Search

The haloalkane dehalogenase LinB from Sphingobium indicum B90A converts β-hexachlorocyclohexane (β-HCH), the most persistent HCH stereoisomer, to mono- and dihydroxylated metabolites. Recently, we reported that LinB also transforms α-, β- and γ-hexabromocyclododecanes (HBCDs), which are structurally related to HCHs. Here, we show that LinB catalyzes the hydroxylation of δ-HBCD to two pentabromocyclododecanols (PBCDOHs) and two tetrabromocyclododecadiols (TBCDDOHs). The stereochemistry of this enzymatic transformation was deduced from XRD crystal structure data of the substrate δ-HBCD and α(2)-PBCDOH, one of the biotransformation products. Five stereocenters of δ-HBCD are unchanged but the one at C6 is converted to an alcohol with inversion from S- to R-configuration in a nucleophilic, S(N)2-like substitution reaction. Only α(2)-PBCDOH with the 1R,2R,5S,6R,9R,10S-configuration is obtained but not its enantiomer. With only two of the 64 PBCDOHs formed, these transformations indeed are regio- and stereoselective. A conformational analysis revealed that the triple-turn motive, which is predominant in δ-HBCD and in several other HBCD stereoisomers, is also found in the product. This shows that LinB preferentially converted reactive bromine atoms but not those in the conserved triple-turn motive. The widespread contamination with HCHs triggered the bacterial evolution of dehalogenases which acquired the ability to convert these pollutants and their metabolites. We here demonstrate that LinB of S. indicum also transforms HBCDs regio- and stereoselectively following a similar mechanism., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Pentabromocyclododecanols (PBCDOHs) are potential environmental transformation products of hexabromocyclododecanes (HBCDs). They are also potential stage one metabolites of biological HBCD transformations. Herein, we present analytical evidence that PBCDOHs are also constituents of technical HBCDs and flame-proofed polystyrenes (FP-PSs). PBCDOHs are possibly formed during the synthesis of technical HBCD, presumably during the bromination of cyclododecatrienes in aqueous isobutanol together with isobutoxypentabromocyclododecanes (iBPBCDs), which have been identified in these materials recently. Of the 64 stereoisomers possible, eight pairs of enantiomers, named α-, β-, γ-, δ-, ε-, ζ-, η-, and θ-PBCDOHs were separated with a combination of normal-, reversed- and chiral-phase LC. Crystal structure analysis revealed the stereochemistry of the α-PBCDOH pair of enantiomers, which was assigned to (1S,2S,5R,6S,9S,10R)-2,5,6,9,10-pentabromocyclododecanol and its enantiomer. Mass spectrometric data are in accordance with the expected isotope patterns. On a C(18)-RP-column, the polar PBCDOHs eluted before the HBCD and iBPBCD classes of compounds. PBCDOHs were also found in FP-PS materials. The stereoisomer patterns varied considerably in these materials like those of HBCDs and iBPBCDs. Expanded polystyrenes were rich in late-eluting stereoisomers, similar to technical HBCD mixtures. Extruded polystyrenes contained more of the polar, faster-eluting isomers. The presented chromatographic and analytical methods allow a stereoisomer-specific search for PBCDOHs in biota samples, which might have experienced metabolic HBCD transformation reactions. Besides this potential source, it has to be recognized that PBCDOHs are by-products in technical HBCDs and in flame-proofed polystyrenes. Therefore, it is likely that PBCDOHs and iBPBCDs are released to the environment together with HBCD-containing plastic materials., (Copyright © 2012 Elsevier Ltd. All rights reserved.)

