Search

An innovative approach for fabricating porous alumina ceramics (PACs) with improved mechanical and thermal properties using walnut shell powders as pore-forming agent combined with alumina sol impregnation is reported in the present work. It is demonstrated that uniform distribution of spherical pores can be observed in as-prepared PACs by using above technical route. The decrease of walnut shell powder sizes significantly promotes the enhancement of crushing strength and reduction of thermal conductivity of the PACs. Meanwhile, the impregnated alumina sol is favoring for the formation of spherical micro-pores, then further improves their mechanical and thermal insulation performances. The lowest thermal conductivity and highest crushing strength of resulting sample reach 0.16 W/m K and 29.2 MPa, respectively. This novel method offers new possibilities to fabricate high-quality PACs. [ABSTRACT FROM AUTHOR]

Compressive strength is one of the most important mechanical properties for ceramic foams but the dependence of compressive strength of highly porous ceramic foams on porosity remains unclear up to now, especially for the ceramic foams with porosity above 94%. In this paper, the relationship between compressive strength and porosity of ceramic foams with high porosity in the range of 79–98% was studied for the first time. The alumina ceramic foams and zirconia foams were prepared by particle-stabilized foaming method using sodium dodecyl sulfonate (SDS) as foaming agent. It was found that the function relation between compressive strength and porosity depended on porosity level. Specifically, compressive strength of ceramic foams fitted well with Rice Model when the porosity ranged from 79% to 94%. When the porosity increased above 95%, compressive strength of ceramic foams showed linear relation to porosity, which was probably due to the characteristic of highly porous ceramic foams with thin and lamellate cell wall. [ABSTRACT FROM AUTHOR]

We prepared porous Si 3 N 4 ceramics with highly ordered and unidirectionally aligned channels by the self-organization method using an alginate template. The obtained samples show uniform pore distribution, high cell density, good mechanical strength and hierarchical pore structure. A great number of long fibrous β-Si 3 N 4 grains protrude into channels, and other short length fibrous β-Si 3 N 4 grains interlock within channel walls forming a peculiar hierarchical pore structure. The pore size, thickness of channel walls, cell density, porosity and mechanical properties of the sintered porous Si 3 N 4 ceramics could be controlled by choosing different solid loadings, whereas β-Si 3 N 4 grains growth could be controlled by adopting different sinter temperatures. [ABSTRACT FROM AUTHOR]