Search

Aim of this research was to treat the organics enriched Paper and Pulp Industry (PPI) effluents using multi-metal tolerant predominant indigenous bacterial species. In addition, assessing the potential of treated bacterial biomass as a single cell protein (SCP). The multi-metal tolerant Streptomyces tuirus OS1 was enumerated from the Paper and Pulp Industry (PPI) effluents was identified through standard molecular characterization. S. tuirus OS1 proficiently ameliorated organic contaminants in PPI effluent in the in study at 35 °C, 45 °C, and 25 °C. Fortunately, the S. tuirus OS1 considerably increased the dissolved oxygen level in treated PPI effluent in 30 days of bioremediation process. Interestingly, at 35 °C of bioremediation process the S. tuirus OS1 demonstrated increased dried biomass (7.1 g L

Paper has become the basic elixir in everyone's activities and usage of paper has increased day by day, the waste generated by paper is also enormous. The primary source of paper is wood (tree) yet, waste paper is environmentally good and biodegradable; however, it is the primary source of deforestation. Current research aims to find an alternate way to recycle paper in the biological approach. Hence in our work, twelve cellulose-producing bacteria were isolated, out of which one bacterial strain proved to be the best. Cellulase enzyme was extracted and purified, and used for enzymatic de-inking of photocopy papers. The optimal conditions for cellulase synthesis were at 60 °C, glucose as the only carbon source, and potassium nitrate as the nitrogen source. The enzyme demonstrated excellent de-inking at a lower pulp consistency of 3% with a 20% enzyme dose. The cellulose and hemicellulose levels decreased, which can be attributed to fiber breaking. Further, the changes in the functional groups identified by Fourier-transform infrared spectroscopy analysis and the changes in the surface morphology of the pulp fibers were obtained using scanning electron microscope analysis.

The article presents the research results of the oxidation of watered toxic waste from the pulp and paper industry (sludge-lignin, the empirical formula of organic matter CH1.51N0.05S0.03Cl0.01O0.54) in supercritical water-oxygen (SCW/O2) fluid. The experiments were carried out using a flow tube reactor at a pressure of 25 MPa, temperature gradient along its vertical axis (from top to bottom: 390–600 °C), sludge-lignin flow rate of 9.5–14.5 g/min, oxygen ratio OR = 0.73–2.52, using NaOH (1.6 wt%) as a catalyst. Employing gas chromatography – mass spectrometry, polychlorophenols were identified in the composition of sludge-lignin, in which 2,4,6-trichlorophenol was the main component. The total yield of extracted phenols and chlorophenols per sludge-lignin organic matter was 20.82 and 2.88 μg/g, respectively. It is revealed that the conversion rate of sludge-lignin in SCW/O2 fluid is limited by heterogeneous oxidation of the carbonized residue, and is determined by the O2 content in the reaction mixture. At OR ≥ 1.16, only CO2, CO, N2, and N2O were detected in the volatile oxidation products. An increase in OR from 0.73 to 2.52 leads to a decrease in the total content of phenols (from 45540.1 to 129.3 μg/dm3) and chlorophenols (from 51.4 to 2.2 μg/dm3) in the water collected at the reactor outlet. It is shown that 2,6-dichlorophenol and 2-chlorophenol are the most resistant to oxidation. From the analysis of the initial sludge-lignin and mineral residues, it follows that the bulk of the chlorine contained in its organic matter is converted into NaCl in the course of oxidation.

Due to the presence of various organic contaminants, improper disposal of pulp-paper wastewater poses harm to the environment and human health. In this work, pulp-paper sludge (PPS) after secondary treatment were collected from M/s Century Pulp-paper Mills in India, the chemical nature of the organic pollutants was determined after solvent extraction. All the isolates were able to produce lipase (6.34–3.93 U ml− 1) which could account for the different fatty acids detected in the PPS. The dominant strains were in the classes of α and γ Proteobacteria followed by Firmicutes. The Shannon-Weiner diversity indexes for phylotype richness for the culturable and non-culturable bacterial community were 2.01 and 3.01, respectively, indicating the non- culturable bacterial strains has higher species richness and diversity compared to the culturable bacterial strains. However, the culturable strains had higher species evenness (0.94 vs 0.90). Results suggested only a few isolated strains were resistant to the POPs in the PPS, whereas non-cultural bacteria survived by entering viable but non-cultural state. The isolated strains (Brevundimonas diminuta, Aeromonas punctata, Enterobacter hormaechei, Citrobacter braakii, Bacillus pumilus and Brevundimonas terrae) are known for their multidrug resistance but their tolerance to POPs have not previously been reported and deserved further investigation. The findings of this research established the presence of POPs which influence the microbial population. Tertiary treatment is recommended prior to the safe disposal of pulp paper mill waste into the environment.