Hexabromocyclododecanes (HBCDs) are persistent organic pollutants now ubiquitous in the environment. Technical HBCD mixtures and with it flame-proofed polystyrenes (FP-PS) also contain isobutoxypentabromocyclododecanes (iBPBCDs) as minor constituents, which are possibly released together with HBCDs. So far, eight diastereomeric pairs of enantiomers named as α-, β-, γ-, δ-, ϵ-, ξ-, η-, and θ-iBPBCDs with proportions of 10%, 5%, 2%, 21%, 11%, 11%, 12% and 28% were found in technical HBCD. Herein the crystal structure of racemic δ-iBPBCD, the second most prominent diastereomer, is presented and assigned to (1S)-1-isobutoxy-(2R,5R,6S,9S,10S)-2,5,6,9,10-pentabromocyclododecane and its enantiomer. During thermal treatment of FP-PS, e.g. the production of extruded polystyrenes (XPS), proportions of δ-iBPBCDs decrease and those of other stereoisomers increase. Evidence was found that δ-iBPBCDs isomerize stereo- and regioselectively to β-iBPBCDs. Based on structural and kinetic data, a transformation mechanism was proposed. Apparent first-order rate constants (k(iso)) of 0.0019, 0.0050, and 0.012min(-1) are found for the δ- to β-iBPBCD isomerization at 120, 130, and 140°C, respectively, corresponding to half-lives of 360, 140, and 56min. These transformations also occur during the production of XPS, which predominantly contain β-iBPBCDs, whereas δ-iBPBCDs dominate in materials experiencing lower thermal stress, e.g. expanded polystyrenes (EPS). The relative configurations of δ- and θ-iBPBCDs are TtCtCt, like the one of γ-HBCDs. γ-HBCDs are the kinetically and α-HBCDs with a TcCtCc configuration the thermodynamically favored products. In analogy, β-iBPBCDs are assumed to have a TcCtCc configuration like α-HBCDs because they are formed from δ-iBPBCDs under thermodynamic control. In conclusion, HBCD- and iBPBCD-patterns in flame-proofed polystyrenes vary substantially, reflecting the thermal stress these materials have experienced. When released to the environment, these patterns might further change, as observed for HBCDs., (Copyright © 2011 Elsevier Ltd. All rights reserved.)

Polystyrenes (PS) are produced in quantities exceeding 10 Mt y(-1). They are used for insulation and packaging materials, often in flame-proofed forms with hexabromocyclododecanes (HBCDs) added as flame retardants. Polystyrenes are also constituents of plastic debris found in the aquatic environment. HBCDs are now considered as persistent, bioaccumulative, and toxic compounds. Lately, we reported that isobutoxypenta bromocyclododecanes (iBPBCDs), a formerly unknown class of polybrominated compounds, are also present in flame-proofed polystyrenes. It is therefore likely that iBPBCDs are released along with HBCDs from these materials. Herein, we report on changes of the HBCD- and iBPBCD-patterns when exposing expanded (EPS) and extruded (XPS) polystyrenes at temperatures of 140-160 degrees C. Substantial transformation reactions were observed in EPS, which was rich in gamma-HBCDs and delta-, eta-, and theta-iBPBCDs at the beginning, but changed to materials rich in alpha-HBCDs and alpha-, beta-, epsilon-, and xi-iBPBCDs. Patterns of untreated XPS already resembled those of the thermally treated EPS. Upon thermal exposure, some further enrichment of alpha-HBCDs and alpha-, beta-, epsilon-, and xi-iBPBCDs was also noticed for the XPS samples, indicating similar transformation mechanisms. Comparable apparent first-order transformation rate constants (k(trans)) of -0.003, -0.008, and -0.020 min(-1) and -0.004, -0.009, and -0.019 min(-1) are found for gamma-HBCD- and delta-iBPBCD-conversion at 140, 150, and 160 degrees C, respectively. We conclude that a thermal treatment of flame-proofed polystyrenes alters their HBCD- and iBPBCD-patterns. Thus depending on the proportions of EPS and XPS materials reaching the environment, more of the lipophilic (late-eluting) or of the more polar (early-eluting) HBCD- and iBPBCD-stereoisomers will be released. Several properties such as partitioning coefficients, degradation rates, and bioaccumulation factors are stereoisomer-specific. Therefore, the environmental fate of individual HBCDs and iBPBCDs is expected to vary, the specific stereoisomer pattern in polystyrenes at a potential source is another important aspect to consider., (Copyright 2010 Elsevier Ltd. All rights reserved.)

