Search

Modified natural polymer flocculants has been the focus of research in environmental engineering field. Natural large molecular compound, chitosan (CTS) with many functional amino and hydroxyl groups can be easily modified to enhance its original functions. This work presents an environmentally friendly chitosan-based cationic polyacrylamide flocculants (CTS-g-PAMA) with enhanced function of sterilization and flocculation. CTS-g-PAMA was synthesized through Ultraviolet (UV)-initiated copolymerization. Structure characterization of FTIR, 1 H NMR, XRD and UV spectrum confirmed the successful grafting of AM and MAPTAC. Scanning electron microscopy (SEM) analysis results showed that CTS-g-PAMA exhibited a porous structure with a prodigious surface area. CTS-g-PAMA was then applied to treat a series of simulated waste water containing kaolin or Escherichia coli . Flocculation tests indicated that CTS-g-PAMA not only showed excellent flocculation effect but also showed high sterilization capability. A series of ONP concentration measurement tests through UV spectra analysis and 3D EEM analysis of suspension before and after flocculation were conducted to study sterilization mechanism, and results revealed the sterilization effect of CTS-g-PAMA was essentially bactericidal, not just antibacterial. [ABSTRACT FROM AUTHOR]

Highlights: [•] A novel cationic flocculant P(AM–DAC–BA) was synthesized and characterized. [•] P(AM–DAC–BA) was synthesized through ultraviolet (UV) initiation. [•] P(AM–DAC–BA) prepared in quartz reactor was porous structure. [•] Comparison between quartz reactor and glass reactor was well studied. [•] P(AM–DAC–BA) was efficient in the dewatering of the textile sewage sludge. [ABSTRACT FROM AUTHOR]

• The relationship between coagulation-flocculation and sterilization was emphasized. • Two flocculants played the different roles in drinking water treatment. • The synergistic effect of two coagulants for sterilization was confirmed by Contour Method. • Sterilization mechanism and kinetics of flocculants were revealed for the first time. • Sterilization was divided into two processes, rapidly adsorbing and slowly killing. In this study, the relationship between coagulation-flocculation and sterilization was studied using two conventional flocculants, polyaluminum chloride (PAC) and poly dimethyl diallyl ammonium chloride (PDMDAAC). Simulated wastewater containing kaolin and Escherichia coli was prepared. The bacterial removal rates of PAC and PDMDAAC under the same dosage are 46.3% and 19.5%, respectively. Which is far less than that of combined flocculants (94% bacterial removal rate). The synergistic effect of two flocculants was proved by contour method. β-Galactosidase activity, extracellular polysaccharides release, bacterial respiration activity and the activity of triphenyl tetrazolium chloride (TTC) dehydrogenase were investigated to clarify the sterilization kinetics and mechanisms. Two flocculants play the different roles in the treatment. PAC plays role of coagulation, charge neutralization, but PDMDAAC with quaternary ammonium groups is responsible for flocculation to form big flocs, which further enhances its contact with E. coli and contributes to sterilization. Sterilization by flocculants is divided into two processes, rapidly adsorbing and slowly killing, since the respiratory activity of E. coli in flocs gradually decreases with increasing contact time. The increase of flocculant dosage overcomes the hindrance of the secretion of extracellular polysaccharide polymers originating from E. coli to coagulation and sterilization. Sterilization of flocculant should be fully considered in drinking water treatment. [ABSTRACT FROM AUTHOR]

• Dual-functional flocculant with pH resistant is synthesized and used to remove heavy metals. • Flocculation conditions for reaching high removal efficiencies are optimized. • Optimal operation modulus was identified using 8 Key performance indicators by 3E triangle model. • Multi-objective programming optimization model was also established to evaluate Operation strategies. • Flocculation for heavy metal removal is superior in terms of engineering performance. Carboxymethyl chitosan (CMCTS) with active hydroxyl and amino groups is easily modified for chelating and capturing heavy metal, thus showing great potential for application in heavy metal-contaminated wastewater treatment. In this work, a dual-functional MACA copolymer [CMCTS-graft-P(AM-TGA)] with pH resistant was successfully designed and prepared by grafting acrylamide and thioglycolic acid onto CMCTS through UV-initiated graft polymerization. The spectroscopy characterization of functional groups and apparent morphology confirm the successful preparation of MACA. Flocculation conditions for reaching high removal efficiencies and investigating chelation capacity are optimized. A multiobjective evaluation model and a triangular environmental impact, economic benefit, and energy consumption (3E) evaluation model were established and employed to assess the 3E performance of MACA in heavy metal-contaminated wastewater flocculation. Optimal operation modulus is identified using 8 Key performance indicators by 3E triangle model. This work enriches knowledge about flocculation and provides guidance for flocculation parameter control. [ABSTRACT FROM AUTHOR]