Search

• Nitrogenase-inspired MIL-53(FeII/FeIII) is first synthesized for N 2 photo fixation. • Mixed-valence FeII/FeIII clusters mimic the active center in nitrogenase. • FeII are in-situ formed by ethylene glycol reductant in solvothermal process. • FeII/FeIII ratio is vital to coordinate catalytic activity and framework stability. • MIL-53(FeII/FeIII) stably yields 306 μmol h−1 g−1 NH 3 under visible light. Biological nitrogenases exhibit superior nitrogen fixation efficiency owing to their unique multi-iron metallocluster (Fe2+ 3 Fe3+ 4 M3+, M = Mo, V, Fe) coordinated by organic polypeptide. Herein, we design a kind of metal organic framework (MOF) photocatalyst, MIL-53(FeII/FeIII) (MIL = Material from Institute Lavoisier), in which the FeII and FeIII constitute the mixed-valence metalloclusters to mimic the Fe2+ active sites and high-valence metal ions in nitrogenases, respectively. Both the FeII and FeIII are coordinated by organic ligands (terephthalic acid), which afford the electron transfer chains as well as the support of monodispersed FeII active sites. The FeIII in MIL-53(FeII/FeIII) is partly in-situ reduced into FeII by ethylene glycol (EG) via one-step solvothermal method, and the FeII/FeIII ratio is regulated from 0.18:1 to 1.21:1 by varying the EG content. Our results show that the FeII/FeIII ratio can significantly affect the photocatalytic activity and structure stability, and MIL-53(FeII/FeIII)-1 with optimal FeII/FeIII ratio (1.06:1) achieves the highest ammonia evolution rate up to 306 μmol h−1 g−1, nearly 10-fold higher than that of other framework-based materials, while remaining stable after 24 h irradiation. Such nitrogenase-like design in MIL-53(FeII/FeIII) endows the efficient electron transfer, exposed active sites, and in particular rational synergy between the catalytic function and non-catalytic function. This work may open a new avenue to the rational design of nitrogen fixation photocatalysts based on framework materials. [ABSTRACT FROM AUTHOR]

[Display omitted] • Tuning phases of MIL-100, MIL-110 and MIL-96 by applying formic acid as modulator. • Demonstrating the diversity of various ligands on node sites of MIL-110 and MIL-96. • Illustrating a highly flexible formate bonding site on Al 3 (OH) 3 unit of MIL-96. • Elucidating only a small fraction of node sites contributes to catalysis. Metal oxide cluster MOF nodes are a good platform to understand the reactivities and catalysis. MIL-96, MIL-100 and MIL-110 are drastically different in their node structures. Following our previous reported results for MIL-100, we report the modified synthesis and characterization of the node sites of MIL-110 and MIL-96 and their catalytic sites by using methanol dehydration as probe reaction. We show that these MOFs can be synthesized from the same solution by adding various amounts of formic acid as modulator. Herein, the chemistry of hydroxyl, formate and methoxy groups were used to probe the three MOFs' node sites. IR data show the bonding structures of these ligands are highly diverse, with reactivities and flexibilities depending on node sites. We identified terminal OH group and various µ 2 -OH groups in single, paired or hydrogen bonded modes on the MOF nodes. Formate ligands were introduced to the node sites during the synthesis or by a post treatment in formic acid/DMF solution. Surprisingly, the bonding modes of formate ligands on Al 3 (OH) 3 node structure of MIL-96 can be reversibly switched between monodentate and bidentate through a process induced by water molecules. Further, methoxy ligands—likely to be the intermediate for catalytic reaction—were also observed on the node sites under methanol dehydration conditions at 250 ℃. The activities of MIL-100 and MIL-96 for methanol dehydration determined by TOF per node were similar, both approximately 3-fold higher than that of MIL-110. The data suggests that catalytic sites incorporate adjacent vacancy and defect node sites, which constitute a minority among all observed MOF node sites. We foresee the opportunities in expanding the chemistry and understanding into other MOFs with metal oxide cluster nodes. [ABSTRACT FROM AUTHOR]

