Search

Electrochemical epoxidation of olefins using water as an oxygen atom source is emerging as an alternative approach for an atom economic and sustainable method towards a highly selective synthesis of epoxides. We report an electrochemical procedure for epoxidation of cyclooctene using water as the sole oxygen atom source over a sodium dodecyl sulfonate (SDS) modified nickel hydroxide Ni(OH) 2 catalyst directly grown on Ni foam. The SDS modification facilitates the mass transfer of cyclooctene towards the anode, thus achieving a 2.5-fold higher conversion with more than 90 % selectivity towards the corresponding epoxide compared with pure Ni(OH) 2 catalyst., (© 2024 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

The electrocatalytic activity for the oxygen evolution reaction in alkaline electrolyte of hexagonal spinel Co 3 O 4 nanoparticles derived using scanning electrochemical cell microscopy (SECCM) is correlated with scanning electron microscopy and atomic force microscopy images of the droplet landing sites. A unique way to deconvolute the intrinsic catalytic activity of individual crystal facets of the hexagonal Co 3 O 4 spinel particle is demonstrated in terms of the turnover frequency (TOF) of surface Co atoms. The top surface exposing 111 crystal planes displayed a thickness-dependent TOF with a TOF of about 100 s -1 at a potential of 1.8 V vs. RHE and a particle thickness of 100 nm. The edge of the particle exposing (110) planes, however, showed an average TOF of 270±68 s -1 at 1.8 V vs. RHE and no correlation with particle thickness. The higher atomic density of Co atoms on the edge surface (2.5 times of the top) renders the overall catalytic activity of the edge planes significantly higher than that of the top planes. The use of a free-diffusing Os complex in the alkaline electrolyte revealed the low electrical conductivity through individual particles, which explains the thickness-dependent TOF of the top planes and could be a reason for the low activity of the top (111) planes., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Invited for the cover of this issue are Felipe Conzuelo, Wolfgang Schuhmann, and co-workers at the Ruhr University Bochum. The image depicts the electrochemical conversion of glycerol and 5-(hydroxymethyl)furfural with an electrode made up of galactose oxidase electrically wired with a redox polymer. Read the full text of the article at 10.1002/chem.202200868., (© 2022 Wiley-VCH GmbH.)

The use of enzymes as catalysts in chemical synthesis offers advantages in terms of clean and highly selective transformations. Galactose oxidase (GalOx) is a remarkable enzyme with several applications in industrial conversions as it catalyzes the oxidation of primary alcohols. We have investigated the wiring of GalOx with a redox polymer; this enables mediated electron transfer with the electrode surface for its potential application in biotechnological conversions. As a result of electrochemical regeneration of the catalytic center, the formation of harmful H 2 O 2 is minimized during enzymatic catalysis. The introduced bioelectrode was applied to the conversion of bio-renewable platform materials, with glycerol as model substrate. The biocatalytic transformations of glycerol and 5-hydroxymethylfurfural (HMF) were investigated in a circular flow-through setup to assess the possibility of substrate over-oxidation, which is observed for glycerol oxidation but not during HMF conversion., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Bimetallic tandem catalysts have emerged as a promising strategy to locally increase the CO flux during electrochemical CO 2 reduction, so as to maximize the rate of conversion to C-C-coupled products. Considering this, a novel Cu/C-Ag nanostructured catalyst has been prepared by a redox replacement process, in which the ratio of the two metals can be tuned by the replacement time. An optimum Cu/Ag composition with similarly sized particles showed the highest CO 2 conversion to C 2+ products compared to non-Ag-modified gas-diffusion electrodes. Gas chromatography and in-situ Raman measurements in a CO 2 gas diffusion cell suggest the formation of top-bound linear adsorbed *CO followed by consumption of CO in the successive cascade steps, as evidenced by the increasingνC-H bands. These findings suggest that two mechanisms operate simultaneously towards the production of HCO 2 H and C-C-coupled products on the Cu/Ag bimetallic surface., (© 2022 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

