Search

Abstract Aqueous-phase catalytic hydrodechlorination (HDC) has been scarcely explored in the literature for the removal of chlorinated micropollutants. The aim of this work is to prove the feasibility of this technology for the fast and environmentally-friendly degradation of such kind of compounds. Diclofenac (DCF), a highly consumed anti-inflammatory drug, has been selected as the target pollutant given its toxicity and low biodegradability. The commercial Pd/Al 2 O 3 (1% wt.) catalyst has been used due to its prominent role on this field. Complete degradation of DCF was achieved in a short reaction time (20 min) under ambient conditions (25 °C, 1 atm) at [DCF] 0 = 68 μM; [Pd/Al 2 O 3 ] 0 = 0.5 g L−1 and H 2 flow rate of 50 N mL min−1. Remarkably, the chlorinated intermediate (2-(2-chloroanilino)-phenylacetate (Cl-APA)) generated along reaction was completely removed at the same time, being the chlorine-free compound 2-anilinophenylacetate (APA) the only final product. A reaction scheme based on this consecutive pathway and a pseudo-first-order kinetic model have been proposed. An apparent activation energy of 43 kJ mol−1 was obtained, a comparable value to those previously reported for conventional organochlorinated pollutants. Remarkably, the catalyst exhibited a reasonable stability upon three successive uses, achieving the complete degradation of the drug and obtaining APA as the final product in 30 min. The evolution of ecotoxicity was intimately related to the disappearance of the chlorinated organic compounds and thus, the final HDC effluents were non-toxic. The versatility of the system was finally demonstrated in different environmentally-relevant matrices (wastewater treatment plant effluent and surface water). Graphical abstract Image 1 Highlights • HDC is a fast and environmentally-friendly technology for the removal of diclofenac. • The commercial Pd/Al 2 O 3 catalyst showed a high activity and a reasonable stability. • A kinetic model based on a consecutive reaction pathway fitted the experimental data. • Non-toxic effluents were achieved at the end of reaction. • The versatility of the system was proved in environmentally-relevant water matrices. [ABSTRACT FROM AUTHOR]

Highlights: [•] The intensified Fenton process represents a cost-effective alternative for sawmill wastewater treatment. [•] Increasing temperature to 120°C and feeding H2O2 in 3 additions improved the H2O2 consumption efficiency. [•] High COD (≈80%) and TOC (≈70%) removal were achieved after 1h reaction time. [•] Fungicides were completely removed obtaining short-chain organic acids as main products. [ABSTRACT FROM AUTHOR]

This work aims at evaluating the fate of microplastics (MPs) along Fenton oxidation. For such goal, realistic MPs (150–250 μm) of five representative polymer types (PET, PE, PVC, PP and EPS) were obtained from commercial plastic products by cryogenic milling. Experiments (7.5 h) were performed under relatively severe operating conditions: T = 80 °C; pH 0 = 3; [H 2 O 2 ] 0 = 1000 mgL−1 (15 doses, 1 every 0.5 h); [Fe3+] 0 = 10 mgL−1 (5 doses, 1 every 1.5 h). Slight MPs weight losses (∼10%) were achieved after Fenton oxidation regardless the MP nature. Nevertheless, oxidation yield clearly increased with decreasing the particle size given their higher exposed surface area (up to 20% weight loss with 20–50 μm EPS MPs). Clearly, MPs suffered important changes in their surface due to the introduction of oxygenated groups, which made them more acidic and hydrophilic. Furthermore, MPs progressively reduced their size. In fact, they can be completely oxidized to CO 2 , as demonstrated in the oxidation of PS nanoplastics (140 nm), where 70% mineralization was achieved. The nature of the plastic particles had a relevant impact on its overall oxidation, being more prone to be oxidized those polymers which contain aromatic rings in their structures (EPS and PET) compared to those formed by alkane chains (PE, PP and PVC). In the latter, the presence of substituents also reduced their oxidation potential. Remarkably, possible leachates released along reaction were more quickly oxidized than the MPs/NPs, so it can be assumed that these dissolved compounds would be completely removed once the solid particles are eliminated. Notably, the leachates obtained upon MPs oxidation were more biodegradable than the released from the fresh solids. All this knowledge is crucial for the understanding of MPs oxidation by the Fenton process and opens the door for the design and optimization of this technology either for water treatment or for analytical purposes (MPs isolation). [Display omitted] • Oxidation reaction proceeds from the surface to the core of plastic particles. • MPs suffered physical alterations and chemical changes along Fenton oxidation. • MPs decreased their size upon oxidation, eventually leading to their mineralization. • MPs bearing aromatic rings showed higher oxidation yields than the alkane-based MPs. • Dissolved leachates generated along the treatment did not inhibit bacterial growth. [ABSTRACT FROM AUTHOR]

This work aims at evaluating the role of nature, size, age, and natural organic matter (NOM) fouling of realistic microplastics (MPs) on the adsorption of two persistent micropollutants (diclofenac (DCF) and metronidazole (MNZ)). For such goal, four representative polymer types (polystyrene (PS), polyethylene terephthalate (PET), polypropylene (PP) and high-density polyethylene (HDPE)) were tested. MPs were obtained by cryogenic milling of different commercial materials (disposable bottles, containers, and trays), and fully characterized (optical microscopic and SEM images, FTIR, elemental analysis, water contact angle and pH slurry). The micropollutants hydrophobicity determined to a high extent their removal yield from water. Regardless of the MP's nature, the adsorption capacity for DCF was considerably higher than the achieved for MNZ, which can be related to its stronger hydrophobic properties and aromatic character. In fact, aromatic MPs (PS and PET) showed the highest adsorption capacity values with DCF (~100 μg g−1). The MP size also played a key role on its adsorption capacity, which was found to increase with decreasing the particle size (20–1000 μm). MPs aging (simulated by Fenton oxidation) led also to substantial changes on their sorption behavior. Oxidized MPs exhibited acidic surface properties which led to a strong decrease on the adsorption of the hydrophobic micropollutant (DCF) but to an increase with the hydrophilic one (MNZ). NOM fouling (WWTP effluent, river water, humic acid solution) led to a dramatic decrease on the MPs sorption capacity due to sorption sites blocking. Finally, the increase of pH or salinity of the aqueous medium increased the micropollutants desorption. [Display omitted] • The capacity of PS, PET, PP and HDPE realistic microplastics for DCF and MNZ uptake was evaluated. • Hydrophobic interactions governed the adsorption, being DCF adsorbed to a higher extent. • MPs oxidation led to their surface acidification, modifying their adsorption performance. • NOM fouling led to a decrease on MPs adsorption capacity due to sorption sites blocking. • The increase of pH or salinity increased the desorption of micropollutants. [ABSTRACT FROM AUTHOR]