Search

Following the rapid growth of lightning technology, the development of red-emitting phosphors is effective for improving color temperature and color rendering index for w-LEDs devices. Herein, a single phased garnet phosphor with cation and polyhedron substitution modification was firstly prepared. For Mg 3 Gd 2 Ge 3 O 12 : Bi3+, Eu3+, the intensity has been remarkably improved by about 16% compared to the one without Bi3+ sensitization. The energy transfer mechanism is identified in this work. Based on cation and polyhedron substitution strategies, novel phosphors with different compositions were obtained and further modified the PL properties. With Lu3+ substitution, the bond lengths between Bi3+ ion and anion ligands are decreased and the site symmetry has been strengthened, which leads to a 21 nm blue shift when Lu3+ totally replaced Gd3+ ions. In addition, Lu3+ and [SiO 4 ] substitution strategies both effectively increased symmetric rigid structure, which leads to a significant improvement in thermal stability, indicating the samples own great potential in optical applications This work provides a new insight to synthesis red-emitting phosphors for warm white-LEDs. [ABSTRACT FROM AUTHOR]

Ba 3 Sc(PO 4 ) 3 :Eu 2+ ,Tb 3+ (BSP:Eu 2+ ,Tb 3+ ) phosphors were successfully prepared via conventional high-temperature solid-state reaction, their luminescence properties as well as energy transfer mechanism have been investigated in detail. The energy transfer mechanism was proposed to be the dipole–quadrupole mechanism, and the energy transfer efficiency was also estimated. BSP:Eu 2+ ,Tb 3+ phosphors showed a broad emitting band centered at 518 nm and several sharp emission peaks, which were assigned to the 5 d →4 f allowed transitions of Eu 2+ ions and characteristic optical 5 D 4 – 7 F J ( J =6, 5, 4, and 3) transitions of Tb 3+ ions, respectively. The emission color of BSP:Eu 2+ , y Tb 3+ exhibited a controlled luminescence evolution in the green area owing to the Eu 2+ –Tb 3+ energy transfer process. [ABSTRACT FROM AUTHOR]

Rare earth doped luminescent sensing materials as non-contact thermometers have attracted extensive research interests due to their wide applications in areas like military, medical care, aerospace, etc. How to expand the working temperature range and improve the sensitivity has become the focus. In this work, we synthesized a series of apatite-structured luminescent temperature sensors M 2 La 7.9 Ce 0.1 (SiO 4) 6 O 2 (M = Ca, Sr, Ba) via isomorphic substitution. By monitoring the differential changes of emission intensities from Ce3+ at the 7-coordinate and 9-coordinate site respectively when temperature varies, the real-time temperature can be determined. These materials were proven to possess the maximum absolute sensitivity up to 0.825 × 10−3 K−1, 2.63 × 10−3 K−1 and 4.33 × 10−3 K−1, respectively. Meanwhile interesting regular patterns were observed for their temperature sensitivities with the substitution of Ca, Sr and Ba. Furthermore, through studying the temperature sensitivity of Ba 2 La 8 (SiO 4) 6 O 2 : x Ce3+ samples with different concentrations, it was found that when the Ce3+ content was at the optimal doping concentration of 0.7, the absolute sensitivity of the sample reached 14.64 × 10−3 K−1 at 573 K. This finding has opened up a new avenue for designing fluorescent temperature sensors. Synopsis: In this work, Ce3+ were doped into a series of phosphor-structured matrices containing two cationic sites (7-coordinated Ce1 and 9-coordinated Ce2 sites) via the solid-state high-temperature method. Due to the different temperature dependencies of luminescence intensities between the two Ce3+ sites, their intensity ratio could be used for temperature calibration. [Display omitted] [ABSTRACT FROM AUTHOR]

