Search

We reported a colorimetric paper-based device by integrating the modified acid RNA-cleaving DNAzymes (MaRCD-EC1) for highly sensitive (detection limit = 10 2 CFU mL -1 ), and rapid (within 30 min) detection of E. coli without amplification. This device exhibited a clinical sensitivity of 100% and a specificity of 100% in identifying E. coli -associated urinary tract infections (UTIs) using the clinical urine samples.

This communication describes the development of polyvinyl chloride electrochemical system in which a paper layer loaded with reagents is inserted into the device, demonstrating a new concept of a paper card-like pad for a reagent-free and easy measurement of the target analyte in solution. This device detects glucose in artificial tears in the range of 0.2-2 mM with a detection limit of 50 μM by simply adding the artificial tears to the paper card-like pad. The novel configuration goes beyond the state of the art, widening the application range of paper in the design of smart analytical devices.

A scalable, and cost-effective method was employed to prepare self-supported CuSn bimetallic catalyst on carbon paper. The obtained CuSn catalyst demonstrates high faradaic efficiency of CO around or above 90% at a broad potential range from -0.7 to -1.8 V vs. reversible hydrogen electrode, greatly surpassing Cu or Sn counterparts.

Detection and characterization of DNA damage plays a critical role in genotoxicity testing, drug screening, and environmental health. We developed a fully integrated origami paper-based analytical device (oPAD) for measuring DNA damage. This simple device allows on-paper cell lysis, DNA extraction, terminal deoxynucleotidyl transferase dUTP nick end labeling (TUNEL) reaction and signal readout with simple operation steps, enabling rapid (within 30 min) and high throughput assessment of multiple DNA damages induced by exogenous chemical agents.

A novel miniaturized and sustainable platform exploiting two merged paper-based substrates has been applied for the programmable pre-concentration of analytes of interest and electrochemical detection of mercury traces in drinking water using printable sensor strips. This strategy represents a novel versatile possibility in merging humble materials maximizing their impacts on analytical and remediation challenges.

Negative ion mode paper spray mass spectrometry (PS-MS) suffers from intense background noise and unstable MS signal. For the first time, we reported fluorinated boron nitride nanosheet (h-FBN) assisted negative ion PS-MS for the detection of a series of molecules. We demonstrated that the introduction of h-FBN can greatly improve the detection sensitivity and signal stability in the negative ion mode.

The first discrete bimetallic europium(iii)/copper(ii) complex for the fast, sensitive and selective luminescent detection of both aqueous and gaseous hydrogen sulfide has been developed. The chemosensor displayed an impressive response time of 30 seconds and a low theoretical limit of detection (100 ppb) for gaseous hydrogen sulfide.

A bio-inspired cellulose paper-poly(amidoxime) composite hydrogel is explored via UV-polymerization. This hydrogel has a highly efficient uranium capture capacity of up to 6.21 mg g -1 for W U /W dry gel and 12.9 mg g -1 for W U /W poly(amidoxime) in seawater for 6 weeks, due to its enhanced hydrophilicity, good hydraulic/ionic conductivity and broad-spectrum antibacterial performance.

A chemosensor containing an o-hydroxyaniline unit as the reaction site was developed for colorimetric and fluorimetric detection of phosgene, which showed fast response (15 s), high specificity, and an extremely low detection limit. The chemosensor was incorporated into paper strips for visual detection of phosgene vapor.

Herein we demonstrate the first example of oligonucleotide-templated reaction (OTR) performed on paper, using lateral flow to capture and concentrate specific nucleic acid biomarkers on a test line. Quantitative analysis, using a low-cost benchtop fluorescence reader showed very high specificity down to the single nucleotide level and proved sensitive enough for amplification-free, on-chip, detection of endogenous concentrations of miR-150-5p, a recently identified predictive blood biomarker for preterm birth.

We developed a chemical method to covalently functionalize cellulose nanofibers and cellulose paper with mannoside ligands displaying a strong affinity for the FimH adhesin from pathogenic E. coli strains. Mannose-grafted cellulose proved efficient to selectively bind FimH lectin and discriminate pathogenic E. coli strains from non-pathogenic ones. These modified papers are valuable tools for diagnosing infections promoted by E. coli, such as cystitis or inflammatory bowel diseases, and the concept may be applicable to other life-threatening pathogens.

