Search

The high integration density of microelectronic devices leads to local heat accumulation, and effective heat dissipation and signal transmission of packaging materials have become the primary issues to be solved. However, existing polymer materials have difficulty meeting the requirements due to their unsatisfactory thermal conductivity and thermal expansion properties. In this work, we proposed the use of digital light processing (DLP) printing technology to construct a triply periodic minimum surface (TPMS) skeleton, and a continuous and efficient heat conduction path was successfully constructed in epoxy resin by impregnating h-BN on the skeleton surface. When the loading of h-BN was 20 vol%, the thermal conductivity of the TPMS(SiO 2)@BN/EP(BN) composites was 1.86 W/(m·K), which was 786 % higher than that of pure epoxy resin. In addition, the thermal expansion coefficient of the composites decreased by more than 70 %. At the test frequencies of 3∼10 MHz, the composites showed stable dielectric properties, and the dielectric constant was always maintained in a low range, between 3.85 and 4.15. This work has realized the transformation of the method for constructing a heat conduction path from disordered to ordered and from random to repeatable. This provides a new strategy for the selection of microelectronic packaging materials. [ABSTRACT FROM AUTHOR]

Reported here is a systematical investigation on the crystal structure, magnetic properties and magnetocaloric (MC) effect of three rare earth (RE) molybdate RE 2 MoO 6 (RE = Dy, Tb and Gd) oxides. The X-ray powder diffraction and the morphology as examined using the scanning electron microscope indicate phase-pure and polycrystalline nature of these oxides. The temperature (2–100 K) and magnetic field (up to 5 T) dependence of the magnetic measurements determine the magnetic phase transition (MPT) and MC properties. All the present RE 2 MoO 6 oxides crystallize in a monoclinic structure belonging to C 2/ c space group with the antiferromagnetic ordering at low temperature. Moreover, the RE 2 MoO 6 oxides hold reasonable values of MC parameters including the maximum isothermal magnetic entropy change/temperature-averaged entropy change (2 K lift) and relative cooling power values have been evaluated with the magnetic change of 0–5 T, yielding 17.22 (17.08) J/kgK and 277.67 J/kg for Dy 2 MoO 6 , 17.03 (16.83) J/kgK and 261.12 J/kg for Tb 2 MoO 6 , as well as 27.68 (26.69) J/kgK and 228.14 J/kg for Gd 2 MoO 6 , respectively. These acceptable MC parameters make the present RE 2 MoO 6 oxides potential candidates for cryogenic magnetic refrigeration (MR). [ABSTRACT FROM AUTHOR]

In this paper, a detailed investigation with respect to the structural, cryogenic magnetic properties and magnetocaloric performances of RE 2 CuMnO 6 (RE = Gd, Dy, Ho and Er) double perovskite (DP) compounds has been performed. All the RE 2 CuMnO 6 compounds are confirmed to B -site disordered and crystallized in the GdFeO 3 -type structure (Pnma space group, N 62, oP20). The magnetic transition temperatures (T M) are found to be ~7.5 K for Gd 2 CuMnO 6 , ~12.1 K for Dy 2 CuMnO 6 , ~12.2 K for Ho 2 CuMnO 6 , and ~3.6 K for Er 2 CuMnO 6 , respectively. Moreover, for checking the magnetocaloric performances several vital parameters including -Δ S M max (peak value of magnetic entropy change, -Δ S M), TEC (3) (temperature averaged -Δ S M) and RCP (relative cooling powers) are evaluated to be 7.84, 7.73 J/kgK and 151.1 J/kg for Gd 2 CuMnO 6 , 5.69, 5.59 J/kgK and 180.9 J/kg for Dy 2 CuMnO 6 , 7.12, 7.05 J/kgK and 192.4 J/kg for Ho 2 CuMnO 6 , as well as 9.92, 9.60 J/kgK and 195.9 J/kg for Er 2 CuMnO 6 under the magnetic field change Δ H = 5 T, respectively. [ABSTRACT FROM AUTHOR]

In this study, we present the crystal structure, magnetic properties, and cryogenic magneto-caloric effect (MCE) of RE 2 FeAlO 6 (RE = Gd, Dy, Ho) oxides. The XRD refinement analysis suggests that all the RE 2 FeAlO 6 oxides are crystallized in B-site disordered orthorhombic structure. The RE 2 FeAlO 6 oxides exhibit large MCEs around T C. The peak magnetic entropy change (-Δ S M) and refrigeration capacity (RC) are 25.9 J/(kgK) and 240.1 J/kg for Gd 2 FeAlO 6 , 10.7 J/(kgK) and 274.9 J/kg for Dy 2 FeAlO 6 , 9.6 J/(kgK) and 249.6 J/kg for Ho 2 FeAlO 6 under Δ H of 0–70 kOe, respectively. Notably, Gd 2 FeAlO 6 exhibits promising magneto-caloric performance and therefore is a favorable candidate for cryogenic magnetic refrigeration. [ABSTRACT FROM AUTHOR]