Hydroxyapatite (HAP) commonly undergoes doping with various dopants, leading to the emergence of new properties. In this study, HAP is co-doped by terbium (Tb) and europium (Eu) to impart HAP with photoluminescent properties. By controlling the Tb3+ amount to 7.5 × 10−5 mol unchanged, it is observed that when the doping amount of Eu3+ reaches 4.0 × 10−5 mol, the band gap measures 3.919 eV, with maximum fluorescence intensity. Notably, a dipole-dipole energy transfer type from Tb3+ to Eu3 was identified during this process. Concentration quenching occurs when the Eu3+ amount exceeds 4.0 × 10−5 mol. In addition, the Tb3+ and Eu3+ co-doped HAP demonstrates excellent thermal stability and a more comprehensive emission wavelength range than Tb3+-doped HAP or Eu3+-doped HAP. Considering these properties, Tb3+ and Eu3+ co-doped HAP phosphor and aramid/polyphenylene sulfide (ACFs/PPS) fiber paper are organically compounded, resulting in functional fabrics with excellent low-temperature stability. These available fabrics are made of luminescent crystals and fibers can be applied in fields such as high-performance textile testing. Notably, when a specific laser irradiates the damaged area of the textile, fluorescence is not detected by the detector. Moreover, Tb3+ and Eu3+ co-doped HAP has also been shown to be used in the light-emitting diode (LED) to produce the HAP-LED that emits warm white light without commercial phosphors. That expands the application of HAP in anti-counterfeiting, flexible wearables, high-performance textile testing, and semiconductor devices. The color-tunable Tb3+ and Eu3+ co-doped HAP is prepared by hydrothermal synthesis co-precipitation. The energy transfer process between Tb3+ and Eu3+ is proved and the application possibility of Tb3+ and Eu3+ co-doped HAP in fluorescence anti-counterfeiting and LED is discovered. [Display omitted] • The energy transfer mechanism of Tb3+ and Eu3+ in HAP was studied. • By controlling the doping amount of Eu3+, the fluorescence color of Tb3+ and Eu3+ co-doped HAP was tunable. • It expands the application of hydroxyapatite in fluorescent anti-counterfeiting and LED. • HAP exhibited excellent stability when combined with fibers for anti-counterfeiting applications. • The LED emitting bright white light was prepared by using Tb3+ and Eu3+ co-doped HAP without commercial phosphor. [ABSTRACT FROM AUTHOR]

Cryolite-type materials have advantages of low phonon energy, easy rare-earth ion doping, and stable physicochemical properties, and they are considered ideal matrices for up-converting luminescent materials. In this paper, a series of K 3 LuF 6 :Er3+,Yb3+ up-converting materials with cryolite structure were prepared for the first time by high-temperature solid-phase method. The compositions, structures and luminescent properties were systematically characterized by X-ray powder diffractometry (XRD), field emission scanning electron microscopy (SEM) and fluorescence spectroscopy (PL). Under 980 nm excitation, the sample emission spectra mainly consisted of green and red emission bands with peaks at 525, 546 and 662 nm, corresponding to the 2H 11/2 -4I 15/2 , 4S 3/2 -4I 15/2 and 4F 9/2 -4I 15/2 electron transitions of Er3+, respectively. In addition, the temperature sensing characteristics of two thermally coupled energy levels (2H 2/11 and 4S 3/2) were studied based on the fluorescence intensity ratio (FIR) technique in the range of 79–579 K. All the results show that K 3 LuF 6 :Er3+/Yb3+ up-converting luminescent materials have excellent temperature sensing performance in the ultra-wide temperature range and have broad application prospects in the field of temperature sensing. [ABSTRACT FROM AUTHOR]

Abstract A set of Eu3+, Dy3+ and Tb3+ doped novel scheelite-type LiCaGd(WO 4) 3 (LCGW)-based phosphors was prepared via a conventional solid-state reaction method. The X-ray diffraction (XRD), transmission electron microscopy (TEM) analysis, characteristics of luminescence, PL thermostability, decay lifetimes, as well as CIE coordination were investigated to characterize the as-prepared samples in detail. The XRD analysis indicated that the Eu3+, Dy3+ and Tb3+ ions were incorporated into the LCGW host lattice. Under the ultraviolet radiation, the characteristic emission lines of Eu3+ (5D 0 –7F 2), Dy3+ (4F 9/2 –6H 13/2) and Tb3+ (5D 4 –7F 5) ions were observed. The Eu3+ and Tb3+ single-doped LCGW fluorescent powders showed bright red and green emissions, respectively, without concentration quenching. As well as the Dy3+ doped LCGW phosphors radiate a strong yellow light at optimal Dy3+ concentration 0.08 mol. The efficient energy transfer phenomenon was observed for the Eu3+/Dy3+ and Tb3+/Dy3+ ions. The emission color of the LCGW: x Tb3+/0.08Dy3+ samples was tuned from yellow (0.4074, 0.4727) to green (0.3604, 0.5521) via adjusting the Tb3+ concentration. The emission color of LCGW: y Eu3+/0.08Dy3+ can be tuned from yellow (0.491, 0.3856) to red (0.5694, 0.3512) by variation of the Eu3+/Dy3+ ratio. Additionally, the thermal stability of the luminescence in the LCGW phosphors doped by Eu3+, Tb3+, Dy3+ ions was studied. The results verified that the LCGW:Ln3+ (Ln = Tb, Eu, Dy) phosphors are promising for applications in white LEDs. [ABSTRACT FROM AUTHOR]