By using the crystalline precursor decomposition approach and direct co-precipitation the composition and mesostructure of cobalt-based spinels can be controlled. A systematic substitution of cobalt with redox-active iron and redox-inactive magnesium and aluminum in a cobalt spinel with anisotropic particle morphology with a preferred 111 surface termination is presented, resulting in a substitution series including Co 3 O 4 , MgCo 2 O 4 , Co 2 FeO 4 , Co 2 AlO 4 and CoFe 2 O 4 . The role of redox pairs in the spinels is investigated in chemical water oxidation by using ceric ammonium nitrate (CAN test), electrochemical oxygen evolution reaction (OER) and H 2 O 2 decomposition. Studying the effect of dominant surface termination, isotropic Co 3 O 4 and CoFe 2 O 4 catalysts with more or less spherical particles are compared to their anisotropic analogues. For CAN-test and OER, Co 3+ plays the major role for high activity. In H 2 O 2 decomposition, Co 2+ reveals itself to be of major importance. Redox active cations in the structure enhance the catalytic activity in all reactions. A benefit of a predominant 111 surface termination depends on the cobalt oxidation state in the as-prepared catalysts and the investigated reaction., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

In a combined experimental and theoretical study we assess the role of Co incorporation on the OER activity of LaCo x Fe 1-x O 3 . Phase pure perovskites were synthesized up to x = 0 . 300 in 0.025/0.050 steps. HAADF STEM and EDX analysis points towards FeO 2 -terminated (001)-facets in LaFeO 3 , in accordance with the stability diagram obtained from density functional theory calculations with a Hubbard U term (DFT+U). Linear sweep voltammetry conducted in a rotating disk electrode setup shows a reduction of the OER overpotential and a nonmonotonic trend with x, with double layer capacitance measurements indicating an intrinsic nature of activity. This is supported by DFT+U results that show reduced overpotentials for both Fe and Co reaction sites with the latter reaching values of 0.32-0.40 V, ∼0.3 V lower than for Fe. This correlates with a stronger reduction of the binding energy difference of the *O and *OH intermediates towards an optimum value of 1.6 eV for x = 0 . 250 , the OH deprotonation being the potential limiting step in most cases. Significant variations of the magnetic moments of both surface and subsurface Co and Fe during OER demonstrate that the beneficial effect is a result of a concerted action involving many surrounding ions, which extends the concept of the active site., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Discerning the influence of electrochemical reactions on the electrode microenvironment is an unavoidable topic for electrochemical reactions that involve the production of OH - and the consumption of water. That is particularly true for the carbon dioxide reduction reaction (CO 2 RR), which together with the competing hydrogen evolution reaction (HER) exert changes in the local OH - and H 2 O activity that in turn can possibly affect activity, stability, and selectivity of the CO 2 RR. We determine the local OH - and H 2 O activity in close proximity to a CO 2 -converting Ag-based gas diffusion electrode (GDE) with product analysis using gas chromatography. A Pt nanosensor is positioned in the vicinity of the working GDE using shear-force-based scanning electrochemical microscopy (SECM) approach curves, which allows monitoring changes invoked by reactions proceeding within an otherwise inaccessible porous GDE by potentiodynamic measurements at the Pt-tip nanosensor. We show that high turnover HER/CO 2 RR at a GDE lead to modulations of the alkalinity of the local electrolyte, that resemble a 16 m KOH solution, variations that are in turn linked to the reaction selectivity., (© 2021 The Authors. Published by Wiley-VCH GmbH.)

Producing stable but active materials is one of the enduring challenges in electrocatalysis and other types of catalysis. Producing branched nanoparticles is one potential solution. Controlling the number of branches and branch size of faceted branched nanoparticles is one of the major synthetic challenges to achieve highly active and stable nanocatalysts. Herein, we use a cubic-core hexagonal-branch mechanism to synthesize branched Ru nanoparticles with control over the size and number of branches. This structural control is the key to achieving high exposure of active {10-11} facets and optimum number of Ru branches that enables improved catalytic activity for oxygen evolution reaction while maintaining high stability., (© 2020 Wiley-VCH GmbH.)

Cryptomelane (α-(K)MnO 2 ) powders were synthesized by different methods leading to only slight differences in their bulk crystal structure and chemical composition, while the BET surface area and the crystallite size differed significantly. Their performance in the oxygen evolution reaction (OER) covered a wide range and their sequence of increasing activity differed when electrocatalysis in alkaline electrolyte and chemical water oxidation using Ce 4+ were compared. The decisive factors that explain this difference were identified in the catalysts' microstructure. Chemical water oxidation activity is substantially governed by the exposed surface area, while the electrocatalytic activity is determined largely by the electric conductivity, which was found to correlate with the particle morphology in terms of needle length and aspect ratio in this sample series. This correlation is rather explained by an improved conductivity due to longer needles than by structure sensitivity as was supported by reference experiments using H 2 O 2 decomposition and carbon black as additive. The most active catalyst R-cryptomelane reached a current density of 10 mA cm -2 at a potential 1.73 V without, and at 1.71 V in the presence of carbon black. The improvement was significantly higher for the catalyst with lower initial activity. However, the materials showed a disappointing catalytic stability during alkaline electrochemical OER, whereas the crystal structure was found to be stable at working conditions., (© 2020 The Authors. Published by Wiley-VCH GmbH.)