An anthracene carboxyimide derivative was synthesized as a colorimetric and fluorogenic sensor to determine NO 2 with a rapid response (<4 min), excellent selectivity and a low detection limit (84 nM). Paper strips containing the sensor were applied to visually determine the NO - with a rapid response (<4 min), excellent selectivity and a low detection limit (84 nM). Paper strips containing the sensor were applied to visually determine the NO 2 - content in food.

A green and facile method is presented for in situ synthesis of a novel photoluminescence-quenching nanopaper with a highly-efficient quenching ability, rapid reaction time and long-term storage. The as-prepared nanopaper is further used to construct an aptasensor platform with high performance, rapidness and robustness.

A paper/poly(methyl methacrylate) (PMMA) hybrid CD-like microfluidic SpinChip integrated with DNA probe-functionalized graphene oxide (GO) nanosensors was developed for multiplex quantitative LAMP detection (mqLAMP). This approach can simply and effectively address a major challenging problem of multiplexing in current LAMP methods.

A biomimetic device for the reduction of Cu(ii) to Cu(i) consisting of thioglycolic acid covalently grafted to cellulose paper was developed. The device displays exceptionally fast reducing properties allowing the reduction of Cu(ii) in seconds and the formation of deeply colored Cu(i)-SCH2R complexes onto the cellulose paper. This biomimetic and biomaterial-based concept was exploited for the detection of copper in water samples with a limit of detection as low as 2 ppm.

A modular, general method for trapping enzymes within the voids of paper, without chemical activation of cellulose, is reported. Glucose oxidase and peroxidase were crosslinked with poly(acrylic acid) via carbodiimide chemistry, producing 3-dimensional networks interlocked in cellulose fibers. Interlocking prevented enzyme activity loss and enhanced the washability and stability.

An ionophore-based ion-selective optode platform on paper is described for the first time with a sodium optode as the example. Cellulose paper is shown to be an excellent substrate for adsorption of the required chromoionophore, ionophore, and ion-exchanger species. These adsorbed components form a hydrophobic phase that enables heterogeneous optical ion sensing in the absence of any plasticizer or organic polymer phase.

A strategy for aptamer-based biosensing termed linkage inversion assembled nano-aptasensors (LIANAs) is shown to be a generally applicable approach to the sensitive and specific detection of a target molecule in turn-on fluorescence solution-based and paper-based tests.

A novel 3D microfluidic paper-based turn-on electrochemiluminescence origami cyto-device with hollow channels is developed and applied for real-time visual determination of H2S released from multiple cancer cells for the first time.

Herein we report a convenient and sensitive method for the detection of telomerase activity based on upconversion nanoparticle (UCNP) modified cellulose paper. Compared with many solution-phase systems, this paper chip is more stable and easily stores the test results. What's more, the low background fluorescence of the UCNPs increases the sensitivity of this method, and the low telomerase levels in different cell lines can clearly be discriminated by the naked eye.

A thin and flexible paper-based skin patch was developed for the diagnostic screening of cystic fibrosis. It utilized a unique combination of both anion exchange and pH test papers to enable the quantitative, colorimetric and on-skin detection of sweat anions.

We report a robust and recyclable 'dip-catalyst' based on a gold nanoparticle (Au NP)-loaded filter paper composite, prepared by a simple dip-coating process using concentrated Au NP suspensions in toluene. While acting as catalysts, the composites display excellent surface enhanced Raman scattering (SERS) efficiency, allowing the real-time monitoring of chemical reactions.

A method using ink-jet printing for constructing multi-enzyme systems was proposed, in which a precisely defined enzyme ratio and two-dimensional distribution was obtained by the preset 'color' values. The applications of the print-on-paper multi-enzyme systems were exemplified by the detection of glucose and the design of an enzyme-enabled two-dimensional code.

A disposable paper-based bipolar electrode (BPE) was reported for the first time for the sensitive electrochemiluminescence detection of a prostate specific antigen (PSA).

A novel paper working electrode with Pt nanospheres grown in it (Pt-PWE) was first used as a sensor platform and then cancer cells were immobilized on the Pt-PWE (high affinity binding with aptamers). This electrode was first designed to achieve the in situ and real-time determination of H2O2 released from cancer cells to obtain an accurate determination.

Would it not be nice to have an organic solvent nanofiltration membrane made from renewable resources that can be manufactured as simply as producing paper? Here the production of nanofiltration membranes made from nanocellulose by applying a papermaking process is demonstrated. Manufacture of the nanopapers was enabled by inducing flocculation of nanofibrils upon addition of trivalent ions.