In this study, La 2 (MoO 4) 3 doped with Eu3+ was synthesized by the high-temperature solid-state method. The phase composition of the Eu3+-doped La 2 (MoO 4) 3 sample was confirmed by X-ray powder diffraction (XRD) analysis, and the microstructure was observed via the scanning electron microscopy (SEM). Under the excitation at 211 nm, the room temperature emission spectra of Eu3+ in the samples with different doping levels were recorded. In addition, the prepared La 2 (MoO 4) 3 : x Eu3+ (x = 0–0.25) phosphors were color tunable. A non-contact optical thermometer with high sensitivity and high-temperature resolution was fabricated based on the different thermal quenching behaviors of the Mo–O group and Eu3+ center. The fluorescence intensity ratio (FIR), temperature resolution (ΔT), maximum absolute and relative sensor sensitivity (Sa and Sr) of La 2 (MoO 4) 3 :Eu3+ were calculated according to different thermal quenching effects between room temperature (298K) and 573K of Eu3+ and Mo–O group. These results show that La 2 (MoO 4) 3 :Eu3+ has excellent sensitivity and temperature resolution, good reversibility and reliability, as Sa = 0.0525 K-1, Sr = 0.3724. % K−1, ΔT = 0.0806 K and the FIR error was only 0.62%. Therefore, the Eu3+-doped La 2 (MoO 4) 3 is a promising candidate material for high performance non-contact optical thermometers. [ABSTRACT FROM AUTHOR]

The lanthanide-doped fluorescence intensity ratio (FIR) temperature measurement technology for detecting inaccessible objects has attracted the attention of many scholars. In fact, FIR technology can achieve high-precision and non-contact temperature measurement, which is widely used in the biomedical and industrial fields, among others. In this study, novel pyroxene-type CaScAlSiO 6 :Tb3+/Sm3+ ceramics (CSAC) were synthesized using the traditional high-temperature solid-phase method, with the crystal structure, energy transfer mechanism, and optical behavior of the ceramics subsequently studied in detail. The use of 5D 4 →7F 5 and 4G 5/2 → 6H 7/2 (I 544nm /I 602nm) energy level transitions as an optical thermometer has great potential, with the maximum absolute and relative sensitivity of the sensor found to be 0.1403 K−1 and 1.65%K−1, respectively. In addition, the material was cycled three times in the temperature range of 77–287 K and demonstrated a particularly high degree of credibility, with the luminous intensity having a particularly small effect on the temperature changes. Overall, the results indicate that the green-light-emitting CSAC:0.08Tb3+/0.01Sm3+ ceramic has great potential for use in optical cryothermometers. [ABSTRACT FROM AUTHOR]

The series of novel phosphors Ca 9 La(PO 4) 5 [(Si 1- x Ge x O 4)]F 2 :0.15Dy3+ with x = 0, 0.25, 0.50, 0.75 and 1 (CLPS 1- x G x F:0.15Dy3+) with apatite-type structure (space group P 6 3 / m) has been synthesized. The crystal structure and electronic structure have been studied by powder X-ray diffraction (PXRD) in combination with the atomic-scale density functional theory (DFT) calculations. A combination of Raman, nuclear magnetic resonance (29Si NMR) spectroscopy and the evolution of Dy3+ ions photoluminescent properties was used to characterize the local crystal structure features. Based on the variation of the [SiO 4 ] by [GeO 4 ] tetrahedral substitutions in the apatite-type structure, the difference in the thermal stability and decay curves of CLPS 1- x G x F:0.15Dy3+ phosphors were referred to crystal chemical stability of as-prepared compounds, which is also confirmed by the values of polyhedral distortion, bond valence sum (BVS) and DFT calculations. The present study provides new insights the synthetic methodology and fundamental characterizations into the design of new phosphors combined with theoretical methods. [ABSTRACT FROM AUTHOR]