Svante Augustus Arrhenius (1859, Vik - 1927, Stockholm) received the Nobel Prize for Chemistry in 1903 "in recognition of the extraordinary services he rendered to the advancement of chemistry by his electrolytic theory of dissociation". Arrhenius was a physicist, and he received his PhD from the University of Uppsala, where he later became a professor for phyiscal chemistry, the first in the country for this subject. He was offered several positions as professor abroad, but decided to remain in Sweden and to build a Nobel Institute for physical chemistry using the Nobel funds. He remained director of the Institute until his death. There are powerful lessons to take from Svante August Arrhenius' journey leading to a Nobel laureate as there are from his tremendous contributions to chemistry and science in general, including climate science, immunochemistry and cosmology. The theory of electrolytic dissociation for which Arrhenius received the 1903 Nobel Prize in Chemistry has had a profound impact on our understanding of the chemistry of solutions, chemical reactivity, mechanisms underlying chemical transformations as well as physiological processes. As a tribute to Arrhenius, we present a brief historical perspective and present status of the theory of electrolytic dissociation, its relevance and role to the development of electrochemistry, as well as some perspectives on the possible role of the theory to future advancements in electroanalysis, electrocatalysis and electrochemical energy storage. The review briefly highlights Arrhenius' contribution to climate science owing to his studies on the potential effects of increased anthropogenic CO 2 emissions on the global climate. These studies were far ahead of their time and revealed a daunting global dilemma, global warming, that we are faced with today. Efforts to abate or reverse CO 2 accumulation constitute one of the most pressing scientific problems of our time, "man's urgent strive to save self from the adverse effects of his self-orchestrated change on the climate". Finally, we review the application of the Arrhenius equation that correlates reaction rate constants (k) and temperature (T); k = A e ( - E a / R T ) , in determining reaction barriers in catalysis with a particular focus on recent modifications of the equation to account for reactions exhibiting non-linear Arrhenius behavior with concave curvature due to prevalence of quantum mechanical tunneling, as well as infrequent convexity of Arrhenius plots due to decrease of the microcanonical rate coefficient with energy as observed for some enzyme catalyzed reactions., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

NiFe layered double hydroxide (LDH) is inarguably the most active contemporary catalyst for the oxygen evolution reaction under alkaline conditions. However, the ability to sustain unattenuated performance under challenging industrial conditions entailing high corrosivity of the electrolyte (≈30 wt. % KOH), high temperature (>80 °C) and high current densities (>500 mA cm -2 ) is the ultimate criterion for practical viability. This work evaluates the chemical and structural stability of NiFe LDH at conditions akin to practical electrolysis, in 30 % KOH at 80 °C, however, without electrochemical polarization, and the resulting impact on the OER performance of the catalyst. Post-analysis of the catalyst by means of XRD, TEM, FT-IR, and Raman spectroscopy after its immersion into 7.5 m KOH at 80 °C for 60 h revealed a transformation of the structure from NiFe LDH to a mixture of crystalline β-Ni(OH) 2 and discrete predominantly amorphous FeOOH containing minor non-homogeneously distributed crystalline domains. These structural and compositional changes led to a drastic loss of the OER activity. It is therefore recommended to study catalyst stability at industrially relevant conditions., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Mössbauerite is investigated for the first time as an "iron-only" mineral for the electrocatalytic oxygen evolution reaction in alkaline media. The synthesis proceeds via intermediate mixed-valence green rust that is rapidly oxidized in situ while conserving the layered double hydroxide structure. The material catalyzes the oxygen evolution reaction on a glassy carbon electrode with a current density of 10 mA cm -2 at 1.63 V versus the reversible hydrogen electrode. Stability measurements, as well as post-electrolysis characterization are presented. This work demonstrates the applicability of iron-only layered double hydroxides as earth-abundant oxygen evolution electrocatalysts. Mössbauerite is of fundamental importance since as an all Fe 3+ material its performance has no contributions from unknown synergistic effects as encountered for mixed valence Co/Ni/Fe LDH., (© 2018 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