Hexabromocyclododecanes (HBCDs) are high production volume chemicals (>20000 ty(-1)) used as flame retardants for plastics and textiles. Lately, we reported on the stereoselective isomerization of beta-HBCDs. Herein we present insights into the mechanism and kinetics of (+)gamma- to (+)alpha- and of (-)gamma- to (-)alpha-HBCD isomerization. Only two of the six bromine atoms migrated, indicating that rearrangements of gamma- to alpha-HBCDs are regio- and stereoselective as well. The apparent first-order isomerization rate constants increased from 0.0013 to 0.0031 to 0.0070 min(-1) at 120, 130, and 140 degrees C, respectively, corresponding to half-lives of 540, 230, and 99 min. Thus, a thermal treatment of materials containing gamma-HBCDs at temperatures >100 degrees C may induce the formation of alpha-HBCDs and, hence, may alter the diastereomeric ratio of a HBCD mixture. The inversion of vicinal dibromides in like-configurations (RR/SS) prevailed, whereas unlike-configurations (RS/SR) were not affected. An intramolecular, stereoselective migration of neighboring bromine atoms via a four-center transition state would explain the observed stereoisomer pattern and first-order kinetics. Despite the fact that vicinal dibromides in HBCDs prefer synclinal (gauche) conformations, antiperiplanar (staggered) conformations are assumed to facilitate concerted 1.2-shifts of both bromine atoms. A conformation analysis revealed that under kinetic control, only those bromine atoms in the more flexible part of the molecules are migrating, whereas those in the conserved triple-turn motive were not affected. Thus, this structural motive, common to all alpha-, beta-, and gamma-HBCDs, is more rigid and less reactive than the flexible part, containing the reacting dibromides in like-configurations.

Hexabromocyclododecanes (HBCDs) are high production volume chemicals currently produced in quantities exceeding 20000ty(-1). They are used as flame retardants for plastics and textiles. HBCDs are thermally labile compounds, rapidly decomposing at temperatures above 250 degrees C to form bromine radicals, which scavenge other radicals formed during pyrolysis. But certain HBCD stereoisomers must reach the environment without decomposition, because their levels in soils, sediments, and biota are increasing worldwide. The fate of individual HBCD stereoisomers during production, product use, disposal, and transformation in the environment remains unclear. Herein we report on the thermally induced, highly selective isomerization of (+) and (-)beta-HBCD. Regio- and stereoselective migration of only two of the six bromine atoms resulted in the racemization of both beta-HBCDs. First order rate constants (k(rac)) increased from 0.005, 0.011, 0.021, to 0.055min(-1) at 130, 140, 150, and 160 degrees C, corresponding to half life times tau(1/2) of 143, 63, 29, and 14min, respectively. From the deduced kinetic model, we conclude that any thermal treatment of enantiomerically enriched beta-HBCDs in the range of 100-160 degrees C will result in a loss of most optical activity within few hours. The simultaneous inversion of two asymmetric centers occurred with perfect stereocontrol. Selectively, vicinal dibromides with the RR- and the SS-configurations migrated at these temperatures. An intramolecular reaction mechanism with a four-center transition state is postulated, based on the obtained stereoisomer pattern and the observed reaction kinetics. Crystal structure analysis revealed that all vicinal dibromides in beta-HBCDs prefer synclinal (gauche) conformations. However, an antiperiplanar (staggered) conformation is assumed to facilitate the concerted 1.2-shifts of both bromine atoms, resulting in an inversion of both neighboring carbon atoms. First experiments with other HBCD stereoisomers suggest that the presented isomerization mechanism is of relevance for those stereoisomers as well.