Abstract Double perovskite Pr 2 NiMnO 6 (PNMO) and Pr 2 CoMnO 6 (PCMO) ceramics have been synthesized and their crystal structure, microstructure, as well as cryogenic magnetic properties and magnetocaloric performance have been investigated. The crystal structure of PNMO and PCMO ceramics was determined to be monoclinic with space group of P21/n at room temperature. A ferromagnetic to paramagnetic (FM-PM) phase transition (second-order) occurred in PNMO and PCMO around 208 and 170 K, respectively. Significant reversible magnetocaloric effect (MCE) was found and the values of the maximum magnetic entropy change (-Δ S M max) were 3.15 and 3.91 J/kg-K under the magnetic field change (Δ H) of 0–7 T in PNMO and PCMO, respectively. The corresponding relative cooling power (RCP) values were 241.9 and 229.9 J/kg. [ABSTRACT FROM AUTHOR]

Pyrochlore RE 2 TiMnO 7 ( RE = Dy and Ho) compounds were synthesized using a ceramic method, and their crystal structures, microstructures, and cryogenic magnetic properties were determined. Dy 2 TiMnO 7 and Ho 2 TiMnO 7 compounds belong to the Fd-3m space group with a cubic pyrochlore structure and show a considerable reversible magnetocaloric effect (MCE) in the vicinity of the second-order ferromagnetic-paramagnetic (FM-PM) phase transition at the Curie temperature ( T C ) of 7.6 and 7.5 K, respectively. The obtained maximal values of magnetic entropy change (-Δ S M max ) for Dy 2 TiMnO 7 and Ho 2 TiMnO 7 are 12.50 and 13.95 J/kg K under a magnetic field change (Δ H ) of 0–7 T, respectively. Correspondingly, the relative cooling power ( RCP ) values reach 530.3 and 573.2 J/kg, respectively. [ABSTRACT FROM AUTHOR]

Here we report on a detailed investigation of the crystal structure, cryogenic magnetic and magneto-caloric properties in Ho 2 BaCuO 5 cuprate. The Ho 2 BaCuO 5 crystallized in the orthorhombic crystal structure with Pbnm space group and undergoes a paramagnetic (PM) to antiferromagnetic (AFM) transition at the Néel temperature ( T N ) of 12.5 K. An obvious signal change in the magneto-caloric effect (MCE) was observed, which is correlated with the fact of the AFM ground state inducing a small negative magnetic entropy change (-Δ S M ) at/below T N and a field-induced metamagnetic transition (first ordered) from AFM to ferromagnetic (FM) producing a large positive -Δ S M above T N . For a magnetic field change of 0–7 T, the -Δ S M max ≈ 10.4 J/kg K, RCP ≈ 263 J/kg and RC ≈ 199 J/kg for the maximum magnetic entropy change, relative cooling power and refrigerant capacity are evaluated, respectively. [ABSTRACT FROM AUTHOR]

We herein provided a systematical determination of the structural and magnetic properties, especially of the magnetocaloric effect (MCE) and magnetocaloric performances of four rare-earth oxychlorides, i. e., the RE OCl (RE = Ho, Dy, Tb and Gd) compounds. The studied RE OCl compounds are all crystallized in the tetragonal matlockite structure (P 4/ nmm space group) and the RE , O, and Cl elements are with the RE 3+, O2−, and Cl− valence states, respectively. The DyOCl, TbOCl and GdOCl compounds reveal an antiferromagnetic transition at around approximate 9.5, 3.7 and 4.8 K, respectively. The magnetocaloric performances are checked by the maximum magnetic entropy change, relative cooling power, and temperature-averaged entropy change with 5 K lift, which are found to be 14.16 J/kgK, 375.55 J/kg and 13.89 J/kgK for HoOCl, to be 14.88 J/kgK, 488.14 J/kg, and 14.60 J/kgK for DyOCl, to be 14.59 J/kgK, 419.67 J/kg, and 14.42 J/kgK for TbOCl, and to be 16.16 J/kgK, 213.68 J/kg, and 14.39 J/kgK for GdOCl, with the magnetic field change of 0–7 T, respectively. [ABSTRACT FROM AUTHOR]

