Search

The one-electron reduction of nitrous oxide (N 2 O) was achieved using strong Lewis acids E(C 6 F 5 ) 3 (E=B or Al) in combination with metallocenes. In the case of B(C 6 F 5 ) 3 , electron transfer to N 2 O required a powerful reducing agent such as Cp* 2 Co (Cp*=pentamethylcyclopentadienyl). In the presence of Al(C 6 F 5 ) 3 , on the other hand, the reactions could be performed with weaker reducing agents such as Cp* 2 Fe or Cp 2 Fe (Cp=cyclopentadienyl). The Lewis acid-mediated electron transfer from the metallocene to N 2 O resulted in cleavage of the N-O bond, generating N 2 and the oxyl radical anion [OE(C 6 F 5 ) 3 ] ⋅- . The latter is highly reactive and engages in C-H activation reactions. It was possible to trap the radical by addition of the Gomberg dimer, which acts as a source of the trityl radical., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The first heptacoordinate cobalt catalyst for light-driven hydrogen production in water has been synthesized and characterized. Photochemical experiments using [Ru(bpy) 3 ] 2+ as photosensitizer gave a turnover number (TON) of 16300 mol H 2  (mol cat.) -1 achieved in 2 hours of irradiation with visible (475 nm) light. This promising result provides a path forward in the development of new structures to improve the efficiency of the catalysis., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Multicomponent reactions between 1,4-benzenediboronic acid, catechol, and different pyridyl ligands are reported. The condensation of 1,4-benzenediboronic acid with catechol gives 1,4-bis(benzodioxaborole)benzene. Upon crystallization, the ester aggregates with the N-donor ligands through dative B-N bonds. Depending on the nature of the pyridyl ligand, molecularly defined macrocycles or polymeric structures are obtained. 1D polymers are formed with 4,4-bipyridine and 1,2-di(4-pyridyl)ethylene, whereas a 2D network is obtained with the tetradentate ligand tetra(4-pyridylphenyl)ethylene. These results highlight the utility of dative B-N bonds in structural supramolecular chemistry and crystal engineering., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Cyclopentadienyl-ruthenium half-sandwich complexes with eta(2)-bound alkyne ligands have been suggested as catalytic intermediates in the early stages of Ru-catalyzed reactions with alkynes. We show that electronically unsaturated complexes of the formula [RuCl(Cp--)(eta(2)-RC[triple bond]CR')] can be stabilized and crystallized by using the sterically demanding cyclopentadienyl ligand Cp-- (Cp--=eta(5)-1-methoxy-2,4-tert-butyl-3-neopentyl-cyclopentadienyl). Furthermore we demonstrate that [RuCl(2)(Cp==)](2) is an active and regioselective catalyst for the [2+2+2] cyclotrimerization of alkynes. The first elementary steps of the reaction of mono(eta(2)-alkyne) complexes containing {RuCl(Cp*)} (Cp*=eta(5)-C(5)Me(5)) and {RuCl(Cp--)} fragments with alkynes were investigated by DFT calculations at the M06/6-31G* level in combination with a continuum solvent model. Theoretical results are able to rationalize and complement the experimental findings. The presence of the sterically demanding Cp-- ligand increases the activation energy required for the formation of the corresponding di(eta(2)-alkyne) complexes, enhancing the initial regioselectivity, but avoiding the evolution of the system towards the expected cyclotrimerization product when bulky substituents are present. Theoretical results also show that the electronic structure and stability of a metallacyclic intermediate is strongly dependent on the nature of the substituents present in the alkyne.

This is the first coherent report on the metalation of calix[4]arene by alkali and alkaline-earth metals, thus providing a high-yield production of appropriate synthons for the synthesis of transition metal calix[4]arenes. In addition, various facets of the coordination chemistry by calix[4]arene anions of alkali and alkaline-earth metal ions have been singled out. Among them: 1) the exo and endo coordination of metal ions by the calix[4]arene skeleton; 2) the pi solvation of the ions by the phenyl rings; 3) the ion-carrier properties of metallacalix[4]arenes; 4) the simulation of the kinetically labile coordination sphere of alkali and alkaline-earth metal ions by a polyoxo rigid skeleton. The peculiarities of the complexation of alkali and alkaline-earth metal ions by calix[4]arenes outlined are deduced from the synthesis and the structural characterization both in solution ((1)H NMR) and in the solid state (X-ray structure analysis) of the following classes of compounds: 1) [p-tBu-calix[4](OMS(n))(4)](2) (M=Li, Na, K); 2) [p-tBu-calix[4](OR)(2)(O)(2)ML] (M=Mg, L=THF, R=C(5)H(9); M=Ca, L=TMEDA (tetramethylethylenediamine), R=C(5)H(9); M=Ca, L=DME (dimethoxyethane), R=C(5)H(9); M=Ba, L=TMEDA, R=C(5)H(9); M=Ba, L=none, R=C(5)H(9)); 3) [p-tBu-calix[4](OC(5)H(9))(2)(O)(2)Ca(2)I(2)(MeCN)(2)]; 4) [(p-tBu-calix[4](OR)(2)(O)(2))(2)BaNa(2)].

