Search

Ionic diodes are components in ionic circuits for AC‐electricity driven desalination and ion extraction processes. Independent of the ionic diode type/mechanism, achieving ionic current rectification at high ionic strengths is challenging but important, for example in seawater desalination and treatment of brine. Here, the butylation of a molecularly rigid (glassy) polymer of intrinsic microporosity (PIM‐EA‐TB) is shown to give anionic diodes with ultrahigh rectification effects (associated with interfacial resistivity) even in high ionic strength aqueous 2 M NaCl solution. The effect is rationalised based on polymer structure affecting ion transport. [ABSTRACT FROM AUTHOR]

In this work, a new polymeric binder (polymer of intrinsic microporosity, PIM‐1) has been investigated and discussed to prepare and characterize composite materials for the cathodic oxygen reduction reaction. The new binder is a polymer of intrinsic microporosity, a family of organic compounds with molecularly rigid (glassy) structure, good mechanical and chemical stability. Their influence on the electrocatalytic behaviour of a commercial electrocatalyst during the oxygen reduction reaction in acidic and alkaline media has been investigated, discussed and compared to the behaviour of common cationic and anionic polymer binders, using rotating disk electrode (RDE) techniques. Polymers of intrinsic microporosity perform similarly well, and sometimes better (due to rigidity and gas permeation) when compared to commercial binders. Thus, herein, we showed that PIMs do represent a very promising and versatile alternative as binders in electrocatalysis. [ABSTRACT FROM AUTHOR]

Graphitic carbon nitride (g‐C3N4) with photo‐attached platinum (Pt@g‐C3N4) is known to generate hydrogen under illumination in aqueous environments in the presence of carbohydrate hole quenchers. Here, Pt@g‐C3N4 is embedded into a polymer of intrinsic microporosity (PIM‐1) host material with a molecularly rigid structure to maintain active unblocked catalyst surfaces and to control transport to/from the photocatalyst. A Clark‐type oxygen/hydrogen sensor is employed with Pt@g‐C3N4 embedded into PIM‐1 applied as a film to be the gas‐permeable sensor membrane. Oxygen reduction and hydrogen production are observed in situ as a function of light exposure and quencher concentration. Significant size‐selectivity favouring smaller more flexible saccharides or carbohydrate/ hydrocarbon quenchers is observed and attributed to rate limiting PIM‐1 micropore transport. Effective hydrogen production through a Teflon membrane is demonstrated. The underlying hydrogen production/ photocurrent enhancing effects of the microporous PIM‐1 film on the photochemical process are revealed. [ABSTRACT FROM AUTHOR]

A film of the polymer of intrinsic microporosity PIM‐7 is coated onto a glassy carbon electrode and the resulting effects on electron transfer reactions are studied for three different types of processes: (i) aqueous solution based, (ii) solid state surface immobilised, and (iii) electrocatalytic processes on electrodeposited palladium. The effects on reactivity for hydroquinone oxidation in aqueous phosphate buffer are shown to be linked to microporosity causing a slightly lower rate of mass transport without detrimental effects on electron transfer and reaction kinetics. Next, water‐insoluble microcrystalline anthraquinone is immobilised directly into the PIM‐7 film and shown to give a chemically reversible reduction process, which is enhanced in the presence of PIM‐7, when compared to the case of anthraquinone immobilised directly onto bare glassy carbon. Electrodeposition of a film of nano‐palladium is demonstrated to give catalytically active electrodes for the reduction/oxidation of protons/hydrogen, the reduction of oxygen, and for the oxidation of formic acid and methanol. With the PIM‐7 film applied onto palladium, a mechanical stabilisation effect occurs. In addition, both the hydrogen insertion and the hydrogen evolution reactions as well as formic acid oxidation are enhanced. Effects are discussed in terms of PIM‐7 beneficially affecting the interfacial reaction under triphasic conditions. The microporous polymer acts as an interfacial "gas management" layer. [ABSTRACT FROM AUTHOR]

Hydrogen oxidation and oxygen reduction are two crucial energy conversion reactions, which are shown to be both strongly affected by the presence of intrinsically microporous polymer coatings on electrodes. Polymers of intrinsic microporosity (PIMs) are known to possess extremely high internal surface area and ability to bind gases under dry conditions. It is shown here that both, hydrogen‐ and oxygen gas binding into PIMs, also occurs under wet or "triphasic" conditions in aqueous electrolyte environments (when immersed in 0.01 M phosphate buffer at pH 7). For two known PIM materials (PIM‐1 and PIM‐PY), nanoparticles are formed by an anti‐solvent precipitation protocol and then cast as a film onto platinum or glassy carbon electrodes. Voltammetry experiments reveal evidence for hydrogen and oxygen binding. Both, PIM‐1 and PIM‐PY, locally store hydrogen or oxygen gas at the electrode surface and thereby significantly affect electrocatalytic reactivity. The onset of oxygen reduction on glassy carbon is shifted by 0.15 V in the positive direction. One for three: Due to their hydrophobic and molecularly rigid nature, intrinsically microporous polymers affect the conditions for gas|liquid electrolyte|solid electrode triphasic reactions. [ABSTRACT FROM AUTHOR]