There has been growing interest in the synthesis of efficient reversible oxygen electrodes for both the oxygen reduction reaction (ORR) and the oxygen evolution reactions (OER), for their potential use in a variety of renewable energy technologies, such as regenerative fuel cells and metal-air batteries. Here, a bi-functional electrocatalyst, derived from a novel dicyanamide based nitrogen rich MOF {[Co(bpe) 2 (N(CN) 2 )]⋅(N(CN) 2 )⋅(5 H 2 O)} n [Co-MOF-1, bpe=1,2-bis(4-pyridyl)ethane, N(CN) 2 - =dicyanamide] under different pyrolysis conditions is reported. Pyrolysis of the Co-MOF-1 under Ar atmosphere (at 800 °C) yielded a Co nanoparticle-embedded N-doped carbon nanotube matrix (Co/NCNT-Ar) while pyrolysis under a reductive H 2 /Ar atmosphere (at 800 °C) and further mild calcination yielded Co 3 O 4 @Co core-shell nanoparticle-encapsulated N-doped carbon nanotubes (Co 3 O 4 @Co/NCNT). Both catalysts show bi-functional activity towards ORR and OER, however, the core-shell Co 3 O 4 @Co/NCNT nanostructure exhibited superior electrocatalytic activity for both the ORR with a potential of 0.88 V at a current density of -1 mA cm -2 and the OER with a potential of 1.61 V at 10 mA cm -2 , which is competitive with the most active bi-functional catalysts reported previously., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Monocrystalline, yet porous mosaic platelets of cobalt ferrite, CoFe 2 O 4 , can be synthesized from a layered double hydroxide (LDH) precursor by thermal decomposition. Using an equimolar mixture of Fe 2+ , Co 2+ , and Fe 3+ during co-precipitation, a mixture of LDH, (Fe II Co II ) 2/3 Fe III 1/3 (OH) 2 (CO 3 ) 1/6 ⋅m H 2 O, and the target spinel CoFe 2 O 4 can be obtained in the precursor. During calcination, the remaining Fe II fraction of the LDH is oxidized to Fe III leading to an overall Co 2+ :Fe 3+ ratio of 1:2 as required for spinel crystallization. This pre-adjustment of the spinel composition in the LDH precursor suggests a topotactic crystallization of cobalt ferrite and yields phase pure spinel in unusual anisotropic platelet morphology. The preferred topotactic relationship in most particles is [111] Spinel ∥[001] LDH . Due to the anion decomposition, holes are formed throughout the quasi monocrystalline platelets. This synthesis approach can be used for different ferrites and the unique microstructure leads to unusual chemical properties as shown by the application of the ex-LDH cobalt ferrite as catalyst in the selective oxidation of 2-propanol. Compared to commercial cobalt ferrite, which mainly catalyzes the oxidative dehydrogenation to acetone, the main reaction over the novel ex-LDH cobalt is dehydration to propene. Moreover, the oxygen evolution reaction (OER) activity of the ex-LDH catalyst was markedly higher compared to the commercial material., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Developing high-performance non-precious metal catalysts (NPMCs) for the oxygen-reduction reaction (ORR) is of critical importance for sustainable energy conversion. We report a novel NPMC consisting of iron carbide (Fe 3 C) nanoparticles encapsulated in N-doped bamboo-like carbon nanotubes (b-NCNTs), synthesized by a new metal-organic framework (MOF)-templated assembly approach. The electrocatalyst exhibits excellent ORR activity in 0.1 m KOH (0.89 V at -1 mA cm -2 ) and in 0.5 m H 2 SO 4 (0.73 V at -1 mA cm -2 ) with a hydrogen peroxide yield of below 1 % in both electrolytes. Due to encapsulation of the Fe 3 C nanoparticles inside porous b-NCNTs, the reported NPMC retains its high ORR activity after around 70 hours in both alkaline and acidic media., (© 2017 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Multistep synthesis and electrochemical characterization of an Os complex-modified redox hydrogel exhibiting a redox potential ≈+30 mV (vs. Ag/AgCl 3 M KCl) is demonstrated. The careful selection of bipyridine-based ligands bearing N,N-dimethylamino moieties and an amino-linker for the covalent attachment to the polymer backbone ensures the formation of a stable redox polymer with an envisaged redox potential close to 0 V. Most importantly, the formation of an octahedral N6-coordination sphere around the Os central atoms provides improved stability concomitantly with the low formal potential, a low reorganization energy during the Os(3+/2+) redox conversion and a negligible impact on oxygen reduction. By wiring a variety of enzymes such as pyrroloquinoline quinone (PQQ)-dependent glucose dehydrogenase, flavin adenine dinucleotide (FAD)-dependent glucose dehydrogenase and the FAD-dependent dehydrogenase domain of cellobiose dehydrogenase, low-potential glucose biosensors could be obtained with negligible co-oxidation of common interfering compounds such as uric acid or ascorbic acid. In combination with a bilirubin oxidase-based biocathode, enzymatic biofuel cells with open-circuit voltages of up to 0.54 V were obtained., (© 2016 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Nanostructure engineering has been demonstrated to improve the electrochemical performance of iron oxide based electrodes in Li-ion batteries (LIBs). However, the synthesis of advanced functional materials often requires multiple steps. Herein, we present a facile one-pot synthesis of carbon-coated nanostructured iron oxide on few-layer graphene through high-pressure pyrolysis of ferrocene in the presence of pristine graphene. The ferrocene precursor supplies both iron and carbon to form the carbon-coated iron oxide, while the graphene acts as a high-surface-area anchor to achieve small metal oxide nanoparticles. When evaluated as a negative-electrode material for LIBs, our composite showed improved electrochemical performance compared to commercial iron oxide nanopowders, especially at fast charge/discharge rates., (© 2015 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Photosystem 1 (PS1) triggers the most energetic light-induced charge-separation step in nature and the in vivo electron-transfer rates approach 50 e(-)  s(-1)  PS1(-1). Photoelectrochemical devices based on this building block have to date underperformed with respect to their semiconductor counterparts or to natural photosynthesis in terms of electron-transfer rates. We present a rational design of a redox hydrogel film to contact PS1 to an electrode for photocurrent generation. We exploit the pH-dependent properties of a poly(vinyl)imidazole Os(bispyridine)2Cl polymer to tune the redox hydrogel film for maximum electron-transfer rates under optimal conditions for PS1 activity. The PS1-containing redox hydrogel film displays electron-transfer rates of up to 335±14 e(-)  s(-1)  PS1(-1), which considerably exceeds the rates observed in natural photosynthesis or in other semiartificial systems. Under O2 supersaturation, photocurrents of 322±19 μA cm(-2) were achieved. The photocurrents are only limited by mass transport of the terminal electron acceptor (O2). This implies that even higher electron-transfer rates may be achieved with PS1-based systems in general., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Modified acrylate polymers are able to effectively exfoliate and stabilize pristine graphene nanosheets in aqueous media. Starting with pre-exfoliated graphite greatly promotes the exfoliation level. The graphene concentration is significantly increased up to 11 mg mL(-1) by vacuum evaporation of the solvent from the dispersions under ambient temperature. TEM shows that 75 % of the flakes have fewer than five layers with about 18 % of the flakes consisting of monolayers. Importantly, a successive centrifugation and redispersion strategy is developed to enable the formation of dispersions with exceptionally high graphene-to-stabilizer ratio. Characterization by high-resolution transmission electron microscopy, X-ray photoelectron spectroscopy, X-ray diffraction, and Raman spectroscopy shows the flakes to be of high quality with very low levels of defects. These dispersions can act as a scaffold for the immobilization of enzymes applied, for example, in glucose oxidation. The electrochemical current density was significantly enhanced to be approximately six times higher than an electrode in the absence of graphene, thus showing potential applications in enzymatic biofuel cells., (© 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