[Display omitted] • A multi-ligand strategy was proposed to design high-efficient MOF photocatalysts. • The three-ligand MOFs, EY/NH 2 /H-MIL-125, were synthesized to verify our strategy. • The optimal three-ligand MOF can yield H 2 of 2.15 mmol g−1 h−1 under visible light. • Electron transfer is enhanced by a push–pull effect induced by the NH 2 -H 2 BDC and H 2 BDC ligands. • The third ligand EY facilitates the electron photoexcitation under visible light. The design and construction of high-performance photocatalysts with both strong visible light harvesting and effective electron transfer are highly desired in the photocatalysis field. Herein, a multi-ligand strategy based on the MOF materials is proposed. A three-ligand Ti-MOF EY/NH 2 /H-MIL-125 (ENHM) was prepared via a facile hydrothermal method, in which 2-aminoterephthalic acid (NH 2 -H 2 BDC), terephthalic acid (H 2 BDC) and Eosin Y (EY) were employed as three ligands. The push–pull effect induced by different substituent groups (–NH 2 and –H) on the skeleton of NH 2 -H 2 BDC and H 2 BDC promotes the efficient transfer of photogenerated electrons from organic ligands to metal nodes; while the third ligand EY increases the number of photoexcited electrons by enhancing the visible light absorption ability. Among the three-ligand MOF photocatalytic materials, ENHM-2 performs the optimal H 2 production activity of 2.15 mmol g−1 h−1, much higher than dual-ligand NH 2 /H-MIL-125 and EY/NH 2 -MIL-125 and single-ligand NH 2 -MIL-125. A probable mechanism was also proposed for the three-ligand MOFs. This multi-ligand strategy may open up a new direction toward the preparation of MOF-based photocatalytic materials with excellent photocatalytic performances. [ABSTRACT FROM AUTHOR]

[Display omitted] • A metal doping strategy is proposed for N 2 activation. • Ca2+-doped UiO-66 is synthesized. • The Ca2+ doping fortifies the electron transfer from active sites to N 2. • The diamino ligand incorporating fortifies the electron generation and separation. • Photocatalytic NH 3 yield reaches 759.3 μmol h−1 g−1 under full spectrum. Photocatalytic NH 3 synthesis from N 2 is a clean and sustainable approach, however, the efficiency of this process is low due to the difficult activation of N N triple bonds. Herein, we propose a metal-doping strategy to facilitate the interfacial charge transfer for promoting the photocatalytic NH 3 yield. Ca2+ with low electronegativity was doped in UiO-66-NH 2 , a kind of Zr-based MOFs, to increase the electron donor capacity of Zr active sites. The X-ray photoelectron spectroscopy (XPS) spectra and density functional theory (DFT) calculations show that the Ca2+ doping enhances the electron density of Zr active sites. Moreover, the diamino ligand is incorporated to tune the bandgap structure of MOFs to expand its light absorption range. By adjusting the ratio of metals and organic ligands, the optimal photocatalyst UN(Zr-0.30Ca)-4 reaches a high NH 3 evolution rate of 759.3 μmol g−1 h−1 under full spectrum. This study may provide some inspiration for the design of advanced photocatalysts for diverse chemical reduction reactions. [ABSTRACT FROM AUTHOR]

[Display omitted] • Active site engineering in MOFs is first explored for photocatalytic N 2 fixation. • Acetic acid is added to expose and regulate the (1 0 0) facet with more active sites. • The FeIII/FeII ratio is controlled to improve active site reduction ability. • The photocatalytic NH 3 production rate of optimal MOFs reaches 164 μmol h−1 g−1. Photocatalytic ammonia synthesis from N 2 is a carbon neutral approach, its efficiency is yet impeded by the lack of abundant and efficient active sites on catalyst surface. Herein, we explore active site engineering strategy via employing MOF-235-based heterovalent metal organic frameworks (HMOFs) with FeIII/FeII clusters to break this dilemma. Acetic acid was added in solvothermal process, which was adsorbed on (1 0 1) facet of HMOF(FeIII/FeII) to restrain its further growth. The (1 0 0)/(1 0 1) facet ratio of HMOFs was regulated by the acetic acid content. Meanwhile, the FeIII/FeII ratio was regulated by the Fe3+/Fe2+ feeding ratio. It is found that the (1 0 0) facet of HMOFs exists more abundant Fe active sites, exposing (1 0 0) facet can increase the amount of active sites. On the other hand, the FeIII active site is favourable of N 2 adsorption, while the FeII active site is favourable for N 2 activation. The excellent balance between N 2 adsorption and N 2 activation can promote the reduction ability of active sites. At the optimal FeIII/FeII ratio of 1:1 and (1 0 0)/(1 0 1) facet ratio of 4.84, the photocatalytic activity of HMOF(FeIII/FeII)-10 reached 164 μmol g−1 h−1, more than 20 times compared to HMOF(FeIII/FeII)-0 without exposing the (1 0 0) facet. Our strategy may provide a reference in exploiting advanced photocatalysts based on organic framework-based materials. [ABSTRACT FROM AUTHOR]