Porous geopolymers are energy saving, environment-friendly and simple in preparation. However, the thermal conductivity (TC) of present porous geopolymers as well as other inorganic thermal insulation materials can be hardly below 0.050 W m-1 K-1 in the markets. In order to further decrease the TC of porous geopolymers, it is vital to understand the heat transfer mechanism of this type of materials. In this work, we made a comparison among the main heat transfer models for porous two-component system reported so far including series model, parallel model, geometric mean model, Maxwell-Eucken equation, Hashin spherical structure model and novel effective medium theory (NEMT) based on the data reported in references and obtained by our group for porous geopolymers, and found that NEMT could describe the heat transfer mechanism of porous geopolymers better. Then we systematically studied the relationship among the effective TC (k e), porosity (ε), TC of solid skeleton (k s) and TC of the uniform medium reflecting the heat conduction of the solid skeleton to air (k m) based on the calculations with NEMT. It was found that it is essential to increase ε and decrease k s and k m for reducing the TC of porous geopolymers. Under the guidance of above calculations, we successfully designed and obtained some porous geopolymers with TC as low as 0.040 W m-1 K-1. This paper offers not only several porous geopolymers with low TC, but also an idea to design novel thermal insulation materials. [ABSTRACT FROM AUTHOR]

Tb 3+ -Sm 3+ co-doped Sr 9 Gd(PO 4 ) 5 (SiO 4 )F 2 (SGPSF) phosphors were prepared through a solid-state reaction, and their luminescence properties as well as energy transfer mechanism have been investigated in detail. The SGPSF:Tb 3+ , Sm 3+ phosphors system could be efficiently excited at wavelengths ranging from 200 to 500 nm, which is well matched with the spectra of near ultraviolet chips. The emission of SGPSF:Tb 3+ , Sm 3+ phosphor covers the entire visible region with sharp peaks in the blue, green, and red regions. The emission color of SGPSF:Tb 3+ , Sm 3+ could be adjusted from green (0.275, 0.378) to red (0.519, 0.295) by controlling the doping content of Sm 3+ /Tb 3+ . [ABSTRACT FROM AUTHOR]

In this paper, a series of novel luminescent Sr 10− x (SiO 4 ) 3 (SO 4 ) 3 O: x Eu 2+ phosphors with apatite structure were synthesized by a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, as well as the PL thermal stability were investigated. Sr 9.92 (SiO 4 ) 3 (SO 4 ) 3 O:0.08Eu 2+ phosphor exhibits better thermal quenching resistance, retaining the luminance of 66.55% at 150 °C compared with that at 25 °C. The quenching concentration of Eu 2+ in Sr 10 (SiO 4 ) 3 (SO 4 ) 3 O was about 0.08 (mol) with the dipole–quadrupole interaction. The Sr 10− x (SiO 4 ) 3 (SO 4 ) 3 O: x Eu 2+ phosphors exhibited a broad-band green emission at 538 nm upon excitation at 396 nm. The results indicate that Sr 10− x (SiO 4 ) 3 (SO 4 ) 3 O: x Eu 2+ phosphors have potential applications as near UV-convertible phosphors for white-light UV LEDs. [ABSTRACT FROM AUTHOR]

In this paper, a series of novel luminescent Sr 1− x Al 12 O 19 : x Eu 2+ phosphors were synthesized by a high temperature solid-state reaction. The phase structure, photoluminescence (PL) properties, as well as the decay curves were investigated. The quenching concentration of Eu 2+ in SrAl 12 O 19 was about 0.15 (mol). Upon excitation at 378 nm, the composition-optimized Sr 0.85 Al 12 O 19 :0.15Eu 2+ exhibited strong broad-band green emission at 530 nm with the CIE chromaticity (0.2917, 0.5736). The results indicate that Sr 1− x Al 12 O 19 : x Eu 2+ phosphors have potential applications as green-emitting phosphors for UV-pumped white-light LEDs. [ABSTRACT FROM AUTHOR]