Search

Nano-SiO 2 porous thermal insulating material (TIM) has drawn tremendous research interests due to its advantages of low density, high porosity and low thermal conductivity. However, its long-term stability in humid environment can be severely deteriorated by the high hydrophilicity resulting from tetrahedral coordination of oxygen and capillary effect of porous structure. It is still a great challenge to cost-effectively fabricate bulk TIM with superior hydrophobicity and consequent remarkable self-cleaning capability. Herein, via an oil-in-water microemulsion treatment, we have proposed a new strategy to construct 3D superior hydrophobic nano-SiO 2 porous TIM. The polymethylhydrosiloxane-modified TIM exhibits a large water contact angle of 166°, and corresponding excellent self-cleaning characteristic while maintaining low thermal conductivity of 0.031 W/m·K. Moreover, our high hydrophobicity of TIM exhibits excellent durability under high temperature up to 400 °C, high humidity of 100%, and chemical erosions. Detailed knowledge of the physical chemistry basis of the superior hydrophobic nano-SiO 2 porous TIM can provide great opportunity to fabricate advanced self-cleaning and heat insulating devices especially targeted for harsh environments. [ABSTRACT FROM AUTHOR]

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

We have optimized a CuO-doped silver paste to significantly improve the adhesion strength of silver thick film on AlN ceramic substrate, which can be widely applied in power electronic packaging applications. Via a combination of scanning electron microscope and X-ray diffraction, we have systematically studied the silver layer morphology on top of AlN ceramic substrate, and the interphases between the silver thick film and AlN substrate. Due to the CuAl 2 O 4 intermediate formed at the silver layer/AlN interface, the adhesion strength of silver thick film can be greatly improved. Particularly, the silver paste with 3 wt% nano-CuO sintered on AlN ceramic substrate exhibits high adhesion strength of 15.3 MPa with good electrical conductivity of 0.9 mΩ/□. [ABSTRACT FROM AUTHOR]

This paper presents that polyethylene glycol (PEG) synthesizes a form-stable phase change material (FS-PCM) with high thermal conductivity and considerable heat storage density. PEG was confined to the chain structure of epoxy resin (EP) via high-temperature melt blending and curing, which solves the leakage problem of PCMs during phase transformation. In order to increase the thermal conductivity and stability of the PEG/EP while maintaining good heat storage capacity and insulation ability, a low loading of reticulated porous Al 2 O 3 ceramic (RPC) was introduced into the PEG/EP matrix. RPC increases the thermal conductivity of FS-PCM by 5.5 times and the heat storage rate by 4 times. In addition, FS-PCM filled with 13.8 vol% RPCs has a coefficient of thermal expansion (CTE) of 80 ppm/K at 85–150 °C -a decrease of 62% over the matrix. Furthermore, the BN network is formed on RPC by vacuum impregnation technology, which further improves the thermal conductivity. This novel FS-PCM has excellent comprehensive properties and does not need for case package, indicating great prospects in thermal management and thermal storage. [ABSTRACT FROM AUTHOR]