The reactivity of (E)- and (Z)-1-fluorobuta-1,3-diene ((E)- and (Z)-11), 2-fluorobutadiene (12), (E)- and (Z)-1-(fluoromethylidene)-2-methylidenecyclohexane ((E)- and (Z)-13) toward SO(2) has been explored and compared with that of (Z)- and (E)-1-(fluoromethylidene)-2-methylidene-3,4-dihydronaphthalene ((Z)-8 and (E)-8). In agreement with quantum calculations, 12 is unreactive toward SO(2) (no cycloaddition, only polymerization), whereas (E)-1-fluoro-1,3-dienes react more rapidly than their (Z)-isomers to give the corresponding 6-fluorosultines following the endo (Alder rule) mode of hetero-Diels-Alder addition. No sulfolene has been observed following the cheletropic mode of addition with the fluorodienes, in contrast to other substituted dienes. In agreement with the calculations, cis-2-fluoro-3,4-oxathiabenzobicyclo[4.4.0]dec-1(6),9-diene-4-oxide (cis-9, the sultine obtained by SO(2) addition to (Z)-8 under conditions of kinetic control) adopts a sofa conformation with the oxygen atom of the ring lying in the average plane of the four carbon atoms of its sultine moiety when it is in the crystalline state at -100 degrees C. A similar sofa conformation was found for its trans-isomer, trans-9, obtained by isomerization of cis-9 or by hetero-Diels-Alder addition of SO(2) to (E)-8. Experiments (equilibrium constant for hetero-Diels-Alder additions, bond lengths, and bond angles in crystalline fluorosultines cis-9 and trans-9) and high-level quantum calculations on cis- and trans-6-fluoro-3,6-dihydro-1,2-oxathiin-2-oxide (cis- and trans-20) confirm the existence of a stabilizing, enthalpic, anomeric (gem-disubstitution by sulfinyloxy and fluoro groups) effect, which is interpreted in terms of (lone pair) n(O1)-->sigma*(C-F) hyperconjugative interactions. This effect is strongest in the sofa conformers with a gauche arrangement of the sigma(O1,S2) and sigma(C6,F) bonds. The calculations suggest also that n(O1)-->sigma*(S2,O2'), pi*(S=O), and n(S2)-->sigma*(O1,C6) interactions intervene and affect the relative stability of the conformers (sofa, boat, pseudo-chair) found for 6-fluorosultines cis- and trans-20.

The reductive coupling of [M(salophen)] derivatives, where M is an early transition metal and salophen is N,N'-o-phenylenebis(salicylideneaminato) dianion, led to the formation of dimers linked through C-C and M-M bonds. Both of these bonds can potentially function as electron reservoirs: each bond can be used as a reversible source of a pair of electrons under the condition that it is not chemically transformed by the incoming substrate which functions as an electron acceptor. To explore this potential function as well as the competition in the redox processes between C-C and M-M bonds within the same molecular framework, we investigated the reduction of [(tBu4-salophen)NbCl3] (1) and [(tBu4-salophen)MoCl2] (7) as model compounds. In the former case, the reduction led to [(Nb-Nb)(tBu4-*salophen2*)] (2) which contains both a Nb-Nb bond (2.6528(7) A) and two C-C bonds across two imino groups of the ligand. Complex 2 can be reduced further to a transient compound 5 that contains an Nb=Nb bond. In the second case, the reduction of 7 by two electrons led to [(Mo[triplebond]Mo)(tBu4-salophen)2] (8), which does not contain any C-C linkages between the two salophen units. Complexes 2 and 5 are able to transfer one pair and two pairs of electrons, respectively, to give compounds 3, 4, and 6, with the consequent cleavage of the Nb-Nb and Nb=Nb bonds. In the present case, it is surprising that the C-C bonds do not participate in the reduction of the substrates. A careful theoretical treatment anticipates, both in the case of 1 and 7, the preferential formation of metal-metal bonds upon reduction. This is indeed the case for 7, but not for 1, where the formation of C-C bonds competes with that of M-M bonds, the latter being the first ones, however, to be involved in electron-transfer reactions. The theoretical approach allowed us to investigate the possibility of intramolecular electron transfer from C-C bonds to M-M bonds and vice versa.