We herein fabricated two gadolinium-transition metal-based high entropy (HE) oxides of Gd(Mn 0.25 Fe 0.25 Al 0.25 Cr 0.25)O 3 [denoted as Gd(4 TM 0.25)O 3 ] and Gd(Mn 0.2 Fe 0.2 Al 0.2 Co 0.2 Ni 0.2)O 3 [denoted as Gd(5 TM 0.2)O 3 ] and determined their structural, magnetic, and magnetocaloric properties. Both of present HE oxides are found to crystallize in the single-phase perovskite-type orthorhombic structure with a homogeneous microstructure and exhibit prominent cryogenic magnetocaloric performances. The values of magnetic entropy change, refrigerant capacity, and temperature-averaged entropy change (6K-lift) under the magnetic field change of 0–7 T are estimated to be 20.34 J/kgK, 295.4 J/kg, and 19.56 J/kgK for Gd(4 TM 0.25)O 3 , and to be 22.45 J/kgK, 258.2 J/kg, and 20.79 J/kgK for Gd(5 TM 0.2)O 3 , respectively, which are comparable with recently reported candidate materials for practical magnetic cooling. These findings not only indicate potential applications of present perovskite-type Gd(4 TM 0.25)O 3 and Gd(5 TM 0.2)O 3 HE oxides, but also provide meaningful clues for exploring HE oxides with prominent cryogenic magnetocaloric performances. [ABSTRACT FROM AUTHOR]

We herein investigated four rare earth (RE)-based oxides, the RE 2 SiO 5 (RE = Gd, Dy, Ho, and Er) silicates, regarding their structural and cryogenic magnetic properties. All the RE 2 SiO 5 silicates are found to crystallized in a monoclinic structure. X-ray photoemission spectroscopy spectra illustrate that RE , Si and O elements in RE 2 SiO 5 silicates are present as RE 3+, Si4+, and O2−, respectively. The Dy 2 SiO 5 reveals a first-order magnetic transition around 4.5 K. The magnetic phase transition temperatures are probably below 2 K for the RE 2 SiO 5 (RE = Gd, Ho, and Er) silicates. Large cryogenic magnetocaloric effects (MCE) and good magnetocaloric performances were observed in the RE 2 SiO 5 silicates. The MCE parameters in terms of the maximum magnetic entropy changes, the temperature-averaged entropy change (5 K-lift) and refrigerant capacity under a magnetic field change of 0–5 T are determined to be 35.5, 30.4 J/kgK, and 215.7 J/kg for Gd 2 SiO 5 , to be 13.3, 12.9 J/kgK, and 190.5 J/kg for Dy 2 SiO 5 , to be 15.3, 15.1 J/kgK, and 274.1 J/kg for Ho 2 SiO 5 and to be 17.9, 16.5 J/kgK, and 181.14 J/kg for Er 2 SiO 5 , respectively. These derived values of MCE parameters of the RE 2 SiO 5 silicates, especially for Gd 2 SiO 5 , are at similarly high level with or better than those of the updated candidate materials, making them also of potential for practical magnetic refrigeration applications. [ABSTRACT FROM AUTHOR]

The magnetic refrigeration (MR) based on magnetocaloric effect (MCE) is a key technique, since it possesses ideally higher performance than the traditional gas compression technology. However, the lack of MR materials with excellent MCE performance is a bottle-neck for practical MR applications. Herein, we systematically report the structural properties using powder X-ray diffraction and scanning electron microscope as well as the magnetic and magnetocaloric properties through the magnetization measurements of four rare-earth (RE) ruthenate RE 3 RuO 7 (RE = Pr, Nd, Gd and Tb) compounds. Light RE -based Pr 3 RuO 7 and Nd 3 RuO 7 compounds form an orthorhombic Cmcm structure, while heavy RE based Gd 3 RuO 7 and Tb 3 RuO 7 compounds crystallize in an orthorhombic P 2 1 nb structure. The magnetic phase transition of all the present compounds are confirmed to be of the first-order type with T N of 52, 15, 11 and 12 K for Pr 3 RuO 7 , Nd 3 RuO 7 , Gd 3 RuO 7 and Tb 3 RuO 7 compounds, respectively. The related MCE parameters including the maximum isothermal magnetic entropy change, temperature-averaged entropy change (5 K lift), and refrigerant capacity with the magnetic field change of 0–5 T were computed to be 1.35 J/kgK, 1.31 J/kgK, and 27.4 J/kg for Pr 3 RuO 7 , to be 2.18 J/kgK, 2.04 J/kgK, and 25.6 J/kg for Nd 3 RuO 7 , to be 8.12 J/kgK, 7.90 J/kgK, and 124.6 J/kg for Gd 3 RuO 7 , and to be 7.78 J/kgK, 7.49 J/kgK, and 128.8 J/kg for Tb 3 RuO 7 , respectively. [ABSTRACT FROM AUTHOR]

