Search

Disinfection by-products (DBPs) are prevalent contaminants in drinking water and are primarily linked to issues regarding water quality. These contaminants have been associated with various adverse health effects. Among different treatment processes, nanofiltration (NF) has demonstrated superior performance in effectively reducing the levels of DBPs compared to conventional processes and ozone-biological activated carbon (O 3 -BAC) processes. In this experiment, we systematically investigated the performance of three advanced membrane filtration treatment schemes, namely "sand filter + nanofiltration" (SF + NF), "sand filter + ozone-biological activated carbon + nanofiltration" (SF + O 3 -BAC + NF), and "ultrafiltration + nanofiltration" (UF + NF), in terms of their ability to control disinfection by-product (DBP) formation in treated water, analyzed the source and fate of DBP precursors during chlorination, and elucidated the role of precursor molecular weight distribution during membrane filtration in relation to DBP formation potential (DBPFP). The results indicated that each treatment process reduced DBPFP, as measured by trihalomethane formation potential (THMFP) and haloacetic acid formation potential (HAAFP), with the SF + O 3 -BAC + NF process being the most effective (14.27 μg/L and 14.88 μg/L), followed by the SF + NF process (21.04 μg/L and 16.29 μg/L) and the UF + NF process (26.26 μg/L and 21.75 μg/L). Tyrosine, tryptophan, and soluble microbial products were identified as the major DBP precursors during chlorination, with their fluorescence intensity decreasing gradually as water treatment progressed. Additionally, while large molecular weight organics (60–100,000 KDa) played a minor role in DBPFP, small molecular weight organics (0.2–5 KDa) were highlighted as key contributors to DBPFP, and medium molecular weight organics (5–60 KDa) could adhere to the membrane surface and reduce DBPFP. Based on these findings, the combined NF process can be reasonably selected for controlling DBP formation, with potential long-term benefits for human health. [Display omitted] • The SF + NF, SF + O 3 -BAC + NF, and UF + NF processes help eliminate TCM and DCAA precursors. • Proteins and soluble microbial products are the main precursors for DBP formation. • Small molecular weight organics (0.2–5 KDa) are particularly likely to form DBPs. • The process chosen should consider energy consumption and economic factors. [ABSTRACT FROM AUTHOR]

The degradation rates and kinetics of one commonly used iodinated contrast medium, iohexol, were investigated and compared during ultraviolet (UV) photolysis, UV/H 2 O 2 and UV/ S 2 O 8 2 − advanced oxidation processes (AOPs). Results indicate that the iohexol degradation rate increased in the order of UV/H 2 O 2 < UV irradiation < UV/ S 2 O 8 2 − and followed pseudo-first-order kinetics. Increasing persulfate concentration significantly increased iohexol degradation rate, whereas increasing H 2 O 2 concentration caused reverse effect. Radical scavenging test results show that UV photolysis, OH and radicals all contributed to iohexol degradation during UV/ S 2 O 8 2 − , but OH was the main contributor during UV/H 2 O 2 and was consumed by excess H 2 O 2. The kinetic models of iohexol degradation by both AOPs were developed, and the reaction rate constants with OH and were calculated as 5.73 (±0.02) × 108 and 3.91 (±0.01) × 1010 M−1 s−1, respectively. Iohexol degradation rate remained stable at pH 5–9 during UV irradiation and UV/H 2 O 2 , but gradually decreased at pH 5–7 and remained stable at pH 7–9 during UV/ S 2 O 8 2 −. The presence of anions displayed inhibitory effects on iohexol degradation during UV/ S 2 O 8 2 − in the order of Cl − > HCO 3 − ≫ S O 4 2 − . UV/ S 2 O 8 2 − AOP exhibited high degradation efficiency and stability on the basis of UV irradiation, which can be applied as a promising degradation method for iohexol. UV/ S 2 O 8 2 − AOP can effectively mineralize iohexol to CO 2 but promoted the generation of toxic iodoform (CHI 3), and the subsequent chlorination had the potential to reduce the content of disinfection by-products; therefore, further evaluation of possible environmental hazards is warranted. • The degradation efficiency of iohexol increased in the order of UV/H 2 O 2 < UV irradiation < UV/ S 2 O 8 2 − . • The iohexol degradation by UV/H 2 O 2 oxidation was mainly contributed by OH radical without UV photolysis. • The rate constants of iohexol reacting with OH and · S O 4 − were calculated as 5.73 (±0.02) × 108 and 3.91 × 1010 (±0.01) M−1 s−1, respectively. • pH has a negligible impact on iohexol degradation during UV irradiation and slight influence during UV/ and UV/H 2 O 2. • Higher concentrations of chloride and bicarbonate (≥2 mM) inhibited iohexol degradation. [ABSTRACT FROM AUTHOR]