Bisphenol A (BPA) was commonly used as color developer for thermal paper such as cash register receipts, labels or tickets. Therefore, thermal paper was considered by the European Food Safety Authority (EFSA) as the main source of human exposure to BPA beside epoxy based food contact materials. In this study, a German market analysis on the use of BPA and alternative color developers in thermal paper receipts is provided for the years 2015, 2016 and 2017.114 (2015), 98 (2016) and 99 (2017) samples were randomly collected and analyzed by HPLC-DAD. In summary, BPA was still the most frequently found color developer (48.2% in 2015, 46.9% in 2016 and 52.5% in 2017). The most commonly used alternative was the phenol-free substance Pergafast® 201 (34.2%, 33.7%, 40.4%). The bisphenol analogs bisphenol S (BPS; 11.4%, 9.2%, 6.1%) and D8 (6.1%, 7.1%, 1.0%) were less common. Another phenol-free substituent, a urea urethane compound (UU), was also detected (3.1% in 2016). Concentrations of color developers in thermal paper ranged from 1.4 to 32.4 mg/g (median values between 2.5 and 15.9 mg/g). Concentrations of BPA were found to be highest followed by BPS, UU, Pergafast® 201 and D8. In addition, two pharmacologically active substances, dapsone (6.0 mg/g) and tolbutamide (5.5 mg/g), were detected in a non-marketed thermal paper, that was supposed to use ascorbic acid as initial color developer. Different release experiments of the detected color developers were performed. Sensitizers 1,2-diphenoxy-ethane, 1-phenylmethoxy-naphthalene and diphenylsulfone, used frequently in the thermal paper processes, were quantified.

Chlorine bleaching technology (C process, CEH process, H process and theirs combination), which was identified as a primary formation source of PCDD/Fs, is still widely used by the vast majority of Chinese non-wood pulp and paper mills (non-wood PMs). The purpose of this study was to provide information and data support for further eliminating dioxin for non-wood PMs in China, and especially to evaluate the PCDD/Fs release reduction for those mills converting their pulp bleaching processes from CEH to ECF. The PCDD/Fs concentrations of the bleached pulp and bleaching wastewater with ECF bleaching were in the ranges of 0.13–0.8 ng TEQ kg −1 , and 0.15–1.9 pg TEQ L −1 , respectively, which were far lower than those with CEH process, indicating that the ECF process is an effective alternative bleaching technology to replace CEH in Chinese non-wood PMs to reduce dioxin release. The release factor via flue gas of the alkali recovery boiler in Chinese non-wood PMs was first reported to be 0.092 μg TEQ Ad t −1 in this study. On the assumption that pulp bleaching processes of all Chinese non-wood PMs were converted from CEH to ECF, the annual release of PCDD/Fs via the bleaching wastewater and bleached pulp would be reduced by 79.1%, with a total of 1.60 g TEQ.

Thermal paper contains potentially toxic compounds such as bisphenol A (BPA), which is used as a color developer. BPA has been reported in thermal paper in concentrations up to 42,600 μg g−1. The exposure to BPA via dermal transfer has been recently discussed as a significant contribution to the overall human exposure and the estimated daily intake (EDI) has been reported up to 218 μg d−1. BPA has been also detected in recycled paper with concentrations up to 46 μg g−1. Due to the fact that BPA is a known endocrine disruptor and migrates from materials, regulatory restrictions have been established to prevent risks for the human health. As a consequence, structural analogues, such as bisphenol S (BPS) have been introduced into the market. Little is known about the presence and toxicity of these emerging replacements, and concern has risen about them. The present review gives an overview of the occurrence and levels of BPA and replacements in thermal paper. BPA is still the most common color developer found in thermal paper, followed by BPS. The analytical methods used for quantification of BPA and BPA replacements in paper products are also reviewed. BPA is transferred from thermal paper products to the finger pads upon handling it. Paper-skin transfer followed by penetration of BPA depends on conditions (e.g. greasiness of fingers and use of hand cream). It is, however, still debated whether thermal paper as a source for human exposure contributes significantly to the overall internal BPA exposure.