The crystal structure, microstructure, magnetic phase transitions and magnetocaloric effect (MCE) in KNaSnF6-type GdCrWO 6 and ErCrWO 6 oxides have been investigated. Both GdCrWO 6 and ErCrWO 6 oxides are confirmed to crystalize in a polar aeschynite type structure with the space group of Pna 2 1 (No.33, oP36). The grain size remains relatively average according to the SEM graph. Under low magnetic field of 0.1 T, the ErCrWO 6 oxide undergoes two successive magnetic transitions around 22 and 7 K, whereas only a weak magnetic transition around 6 K can be noticed. The paramagnetic Curie temperatures θ p are fitted to be −17.0 and −16.6 K for GdCrWO 6 and ErCrWO 6 oxides, respectively, suggesting that the antiferromagnetic (AFM) interaction is dominant at ground state. With the magnetic field change (ΔH) of 0–7 T, the peak value of magnetic entropy change (-ΔS M), refrigeration capacity (RC), relative cooling power (RCP) and 5 K lift temperature-averaged ΔS M (TEC) are figured to be 9.13 J/kg-K, 152 J/kg, 190 J/kg and 9.07 J/kg-K for GdCrWO 6 as well as to be 5.3 J/kg-K, 128 J/kg, 161 J/kg and 5.09 J/kg-K for ErCrWO 6 , respectively. The MCE parameters for GdCrWO 6 and ErCrWO 6 oxides are comparable with recently reported RE -based MCE oxides, indicating present GdCrWO 6 and ErCrWO 6 oxides also considerable for cryogenic magnetic refrigeration (MR). [ABSTRACT FROM AUTHOR]

In this work, polycrystalline oxides viz., Ho 2 CrMnO 6 (HCMO) and Er 2 CrMnO 6 (ECMO), were prepared using the sol-gel process, and their crystal structure, magnetic properties, and magnetocaloric effects (MCEs) were studied. X-ray refinement results demonstrate that both oxides exhibited the B -site disordered perovskite type structure (Pbnm space group). A ferromagnetic-paramagnetic phase transition as well as large reversible MCEs was also observed at Curie temperatures (T C) of ~6.1 and ~5.2 K for HCMO and ECMO, respectively. For a magnetic field change (ΔH) of 0–7 T, the maximum magnetic entropy change (-Δ S M), temperature-averaged entropy change (TEC 3), and relative cooling power (RCP) were estimated to be 11.03 J/kgK, 11.02 J/kgK, and 322.7 J/kg for HCMO, and 12.94 J/kgK, 12.80 J/kgK and 277.5 J/kg for ECMO. [ABSTRACT FROM AUTHOR]

In this paper, weakly agglomerated and well dispersed α-Al 2 O 3 powders were synthesized by a novel spray precipitation method. It was demonstrated that the as-prepared powders exhibited better dispersity than powders from conventional precipitation due to the increased phase contact and reaction area during the precipitation process. The effects of different titration ways, calcination temperature and holding time on the morphology, phase composition and sintering behaviour of Al 2 O 3 powders were systematically investigated. Weakly agglomerated and well crystallized α-Al 2 O 3 powders were obtained when the as-prepared precursors were calcined at 1150 °C for 2 h in air. The average particle size of α-Al 2 O 3 powders with higher sintering activity was approximately 68.6 nm, and the specific surface area was above 22.4 m 2 g −1 . [ABSTRACT FROM AUTHOR]

Y 2 O 3 transparent ceramics were fabricated from precipitated powders prepared at different stirring speeds during the precipitation process. The influence of the stirring speed on the phase component of precursors, morphology of Y 2 O 3 powders and properties of fabricated ceramics were systematically investigated. Crystalline phase precursors of (NH 4 ) a Y(OH) b (CO 3 ) c ·H 2 O were prepared from 110 rpm, 220 rpm and 550 rpm respectively. But amorphous precursors of Y(CO 3 )(OH)·nH 2 O (n = 1–1.5) were observed when stirring speeds were 330 rpm and 440 rpm. Y 2 O 3 powders prepared from 440 rpm exhibited the lowest agglomeration and the smallest grain size, and the ceramics with the optimal transmittance was accordingly obtained. The results of computational fluid dynamics software CFX showed that a more homogeneous flow field distribution without local circulations could be produced at 440 rpm, which would be benefit for the optical quality of transparent ceramics. The study would provide a considerable reference for the controllable fabrication of well-dispersibility Y 2 O 3 powders and Y 2 O 3 transparent ceramics. [ABSTRACT FROM AUTHOR]