Search

Pharmaceutical compounds are considered emerging environmental pollutants that have a potential harmful impact on environment and human health. In this study, the spiky green horse-chestnut shell was used for the biosorption and removal of acetaminophen from aqueous solution. It was analysed how the parameters, like contact time, pH, mass of biosorbent and temperature, influence the effectiveness of acetaminophen removal from aqueous solutions. The equilibrium was quickly achieved after 10 min (∼60%). The amount of acetaminophen adsorption slightly increased with the increase of the mass of biosorbent, and for example for an aqueous solution containing 10 mg/L of acetaminophen adsorption was increased from 62% to 81%. The promising results obtained at pH ranged between 2 and 9, which shows that the adsorption of acetaminophen did not depend on the pH and it may be a consequence of the predominant microporous sorbent and its surface charge. The result is better correlated to a pseudo-second-order kinetic model of type 2 (r2 = 0.9992) than pseudo-first-order. A sorption mechanism of acetaminophen on biosorbent was also proposed. The sorption of acetaminophen over biosorbent is mainly preceded by hydrophilic interactions between hydroxyl and carbonyl groups in pharmaceutical molecules and hydroxyl and carboxyl groups on the surface of biosorbent. [ABSTRACT FROM AUTHOR]

Very important in adsorption processes is the preparation of material sorbents and from this reason, the impact of washing agent of raw sorbent was analysed. The adsorption capacity was studied in relation to the function of the equilibrium time, the amount of biosorbent and the initial metal(II) ions concentration. In this research for the sake of comparison, the sorptive properties of out-of-date coffee were compared to coffee washed with different agents (mineral acids and water). The scanning electron microscopy and Fourier transform infrared spectroscopy were used to characterise the biosorbents and to identify the functional groups that participated in metal(II) ions bonding. The obtained results clearly indicate that the out-of-date coffee are effective biosorbent for cadmium(II) and nickel(II) ions from aqueous solution. However, for metal(II) ions removal efficiency could influence sorbent preparation and nickel(II) ions were best adsorbed on coffee washed with water, but cadmium(II) ions on raw biosorbent (out-of-date coffee). The best results of sorption were achieved after the contact time of 30 and 60 min, respectively for cadmium(II) and nickel(II) ions. [ABSTRACT FROM AUTHOR]

The adsorption of copper(II) ions from aqueous solutions by the green horse-chestnut shell was studied in a batch adsorption system. It was determined how the parameters of the adsorption process, such as time, pH, copper(II) ions concentration and sorbent dose, influence the effectiveness of copper(II) ions’ removal. The adsorption process was fast and equilibrium was established about 10 min, and near 95–97% of Cu(II) ions were removed from aqueous solution. Maximum copper(II) ions’ adsorption occurred at around pH 5. The adsorption kinetics are also described, using pseudo-first-order model and pseudo-second-order model of type 1 and 2. A comparison of the kinetics models on the overall adsorption rate showed that the adsorption system was best described by the pseudo-second-order model of type 1 (r2 = 0.999) for all initial concentrations. Another key part of this study was the use of the Freundlich model to determine the adsorption isotherm and the experimental data were in strong correspondence with this model. [ABSTRACT FROM PUBLISHER]