We report a simple and template-free strategy for the synthesis of hollow and yolk-shell iron oxide (FeOx) nanostructures sandwiched between few-layer graphene (FLG) sheets. The morphology and microstructure of this material are characterized in detail by X-ray diffraction, X-ray absorption near-edge structure, X-ray photoelectron spectroscopy, Raman spectroscopy, scanning and transmission electron microscopy. Its properties are evaluated as negative electrode material for Li-ion batteries and compared with those of solid FeOx/FLG and two commercial iron oxides. In all cases, the content of carbon in the electrode has a great influence on the performance. The use of pristine FLG improves the capacity retention and further enhancement is achieved with the hollow structure. For a low carbon loading of 18 wt. %, the presence of metallic iron in the hollow and yolk-shell FeOx/FLG composite significantly enhances the capacity retention, albeit with a relatively lower initial reversible capacity, retaining above 97% after 120 cycles at 1000 mA g(-1) in the voltage range of 0.1-3.0 V., (Copyright © 2014 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Improving the chemical diffusion of Li ions in anatase TiO2 is essential to enhance its rate capability as a negative electrode for Li-ion batteries. Ammonia annealing has been used to improve the rate capability of Li4 Ti5 O12 . Similarly, ammonia annealing improves the Li-ion storage performance of anatase TiO2 in terms of the stability upon cycling and the C-rate capability. In order to distinguish whether N doping or oxygen deficiencies, both introduced upon ammonia annealing, are more relevant for the observed improvement, a systematic electrochemical study was performed. The results suggest that the creation of oxygen vacancies upon ammonia annealing is the main reason for the improvement of the stability and C-rate capability., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