This study firstly investigated the species, concentration variation, and emission factors of mercury emitted from the burning of incenses and joss papers in an Asian temple. Both indoor and outdoor speciated mercury (GEM, GOM, and PHg) were sampled by manual samplers, while ambient GEM at an indoor site was in-situ monitored by a continuous GEM monitor. Field measurement results showed that the total atmospheric mercury (TAM) concentrations in indoor and outdoor environments were in the range of 8.03-35.72 and 6.03-31.35 ng/m3, respectively. The indoor and outdoor ratios (I/O) of TAM in the daytime and at nighttime were in the range of 0.64-0.90 and 1.50-2.04, respectively. The concentrations of GEM, GOM, and PHg during the holiday periods were approximately 1-4 times higher than those during the non-holiday periods. GEM was the dominant mercury species in the indoor and outdoor environments and accounted for 63-81% of TAM, while the oxidized mercury accounted for 19-37% of TAM. Burning incenses and joss papers in a combustion chamber showed that the concentration of GEM from joss paper burning ranged from 4.07 to 11.62 μg/m3, or about 13.97 times higher than that of incense burning, while the concentration of PHg from incense burning ranged from 95.91 to 135.07 ng/m3, or about 3.29 times higher than that of joss paper burning. The emission factors of incense burning were 10.39 ng/g of GEM and 1.40 ng/g of PHg, while those of joss paper burning were 12.65 ng/g of GEM and 1.27 ng/g of PHg, respectively. This study revealed that speciated mercury emitted from worship activities had significant influence on the indoor and outdoor mercury concentrations in an Asian temple. Higher intensity of worship activities during holidays resulted in a higher concentration of speciated mercury in indoor and outdoor air, which might cause health threats to worshipers, staffs, and surrounding inhabitants through long-term exposure.

The efficiency of combining iron sulfate and organic amendments (paper mill sludge, olive mill waste compost and olive tree pruning biochar) for the remediation of an As- and Cu-contaminated soil was evaluated. Changes in As and Cu fractionation and solubility due to the application of the amendments was explored by leachate analysis, single and sequential extractions. Also, the effects on Arrhenatherum elatius growth, germination of Lactuca sativa and toxicity to the bacteria Vibrio fischeri were assessed. The combination of iron sulfate and the organic amendments efficiently reduced As solubility and availability through the formation of amorphous iron oxides, while organic matter did not seem to mobilize As. At the same time, copper fractionation was strongly affected by soil pH and organic matter addition. The soil pH significantly influenced both As and Cu mobility. Within all the amendments tested, FeSO4 in combination with compost showed to be the most suitable treatment for the overall remediation process, as it reduced As and Cu availability andenhanced soil nutrient concentrations and plant growth. In sipte of contradictory trends between chemical analyses and ecotoxicity tests, we can still conclude that the application of organic amendments in combination with reactive iron salts is a suitable approach for the remediation of soils contaminated by Cu and As.

A novel adsorbent, the uniform fiber ball (UFB) loaded with polypyrrole (UFB-PPy), was synthesized for Cr(VI) removal from water in this paper. The structure of the UFB and UFB-PPy were characterized by SEM, EDS, FT-IR, BET, XPS and TG. The adsorption properties of UFB-PPy towards Cr(VI) were investigated by the effects of temperature, initial concentration of Cr(VI), interfering ions and contact time in batch experiments, the isothermal models (Langmuir, Freundlich and Temkin) and the kinetic models (Pseudo first-order kinetic, Pseudo second-order kinetic and Intra-particle diffusion models) were used to describe the adsorption behavior. The effects of the initial concentration and flow rate of the Cr(VI) solution in the column experiments were also studied, and the dynamic models (Yoon-Nelson, Adams-Bohart and Wolborska model) were applied to predict the adsorption performance. The Cr(VI) removal mechanism of UFB-PPy was revealed by studying the effect of pH on adsorption, testing of Cl−, and analyzing the XPS. The results showed that UFB-PPy exhibited excellent adsorption properties for Cr(VI) both in batch and column adsorption. The possible adsorption mechanism involved electrostatic attraction, ion exchange and reduction. Conveniently, the chromium resources can be recovered with the form of high-purity Cr2O3 by simple calcination of Cr(VI)-captured UFB-PPy (UFB-PPy-Cr).

Chemosensors have attracted increasing attention for their usefulness on-site detection and monitoring. In this study, we elucidated a novel, facile, and highly selective Chemo-Paper-Sensor (CPS) for detection and monitoring of strontium (Sr(2+)) ions, which means a potent colorimetric sensor based on a Chrysoidine G (CG)-coated paper strip. The CPS for highly selective colorimetric detection of strontium ion was handily analyzed to determine the red-green-blue (RGB) value using portable devices such as desktop digital scanner and mobile phone camera, quantitatively. Interestingly, an orange to dark orange color transition was observed when the aqueous and solid paper colorimetric sensor was introduced to Sr(2+) ion, respectively. It was demonstrated that the value of the signal has a linear relationship with concentrations of the strontium in the 500 ppm to 100 ppb range with a detection limit of 200 ppb. We believe that a newly developed Chemo-Paper-Sensor will be useful in a wide range of sensing applications.