Prometryn is a herbicide that is widely used and frequently detected in aqueous environment and soil. Prometryn is chemically stable, biologically toxic, and easily to accumulate in living bodies, which can cause accumulate in the environment and acute and chronic toxicity to living creatures. In this study, factors affecting the degradation kinetics of prometryn chlorination were studied, including solution pH, bromide and ammonium concentrations, and temperature. Prometryn reacted quickly with aqueous chlorine following the pseudo-first-order kinetics. The maximum pseudo-first-order rate constant (k app) appeared at pH 5 with the observed rate constant (k obs) as 190. 08 h−1; the minimum value of k app reached at pH 9 with k obs as 5.26 h−1. The presence of Br− and increase of temperature both accelerated the degradation rate of prometryn during chlorination. The activation energy was calculated as 31.80 kJ/mol. Meanwhile 6 disinfection by-products (DBPs) were detected, namely: chloroform (CF), trichloroacetonitrile (TCAN), dichloroacetonitrile (DCAN), dichloroacetone, trichloronitromethane (TCNM), and trichloroacetone. Solution pH significantly affected the formation and distribution of DBPs. CF was the most formed carbonated DBP (C-DBP) with the maximum of 217.9 μg/L at pH 8, and its formation was significantly higher in alkaline conditions. For nitrogenated DBPs (N-DBPs), the yields of DCAN and TCAN were significantly higher in acidic conditions, while the maximum of TCNM achieved in neutral conditions. Because the toxicity of N-DBPs is higher than that of C-DBPs, the pH should be controlled in neutral or slight alkaline conditions during prometryn chlorination to effectively control DBP formation and reduce the related toxicity. [Display omitted] • Prometryn chlorination followed pseudo-first-order kinetics. • The highest prometryn degradation rate happened at pH 5. • Br− promote prometryn degradation during chlorination, while NH 4 + inhibited it. • The degradation rate of prometryn increased with increasing temperature. • Solution pH should be controlled at around 7 to reduce the toxicity of DBPs. [ABSTRACT FROM AUTHOR]

Organic chloramines (OCs) have become one of the research focuses in the field of drinking water treatment due to its limited oxidation and sterilization ability as well as potential cytotoxicity and genetic toxicity to the public. Among widespread OCs, produced by chlorinating cytosine are a typical one exists during chlorine disinfection. OCs degradation during UV, chlorination and UV/chlorine processes were systematically investigated. UV irradiation at 254 nm could effectively degrade OCs by 96.6% after 60 min, mainly because N–Cl bond had significant UV absorption at 250–280 nm leading to the generation of Cl• and HO•. Direct chlorination had poor removal of OCs with the OCs concentration increased first and then decreased as time went by. On the other hand, the removal of OCs during UV/chlorination was much higher than that during chlorination, but was worse than that during UV alone. pH had a minor effect on OCs decomposition via UV irradiation, whereas the effect was pronounced in the chlorination and UV chlorine processes. UV wavelength can affect the degradation of OCs with efficiency decreased in the order of UV 254 > UV 265 > UV 275. The total yields of disinfection by-products (DBPs) during the degradation of OCs followed UV/chlorine > UV > chlorination. CH and DCAA were the two dominant types of DBPs among detected 7 DBPs. DBPs yield followed the order of UV254 > UV265 > UV275 at pH 6.0 and 7.0. After UV 265 irradiation, DBPs yield slightly decreased by 2.4%, 3.0% and 6.6% with the pH increased from 6.0 to 9.0. The results can provide theoretical basis for effective control of OCs in drinking water. [Display omitted] • Stable organic chloramines were produced during cytosine chlorination. • UV irradiation can effectively degrade the generated organic chloramine. • The concentrations of DOC and TN in the solution were negligibly changed during chlorination. • OCs photodecay efficiency decreased in the order of 254 nm > 265 nm > 275 nm. • DBPs yield from OCs followed the order of UV/chlorine > UV > chlorination. [ABSTRACT FROM AUTHOR]