The paper reports the synthesis of the first-row transition metal hexaethylporphodimethene derivatives [(Et6N4)M] [M=Mn, 3; M=Co, 5; M = Cu, 7] on a multigram scale, which makes them easily available for reactivity studies. After synthesis they were converted into the corresponding five-coordinate [(Et6,N4)M(L)] [M = Mn, L =THF, 8; M =Co, L = Py, 9] and six-coordinate [(Et6,N4)M(L)2] [M = Mn, L = THF, 10; M = Mn, L = Py, 11] derivatives. The compounds mentioned above and those recently reported, namely the iron and nickel derivatives 4, 6, 12, and 13, permit the presentation of the first coherent report on the structural, optical, magnetic, and electronic characteristics of the first-row transition metal porphodimethene derivatives. The experimental results, coupled with a detailed theoretical analysis (Density Functional Theory, DFT), give the appropriate background for future development of the porphodimethene skeleton, which paves the way from porphyrinogen to porphyrins. In addition, this report, encompassing the entire first row of transition metal ion porphodimethenes, allows a valuable comparison to be made with the corresponding metallated porphyrins, thus establishing the peculiar differences in terms of structural and electronic properties and potential reactivity.

A novel class of dinucleating ligands has been introduced into manganese chemistry to study the reactivity of this metal towards dioxygen under strictly controlled conditions. Such N4 ligands combine some of the major peculiarities of tetradentate Schiff bases and the porphyrin skeleton. They are derived from the condensation between 2-pyrrolaldehyde and ethylenediamine or o-phenylenediamine, leading to pyrenH2 (LH2, 1), pyrophenH2 (L'H2, 2) and Me2pyrophenH2, (L"H2, 3), respectively. Their metallation with [Mn3-(Mes)6] (Mes = 2,4,6-trimethylphenyl) led to [Mn2L2] (4), [MnL'(thf)2] (5) and [MnL"(thf)2] (6). Complex 4 displays a double-stranded helical structure, while 5 and 6 are mononuclear complexes containing hexacoordinated metals. Regardless of their structure, complexes 5 and 6 behave in a similar manner to 4 in their reaction with dioxygen, namely, as a dimetallic unit inside a cavity defined by two dinucleating ligands. These reactions led to dinuclear MnIII/MnIV oxo-hydroxo derivatives, [Mn2L2(mu-O)(mu-OH)] (7), [Mn2L'2(mu-O)(mu-OH)] (8) and [Mn2L"2(mu-O)(mu-OH)] (9), in which the two Mn ions are strongly antiferromagnetically coupled [J = -53 (7), J = -64 (8), J = -60 cm(-1) (9)]. The crystal structure of 7 could only be solved with synchrotron radiation as the crystals diffracted very poorly and suffered from twisting and disorder. The formation of 7-9 has been proposed to occur through the formation of an intermediate dinuclear hydroperoxo species.

