Search

Here, the combination of theoretical computations followed by rapid experimental screening and in situ diffraction studies is demonstrated as a powerful strategy for novel compounds discovery. When applied for the previously "empty" Na-Zn-Bi system, such an approach led to four novel phases. The compositional space of this system was rapidly screened via the hydride route method and the theoretically predicted NaZnBi (PbClF type, P4/nmm) and Na 11 Zn 2 Bi 5 (Na 11 Cd 2 Sb 5 type, P 1 ‾ ) phases were successfully synthesized, while other computationally generated compounds on the list were rejected. In addition, single crystal X-ray diffraction studies of NaZnBi indicate minor deviations from the stoichiometric 1 : 1 : 1 molar ratio. As a result, two isostructural (PbClF type, P4/nmm) Zn-deficient phases with similar compositions, but distinctly different unit cell parameters were discovered. The vacancies on Zn sites and unit cell expansion were rationalized from bonding analysis using electronic structure calculations on stoichiometric "NaZnBi". In-situ synchrotron powder X-ray diffraction studies shed light on complex equilibria in the Na-Zn-Bi system at elevated temperatures. In particular, the high-temperature polymorph HT-Na 3 Bi (BiF 3 type, Fm 3 ‾ m) was obtained as a product of Na 11 Zn 2 Bi 5 decomposition above 611 K. HT-Na 3 Bi cannot be stabilized at room temperature by quenching, and this type of structure was earlier observed in the high-pressure polymorph HP-Na 3 Bi above 0.5 GPa. The aforementioned approach of predictive synthesis can be extended to other multinary systems., (© 2021 The Authors. Chemistry - A European Journal published by Wiley-VCH GmbH.)

Ternary lithium nickel borides LiNi 3 B 1.8 and Li 2.8 Ni 16 B 8 have been synthesized by using reactive LiH as a precursor. This synthetic route allows better mixing of the precursor powders, thus facilitating rapid preparation of the alkali-metal-containing ternary borides. This method is suitable for "fast screening" of multicomponent systems comprised of elements with drastically different reactivities. The crystal structures of the compounds LiNi 3 B 1.8 and Li 2.8 Ni 16 B 8 have been re-investigated by a combination of single-crystal X-ray/synchrotron powder diffraction, solid-state 7 Li and 11 B NMR spectroscopies, and scanning transmission electron microscopy. This has allowed the determination of fine structural details, including the split position of Ni sites and the ordering of B vacancies. Field-dependent and temperature-dependent magnetization measurements are consistent with spin-glass behavior for both samples., (© 2019 Wiley-VCH Verlag GmbH & Co. KGaA, Weinheim.)

The creation of thermoelectric materials for waste heat recovery and direct solar energy conversion is a challenge that forces the development of compounds that combine appreciable thermoelectric figure-of-merit with high thermal and chemical stability. Here we propose a new candidate for high-temperature thermoelectric materials, the type-III Si(172-x)P(x)Te(y) cationic clathrate, in which the framework is composed of partially ordered silicon and phosphorus atoms, whereas tellurium atoms occupy guest positions. We show that the utmost stability of this clathrate (up to 1500 K) in air is ensured by the formation of a nanosized layer of phosphorus-doped silica on the surface, which prevents further oxidation and degradation. As-cast (non-optimized) Si-P-Te clathrates display rather high values of the thermoelectric figure-of-merit (ZT=0.24-0.36) in the temperature range of 700-1100 K. These ZT values are comparable to the best values achieved for the properly doped transition-metal-oxide materials. The methods of the thermoelectric efficiency optimization are discussed.

A new representative of a very rare clathrate III family, Si130P42Te21, has been synthesized from the elements. It crystallizes in the tetragonal space group P4(2)/mnm (no. 136) with the unit cell parameters a=19.2632(3) angstroms, c=10.0706(2) angstroms. Single crystal X-ray diffraction and solid state 31P NMR revealed a non-random distribution of phosphorus atoms over the framework positions. The crystal structure features a peculiar packing of large polyhedra Te@(Si/P)(n) never observed before for cationic clathrates. Despite the structural complexity, the composition of the novel clathrate Is in accordance with the Zintl rule, which was confirmed by a combination of optical metallography, scanning electron microscopy (SEM) and wavelength dispersive X-ray spectroscopy (WDXS), as well as by diamagnetic and semiconducting behavior of the synthesized phase. Clathrate Si130P42Te21 exhibits the highest reported thermal stability for this class of materials, it decomposes at 1510 K. This opens new perspectives for the creation of clathrate-based materials for high-temperature applications.

Sn(20.5)As(22)I(8), a new cationic clathrate, has been prepared by using an ampoule technique. According to the X-ray powder diffraction data, it crystallizes in the face-centered cubic space group F23 or Fm(-)3 with a unit-cell parameter of a=22.1837(4) A. Single-crystal X-ray data allowed solution of the crystal structure in the subcell with a unit-cell parameter of a(0)=11.092(1) A and the space group Pm(-)3n (R=5.7 %). Sn(20.5)As(22)I(8) (or Sn(20.5) square(3.5)As(22)I(8), accounting for the vacancies in the framework) possesses the clathrate-I type crystal structure, with iodine atoms occupying the cages of the cationic framework composed of tin and arsenic atoms. The crystal structure is strongly disordered. The main features are a random distribution of vacancies, and shifts of the tin and arsenic atoms away from their ideal positions. The coordination of the tin atoms has been confirmed by using (119)Sn Mössbauer spectroscopy. Electron diffraction and high-resolution electron microscopy (HREM) analyses have confirmed the presence of the superstructure ordering, which results in a doubling of the unit-cell parameter and a change of the space group from Pm(-)3n to either F23 or Fm(-)3. Analysis of the crystal structure has led to the construction of four ordering models for the superstructure, which have been corroborated by HREM, and has also led to the identification of disordered regions originating from overlap of the different types of ordered domains. Sn(20.5)As(22)I(8) is a diamagnetic semiconductor with an estimated band gap of 0.45 eV; it displays abnormally low thermal conductivity, with the room temperature value being just 0.5 W m(-1) K(-1).