Pyrimidine and purine bases (adenine, cytosine, guanine and thymine) are important precursors of organic chloramines (OC) and disinfection by-products (DBPs) during chlor(am)ination. In this study, OC and DBP formation derived from pyrimidine and purine bases during chlor(am)ination, post-chlor(am)ination after pretreated by UV alone and UV/chlorination were systematically investigated with ultraviolet light-emitting diodes (UV-LEDs, 265 and 275 nm) and low pressure mercury lamp (LPUV, 254 nm). The results revealed that higher OC formation was observed during chlorination than that during chloramination of pyrimidine and purine bases. The degradation of pyrimidine and purine bases followed the pseudo-first-order kinetics. Both solution pH and UV wavelength played vital influence on the degradation of pyrimidine and purine bases. In terms of fluence-based rate constants (k obs), the degradation rates of pyrimidine and purine bases decreased in the order of 275 nm > 265 nm > 254 nm in alkaline conditions. The synergistic effects of k obs, chlorine, k obs, •OH and k obs, RCS contributed to the differences of pyrimidine and purine bases degradation at different pH values and UV wavelengths. A vital suppression of OC formation was observed during post-chlorination after pretreated by 275 nm UV-LED/chlorination. In addition, compared with LPUV (254 nm), less DBP formation was observed at UV-LED (275 nm), especially during the UV/chlorine process. The phenomena obtained in this study indicated that 275 nm UV-LED combined with chlorine could be a preferred method to promote pyrimidine and purine bases degradation and control OC and DBP formation in practical water treatment. [Display omitted] • Higher levels of OC were observed during chlorination of pyrimidine and purine bases. • k obs of pyrimidine and purine bases during UV/chlorine process decreased in the order of 275 > 265 > 254 nm at pH > 7.0. • k obs, chlorine, k obs, •OH and k obs, RCS presented synergistic effects of on the removal of pyrimidine and purine bases. • UV/chlorine pretreatment significantly suppressed OC formation, but also enhanced the DBP formation. [ABSTRACT FROM AUTHOR]

Iopamidol is a commonly used iodinated X-ray contrast media in medical field, and its residue in water can react with disinfectants to form highly toxic iodinated disinfection by-products (I-DBPs). This study investigated the degradation of iopamidol and formation of DBPs, especially iodinated trihalomethanes (I-THMs), during ferrate (Fe(VI)) pre-oxidation and subsequent chlor(am)ination under raw water background. It was found that iopamidol degradation efficiency in raw water by Fe(VI) at pH 9 could reach about 80%, which was much higher than that at pH 5 and pH 7 (both about 25%). With Fe(VI) dose increasing, iopamidol removal efficiency increased obviously. During the iopamidol degradation by Fe(VI), IO 3 − was the dominant product among all the iodine species. After pre-treated by Fe(VI), yields of THM4 and I-THMs can be reduced in subsequent chlor(am)ination. Besides, pH was a crucial factor for Fe(VI) pre-oxidition controlling DBPs. With the pH increasing from 5 to 9, the yield of THM4 kept increasing in subsequent chlorination but showed the highest amount at pH 6 in subsequent chloramination. The yield of I-THMs increased first and then decreased with the increase of pH in both subsequent chlorination and chloramination. I-THM concentrations in chlorinated samples were lower than chloraminated ones under acidic conditions but became higher under neutral and alkaline conditions. The total CTI of THMs during Fe(VI)-chloramination was higher than that during Fe(VI)-chlorination under neutral condition, but sharply decreased under alkaline conditions. In summary, Fe(VI)-chloramination subsequent treatment under alkaline conditions should be an effective method for iopamidol removal and DBP control. [Display omitted] • Iopamidol removal efficiency by Fe(VI) is higher at pH > 7 than that at pH ≤ 7. • IO 3 − was a dominant iodine product during iopamidol degradation by Fe(VI). • Fe(VI)-chloramination is effective in reducing THMs under alkaline conditions. • The toxicity contribution of CHI 3 is the highest in Fe(VI)-chloramination. [ABSTRACT FROM AUTHOR]