The full metallation of meso-octaalkylporphyrinogens [R8N4H4] (R=Et, 1; nBu, 2; CH2Ph, 3; (CH2)4, 4) with heavy alkali metals (M = K, Rb, Cs) leads to the porphyrinogen-M4 compounds, in which the solvation of the alkali cations is largely assured by the intra- and intermolecular phi-interactions with the pyrrolyl anions. Such a mode of complexation results in a structural diversity as a function of the meso substituents, the size of the metal ion, and the solvent. The structure of the unsolvated polymers [R8N4M4]n (R= Et, M=K, 5; M=Rb, 6; M=Cs, 7; R= (CH2)4, M = Rb, 8; M = Cs, 9) have been clarified through the X-ray analysis of 7 recrystallized from diglyme. The structure shows that the tetraanion binds two Cs ions inside the cavity, which display in one case eta1:eta1:eta1:eta1 and in the other eta5:eta5:eta5:eta5 interaction modes. Bidimensional polymerization is assured by four Cs ions, which each bind at the eta5 position on the exo face of each pyrrole. With bulkier meso substituents, different polymeric forms are obtained (R = nBu, M = K, 10; M = Rb, 11; M = Cs, 12), and their structures were clarified through the X-ray analysis of 10, which was recrystallized from dimethoxyethane. The polymeric units are made up by the monomeric units [Bu8N4K2]2-, in which one potassium is eta1:eta1:eta1:eta5 and the other eta5:eta1:eta5:eta1 bonded inside the porphyrinogen cavity. In the case of R=CH2Ph, the monomeric anion [(PhCH2)8N4K2]2- (13) has been structurally identified. The metallation of 1 and 2 with active forms of alkaline earth metals (M' = Ca, Sr, Ba) led to dinuclear compounds [R,N4M'2] (R = Et, M' = Ca, 14; M'=Sr, 15; M'=Ba, 16; R=nBu. M'=Ba, 18), in which both metals inside the cavity are eta1:eta3:eta1:eta3 (Ca) and eta1:eta5:eta1:eta5 (Sr and Ba) bonded to the porphyrinogen tetraanion. The coordination sphere of each metal ion is completed by two THF molecules, which, in the case of Ba, are easily replaced by an arene ring [Bu8N4Ba2(eta6-arene)2] (arene=durene, 22; naphthalene, 23; toluene, 24; benzene, 25). The X-ray structures of 14, 15, 18, 22, and 23 are described in detail. We have tried to establish a relationship between the solid-state and solution structures by analyzing the 1H NMR spectra of the porphyrinogen complexes.

The availability of the parent compound, meso-hexaethylporphodimetheneiron(II), [(Et6N4)Fe] (2), of this report results from a novel synthetic methodology that makes [Et6N4Li2] (1) easily available. The major focus is on how the axial positions, which are the key reactive sites in metalloporphyrins, and the electronic configuration of the metal can be affected by the breakdown of the aromaticity of the porphyrin skeleton and by the nonplanar conformation of the ligand. DFT calculations indicate a 3B1(dz2)1(dyz)1 ground state for 2 versus the 3A2(dxz)1(dyz)1 ground state in the porphyrin analogue. The intermediate-spin state (S = 1) of 2 changed drastically upon addition of one or two axial ligands, as hexacoordination is preferred by iron(II). The hexacoordinate complexes [(Et6N4)Fe(L)(L')] (L = L' = THF, 3; L = L' = Py, 4; L = PhNO, L' = Py, 14) have been isolated and structurally characterized. Strong-field ligands lead to a low-spin diamagnetic state for iron(II), namely for complexes 4-7, 9, and 14, whereas 3 is a typical d6 high-spin complex, as is the pentacoordinate [(Et6N4)Fe(CN)]Bu4N (8). The structural analysis showed common features for 6, 7, 9, and 14: i) a small displacement of the metal from the N4 plane, and ii) an N4 cavity, larger than that in the corresponding porphyrins, affecting the Fe-N bond lengths. The 1H NMR spectrum is quite diagnostic of the two-fold symmetry in the diamagnetic hexacoordinate complexes, revealing either a D2h or a C2v symmetry. The CO stretching frequency (1951 cm(-1)) in complex 6 probes the good electron density at the metal. The one-electron oxidation of 2 led to pentacoordinate iron(III) derivatives [(Et6N4)Fe(Cl)] (10), [(Et6N4)2Fe2(mu-O)] (11), and [(Et6N4)2Fe2(mu-p-OC6H4-O)] (12). Complex 10 is a typical high-spin iron(III) (5.85muB at 298 K), while 11 and 12 behave as antiferromagnetic coupled iron(III) (J = -9.4cm(-1), 12, and J = -115cm(-1), 11). In complexes 10, 11, and 12 iron is sitting in a quite distorted square pyramidal geometry, in which the ligand displays a very distorted roof conformation with different degrees of ruffling. Distinctive structural and magnetic features have been found for the nitrosyl derivative [(Et6N4)Fe-NO], which has a low-spin state (S = 1/2) and the following structural parameters: Fe-N-O, 147.3(2) degrees; Fe-N, 1.708(2) A; N-O, 1.172(3) A. A comparative structural, magnetic, and theoretical analysis of the compounds listed above has been made with the analogous porphyrin derivatives. The detailed structural investigation has been mapped through the X-ray analysis of 2, 7, 8, 9, 11, 13, and 14.