1. Microstructure and ionic conductivity of Li1.5Al0.5Ge1.5(PO4)3 solid electrolyte prepared by spark plasma sintering.
- Author
-
Tong, Huan, Liu, Jingru, Liu, Jian, Liu, Yulong, Wang, Dawei, Sun, Xueliang, and Song, Xiping
- Subjects
- *
SOLID electrolytes , *IONIC conductivity , *MICROSTRUCTURE , *SPECIFIC gravity , *MODULUS of rigidity , *CRYSTAL grain boundaries - Abstract
In this paper, the microstructure and ionic conductivity of Li 1.5 Al 0.5 Ge 1.5 (PO 4) 3 (LAGP) solid electrolytes prepared by spark plasma sintering (SPS) were investigated by XRD, SEM, TEM and EIS, respectively. The results showed that as the sintering temperature was increased, both the relative density and the ionic conductivity of the sintered LAGP samples first increased and then decreased, achieving a maximum value of 97% and 2.12 × 10−4 S cm−1 simultaneously at 700 °C. At the same time, the crystallinity of the sintered samples was improved, while a few impurity phases, such as AlPO 4 and GeO 2 , appeared in the samples. It was also found that carbon contamination and oxycarbide gas was be brought in during SPS. Carbon contamination could produce an extra grain boundary impedance to the samples and could be removed by annealing at 500 °C in an air atmosphere. Oxycarbide gas could affect the relative density of the sintered LAGP samples and could be mitigated by choosing a suitable SPS process. Moreover, the shear modulus of the sintered LAGP was measured to be 49.6 GPa, which exceeded the minimum value of 8.5 GPa that was necessary to suppress Li dendrite growth. [ABSTRACT FROM AUTHOR]
- Published
- 2020
- Full Text
- View/download PDF