Hexabromocyclododecanes (HBCDs) are high production volume chemicals used as flame retardants for plastics and textiles. They are currently produced in quantities exceeding 20,000 t/y. Despite this fact, the correct stereochemistry of most HBCDs is still not known. Six stereocenters are formed during bromination of cyclododecatrienes, resulting in mixtures of different stereoisomers. Considering all elements of symmetry, 16 different stereoisomers including six pairs of enantiomers as well as 4 meso forms are possible theoretically. Recently, we isolated 8 of the 16 possible stereoisomers from a technical HBCD mixture and assigned their relative configurations. Herein, we report on the isolation of 6 enantiomerically pure alpha-, beta-, and gamma-HBCDs, obtained from preparative chiral-phase liquid chromatography, and we present their absolute configurations, which were determined from X-ray diffraction analysis. The absolute configuration of (-) alpha-HBCD was found to be (1R,2R,5S,6R,9R,10S), while the one of (+) beta-HBCD is assigned to (1S,2S,5S,6R,9S,10R), whereas the one of (-) gamma-HBCD corresponds to (1S,2S,5S,6R,9R,10S). The given structural information allows the unambiguous identification of the six most important HBCD stereoisomers, which typically account for more than 95% of technical HBCDs. In addition, we compared the solid-state conformations of racemic and enantiomerically pure alpha-, beta-, and gamma-HBCDs. In all cases, vicinal dibromides adopted a synclinal (sc) conformation with torsion angles of 69+/-6 degrees. A unique structural motive was common to all examined HBCD solid-state conformations. This conserved structure was described as an extended triple turn consisting of an arrangement of three pairs of synclinal and two antiperiplanar torsion angles.

The molecular structures of individual HBCD stereoisomers are not elucidated yet. Recently, we isolated 8 of the 16 possible stereoisomers from a technical HBCD mixture and tentatively assigned their relative configurations. Herein we report on the isolation of enantiomerically pure (+) and (-) beta-HBCDs, both obtained from preparative chiral-phase liquid chromatography, and we present their absolute configurations determined from X-ray diffraction analysis. The absolute configuration of (+) beta-HBCD was found to be (1S,2S,5S,6R,9S,10R), while the one of (-) beta-HBCD was assigned to (1R,2R,5R,6S,9R,10S). The given structural information allows, for the first time, the unambiguous identification of these two important HBCD stereoisomers, which are typically found in technical products at proportions of about 3-5% for each enantiomer.

Hexabromocyclododecanes (HBCDs) are high production volume chemicals (16700 t worldwide in 2001) used as flame-retardants for plastics and textiles. HBCDs exhibit typical properties of persistent organic pollutants (POPs). They are highly lipophilic and accumulate in biota. Increasing environmental concentrations of HBCDs, mostly reported as sum values, have been observed. As such, HBCDs have to be considered as potential emerging POPs, but their occurrence and environmental fate have not yet been addressed at the level of individual HBCD stereoisomers. Considering the six stereogenic centers of HBCDs, 16 stereoisomers, six diastereomeric pairs of enantiomers as well as four meso forms, can be deduced. Herein, we report spectroscopic and chromatographic data for eight out of 16 possible HBCD stereoisomers, which were isolated from a technical product. Six stereoisomers were identified as three pairs of enantiomers ((+/-) alpha-, beta-, and gamma-HBCDs), differing in optical rotation and chromatographic retention on a chiral phase. The crystal structures of these pairs of enantiomers were determined. Another two of these eight HBCD stereoisomers, not yet described in the literature, showed no optical rotation and are tentatively assigned as meso forms (delta- and epsilon-HBCD). The given spectroscopic and chromatographic information allows the unambiguous identification of eight HBCD stereoisomers and the occurrence, fate, and toxicology of these individual stereoisomers can now be studied.