This Communication describes a prototype quantitative paper-based assay that simultaneously measures the levels of Pb(2+) and Hg(2+) in water. The assay requires only measurements of time to yield a quantitative readout, and the results are independent of sample volume, humidity, and sample viscosity.

ZnO nanorods inorganic-organic heterostructured light-emitting diodes have been demonstrated on a cheap/disposable paper substrate and applied in multiplexed photoelectrochemical immunoassay.

We demonstrate a flexible paper-based biofuel cell using porous carbon inks for high power output. The power density of the fabricated biofuel cell reached 0.12 mW cm(-2) (at 0.4 V), which is the highest output power reported to date, to the best of our knowledge.

A simple and sensitive 3D microfluidic origami multiplex electrochemical immunodevice was developed for the first time using a novel nanoporous silver modified paper working electrode as a sensor platform and different metal ion functionalized nanoporous gold-chitosan as a tracer.

In this report, hierarchical ZnO nano- and microstructures were directly grown for the first time on a bacterial cellulose substrate and on two additional different papers by hydrothermal synthesis without any surface modification layer. Compactness and smoothness of the substrates are two important parameters that allow the growth of oriented structures.

A simple and sensitive 3D origami multiple electrochemiluminescence immunodevice based on a novel silver nanoparticles modified porous paper working electrode as a sensor platform and multi-labeled nanoporous gold-carbon spheres as tracers has been demonstrated for the first time.

A self-powered 3D microfluidic electrochemiluminescence biosensing platform, integrated with a stable, environmentally-friendly and noble metal-free primary battery, was developed for the first time based on the principle of origami.

A photoelectrochemical immunoassay was introduced for the first time into a microfluidic paper-based analytical device equipped with a paper supercapacitor for low-cost, simple, portable, and disposable point-of-care testing, based on a chemiluminescence light source and a digital multi-meter.

A simple, low-cost, and sensitive 3D microfluidic origami electrochemiluminescence aptamer-device was developed based on a novel gold nanoparticle modified porous paper working electrode for point-of-care diagnosis.

A facile route that combines co-assembly and photothermal reduction was developed to synthesize free-standing, flexible FeF(3)-graphene papers. The papers contain well-dispersed FeF(3) nanoparticles and open diffusion channels in a porous, electrically conducting network of graphene sheets, and demonstrate promising applications as cathodes in high-energy density Li-ion batteries.

A novel addressable electrode array based on paper was assembled on the crossing points of the row/column electrodes to form a 4 × 6 sensor array by a facile home-made device-holder, one paper layer contained the sensing sites, the other paper layer the printed counter electrode and reference electrode.

We present a facile production approach to highly efficient SERS test strips by physical vapor deposition of silver on paper, which contains natural wrinkle and fibril structures. The SERS test strips open the door to highly sensitive (e.g., 10(-10) M) SERS detection in a convenient fashion.

A high-throughput, simple, fast, low-cost and sensitive paper-based electrochemical immunodevice has been demonstrated based on a functionalized 3D paper-based device for point-of-care diagnosis., (This journal is © The Royal Society of Chemistry 2012)

Non-polar solvents like hexane allow ionization of insoluble drugs, peptides, nucleotides and phospholipids as solids from paper. Ambient ionization is achieved simply by application of a high voltage to the wet paper. Transport and ionization mechanisms are discussed, including the possibility of field desorption from dendritic structures formed on the paper.

We used relief and planographic printing methods to print the catalytic effect of an enzyme, but not the enzyme molecules, onto paper. Printing enzymatic reactions have applications in bioactive papers, low-cost diagnostics, anti-counterfeiting devices and advanced packaging materials. These methods can create novel printing effects on commodity surfaces for advanced applications.

Paper strips containing DNA-conjugated microgels (MG) are used to achieve sensitive DNA detection in three steps: target DNA promoted ligation of a DNA primer to the MG-bound DNA, rolling circle amplification (RCA) between the primer and a circle DNA, and hybridization of the RCA products and a fluorescent DNA probe.

Cu nanoparticles (CuNPs) were successfully synthesized in situ on ZnO whiskers as a selective scaffold, which were supported in a microstructured paper matrix composed of inorganic fibers; as-prepared paper composites were easy to handle in practical use and demonstrated excellent catalytic performance in the methanol reforming process for effective hydrogen production.

Superhydrophobic cellulose-based materials coupled with transparent, stable and nanoscale polymethylsiloxane coating have been successfully achieved by a simple process via chemical vapor deposition, followed by hydrolyzation and polymerization.