Incisive modulation of the intermolecular hardness between metalloporphyrins and O2 can lead to the identification of promising catalysts for oxygen reduction. The dependency of the electrocatalytic reduction of O2 by metalloporphyrins on the nature of the central metal yields a volcano-type curve, which is rationalized to be in accordance with the Sabatier principle by using an approximation of the electrophilicity of the complexes. By using electrochemical and UV/Vis data, the influence of a selection of meso-substituents on the change in the energy for the π→π* excitation of manganese porphyrins was evaluated allowing one to quantitatively correlate the influence of the various ligands on the electrocatalysis of O2 reduction by the complexes. A manganese porphyrin was identified that electrocatalyzes the reduction of oxygen at low overpotentials without generating hydrogen peroxide. The activity of the complex became remarkably enhanced upon its pyrolysis at 650 °C., (Copyright © 2013 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

A high-yielding exfoliation of graphene at high concentrations in aqueous solutions is critical for both fundamental study and future applications. Herein, we demonstrate the formation of stable aqueous dispersions of pristine graphene by using the surfactant sodium taurodeoxycholate under tip sonication at concentrations of up to 7.1 mg mL(-1). TEM showed that about 8% of the graphene flakes consisted of monolayers and 82% of the flakes consisted of less than five layers. The dispersions were stable regardless of freezing (-20 °C) or heat treatment (80 °C) for 24 h. The concentration could be significantly improved to about 12 mg mL(-1) by vacuum-evaporation of the dispersions at ambient temperature. The as-prepared graphene dispersions were readily cast into conductive films and were also processed to prepare Pt/graphene nanocomposites that were used as highly active electrocatalysts for the oxygen-reduction reaction., (Copyright © 2012 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

N-Terminally ferrocenylated and C-terminally gold-surface-grafted peptide nucleic acid (PNA) strands were exploited as unique tools for the electrochemical investigation of the strand dynamics of short PNA(⋅DNA) duplexes. On the basis of the quantitative analysis of the kinetics and the diffusional characteristics of the electron-transfer process, a nanoscopic view of the Fc-PNA(⋅DNA) surface dynamics was obtained. Loosely packed, surface-confined Fc-PNA single strands were found to render the charge-transfer process of the tethered Fc moiety diffusion-limited, whereas surfaces modified with Fc-PNA⋅DNA duplexes exhibited a charge-transfer process with characteristics between the two extremes of diffusion and surface limitation. The interplay between the inherent strand elasticity and effects exerted by the electric field are supposed to dictate the probability of a sufficient approach of the Fc head group to the electrode surface, as reflected in the measured values of the electron-transfer rate constant, k(0). An in-depth understanding of the dynamics of surface-bound PNA and PNA⋅DNA strands is of utmost importance for the development of DNA biosensors using (Fc-)PNA recognition layers., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The suitability of frequency-dependent alternating-current scanning electrochemical microscopy (4D AC-SECM) for investigation of thin passivating layers covering the surface of corrosion-inhibited metals has been demonstrated. Inhibition of copper corrosion by benzotriazole (BTAH) and methylbenzotriazole (MBTAH), which are effective inhibitors for this metal under many environmental conditions, was investigated. Strong dependencies were found for the AC z-approach curves with both the duration of the inhibitor treatment and the frequency of the AC excitation signal applied in AC-SECM. Both negative and positive feedback behaviours were observed in the AC approach curves for untreated copper and for Cu/BTAH and Cu/MBTAH samples. Negative feedback behaviour occurred in the low-frequency range, whereas a positive feedback effect was observed at higher frequencies. A threshold frequency related to the passage from negative to positive regimes could be determined in each case. The threshold frequency for inhibitor-modified samples was found always to be significantly higher than for the untreated metal, because the inhibitor film provides electrical insulation for the surface. Moreover, the threshold frequency increased with increasing surface coverage by the inhibitor. 4D AC-SECM was successfully applied to visualizing spatially resolved differences in local electrochemical activity between inhibitor-free and inhibitor-covered areas of the sample., (Copyright © 2011 WILEY-VCH Verlag GmbH & Co. KGaA, Weinheim.)

