fabricated using a blue chip, a yellow YAG:Ce 3+ phosphor (YAG) and resins, restricts their application in fields where long service time and high power lighting systems are required. Incorporating YAG into glass offers a possible way to resolve the problem by removing the organic resins in LED encapsulation. In the present study, YAG glass-ceramics with bismuth borate glass matrices were prepared using a rapid melt quenching technique. The YAG erosion mechanism was investigated for the first time in various glass matrix compositions at different co-sintering temperatures. The results demonstrate that neither B 2 O 3 nor Bi 2 O 3 individually erodes YAG particles, but the mixtures of B 2 O 3 and Bi 2 O 3 binary glass systems react with YAG and dissolve it almost completely or generate YAl 3 (BO 3 ) 4 (abbreviated as YAB), and they even erode as-produced YAB again under certain conditions. The production of YAB particles increases with the increase of the n Bi /n B ratio at a lower temperature (680 °C), while it first increases and then decreases at a higher temperature (800 °C). The maximum production of YAB can be obtained at the co-sintering temperature of 680 °C with an n Bi /n B ratio of 55:45 or at 760 °C with an n Bi /n B ratio of 35:65. The intermediate Bi 4 B 2 O 9 phase is found during the transformation of YAG into YAB. A simple but efficient approach is proposed to prevent YAG erosion and increase the luminous properties of YAG glass ceramics to a great extent by simply adding Ca 2+ into bismuth borate glass matrices. The degree of YAG erosion decreases with increasing Ca 2+ concentration until an impurity phase appears when the Ca 2+ concentration exceeds 20 mol%. The combination of good white light emission and suitable quantum efficiency as well as higher thermal stability makes the as-prepared YAG glass-ceramics equipped with a blue chip a possible alternative to commercial WLED. [ABSTRACT FROM AUTHOR]