For a better understanding of the initiation of localised corrosion, there is a need for analytical tools that are capable of imaging corrosion pits and precursor sites with high spatial resolution and sensitivity. The lateral electrochemical contrast in alternating-current scanning electrochemical microscopy (AC-SECM) has been found to be highly dependent on the frequency of the applied alternating voltage. In order to be able to obtain data with optimum contrast and high resolution, the AC frequency is swept in a full spectrum at each point in space instead of performing spatially resolved measurements at one fixed perturbation frequency. In doing so, four-dimensional data sets are acquired (4D AC-SECM). Here, we describe the instrument set-up and modus operandi, along with the first results from the imaging of corroding surfaces. Corrosion precursor sites and local defects in protective organic coatings, as well as an actively corroding pit on 304 stainless steel, have been successfully visualised. Since the lateral electrochemical contrast in these images varies with the perturbation frequency, the proposed approach constitutes an indispensable tool for obtaining optimum electrochemical contrast.

A non-optical shear-force-based detection scheme for accurately controlling the tip-to-sample distance in scanning electrochemical microscopy (SECM) is presented. With this approach, the detection of the shear force is accomplished by mechanically attaching a set of two piezoelectric plates to the scanning probe. One of the plates is used to excite the SECM tip causing it to resonate, and the other acts as a piezoelectric detector of the amplitude of the tip oscillation. Increasing shear forces in close proximity to the sample surface lead to a damping of the vibration amplitude and a phase shift, effects that are registered by connecting the detecting piezoelectric plate to a dual-phase analogue lock-in amplifier. The shear force and hence distance-dependent signal of the lock-in amplifier is used to establish an efficient, computer-controlled closed feedback loop enabling SECM imaging in a constant-distance mode of operation. The details of the SECM setup with an integrated piezoelectric shear-force distance control are described, and approach curves are shown. The performance of the constant-distance mode SECM with a non-optical detection of shear forces is illustrated by imaging simultaneously the topography and conductivity of an array of Pt-band microelectrodes.

In scanning electrochemical microscopy (SECM) a microelectrode is usually scanned over a sample without following topographic changes (constant-height mode). Therefore, deconvolution of effects from distance variations arising from non-flat sample surface and electrochemical surface properties is in general not possible. Using a shear force-based constant distance mode, information about the morphology of a sample and its localized electrochemical activity can be obtained simultaneously. The setup of the SECM with integrated constant-distance mode and its application to non-flat or tilted surfaces, as well as samples with three-dimensional surface structures are presented and discussed. The facilitated use of non-amperometric tips in SECM like enzyme-filled glass capillaries is demonstrated.

Horseradish peroxidase (HRP) was reconstituted on the surface of a gold electrode that was modified first with a hemin-carbon-chain-thiol derivative followed by addition of the apo protein to the contacting solution. To facilitate the reconstitution of the holo enzyme, the hemin needs to be immobilised on a carbon-chain spacer arm. To achieve this, an immobilisation protocol was developed that is based on the initial formation of a mixed self-assembled monolayer on the gold surface consisting of 3-carboxypropyl disulphide and an activated disulphide (3,3'-dithiodipropionic acid di-(N-succinimidyl ester)) followed by binding of a diaminoalkane to the activated disulphide. The hemin was then coupled to the second amino group of the diaminoalkane by means of a carbodiimide coupling reagent. Finally, the enzyme was reconstituted on the hemin-modified surface by immersion of the electrode in a solution containing apo-HRP. The advantage of this method is that the length of the spacer arm can be changed easily, because diaminoalkanes of different chain lengths are available. The electrochemistry of the hemin and the reconstituted HRP electrodes was studied by means of cyclic voltammetry and differential-pulse voltammetry. The catalytic ability for reduction of hydrogen peroxide was investigated for both direct and mediated electrochemistry with a soluble electron donor (ortho-phenylenediamine).