Bisphenol A (BPA) is widely used in industrial products. Due to the toxicity of this compound, and to comply with restrictions and regulations, manufacturers have progressively replaced it by substitutes. One of the main substitutes used is bisphenol S (BPS). Despite increasing use in many products, the effects of BPS on human health have been little investigated, and studies on percutaneous BPS absorption and particularly toxicokinetic data are lacking. However, the endocrine-disrupting activity of BPA and BPS appears comparable. Dermal contact is a significant source of occupational exposure and is the main route during handling of bisphenol-containing receipts by cashiers. Here, percutaneous BPS absorption was investigated and compared to that of BPA. Experiments were performed according to OECD guidelines. Test compounds dissolved in a vehicle - acetone, artificial sebum or water – were applied in vitro to fresh human skin samples in static Franz diffusion cells. Flux, cumulative absorbed dose and distribution of dose recovered were measured. BPA absorption was vehicle-dependent ranging from 3% with sebum to 41% with water. BPS absorption was much lower than BPA absorption whatever the vehicle tested (less than 1% of applied dose). However, depending on the vehicle 20% to 47% of the applied BPS dose remained in the skin, and was consequently potentially absorbable. Both BPA and BPS were mainly absorbed without biotransformation. Taken together, these results indicate that workers may be exposed to BPS through skin when handling products containing it. This exposure is of concern as its toxicity is currently incompletely understood.

The article reviews the transition from bleaching kraft pulp with elemental chlorine to bleaching with chlorine dioxide with respect to formation of chlorinated dioxins and furans (PCDD/Fs). New data is also presented for bleaching with 100% chlorine dioxide and the effect of elemental chlorine impurities. The typical fingerprint of PCDD/Fs in pulp bleached with elemental chlorine was unique compared to all other sources such as incineration and metallurgic processes. 2,3,7,8-TCDD and 2,3,7,8-TCDF were the dominating congeners formed during the period pulp was bleached with elemental chlorine. Elimination of unchlorinated precursors lowered, but did not eliminate, the formation of 2,3,7,8-TCDD and 2,3,7,8-TCDF. The formation of 2,3,7,8-TCDD and 2,3,7,8-TCDF increases exponentially with the amount of elemental chlorine used. Replacing elemental chlorine with chlorine dioxide (with levels of elemental chlorine contamination of

In this study, Moringa oleifera (M. oleifera) performance as an eco-friendly coagulant in the enhanced primary treatment of paper mill effluent was investigated. Its performance in terms of turbidity removal and COD abatement was examined. Local M. oleifera seed powder from ADRAR-city, South of Algeria, was used. Conventional jar tests were conducted for enhancing the primary treatment of paper mill effluent from paper factory. For this reason, comparative coagulation tests were performed using aluminum sulfate (alum). Indeed, in terms of turbidity abatement, 96.02% and 97.1% were obtained for Moringa and alum, respectively. However, in the case of COD abatement, the abatement rate of M. oleifera seeds was slightly higher than that of alum, 97.28% and 92.67%, respectively. Because M. oleifera is a natural resource that is locally available, an eco-friendly coagulant, non-toxic, and biodegradable and does not affect the pH of water; thus, its use allows to avoid numerous disadvantages of conventional coagulants like alum.

Perfluoroalkyl acids (PFAAs) are widely used as multi-purpose surfactants or water/oil repellents. In order to understand the contamination level and compositional profiles of PFAAs in aqueous environment in textile, leather, and paper making industrial areas, surface waters and tap waters were collected along the watershed of the Qiantang River where China's largest textile, leather, and paper making industrial bases are located. For comparison, surface water and tapwater samples were also collected in Hangzhou and its adjacent areas. 17 PFAAs were analyzed by solid phase extraction-high performance liquid chromatography-tandem mass spectrometry. The results show that the total concentrations of PFAAs (ΣPFAAs) in the Qiantang River waters ranged from 106.1 to 322.9 ng/L, averaging 164.2 ng/L. The contamination levels have been found to be extremely high, comparable to the levels of the most serious PFAA contamination in surface waters of China. The PFAA composition profiles were characterized by the dominant PFOA (average 58.1% of the total PFAAs), and PFHxA (average 18.8%). The ΣPFAAs in tap water ranged from 9.5 to 174.8 ng/L, showing PFAA compositional pattern similar to the surface waters. Good correlations between PFAA composition profiles in tap waters and the surface waters were observed.

Paper receipt has been documented as one major source of bisphenol A (BPA) for human exposure but little has been done by researchers to elaborate the potential health risk caused by handling paper receipt up to date. In the present study, BPA was analyzed in 42 supermarket receipts collected from Shenzhen, China. BPA was detected in all samples at concentrations ranging from 2.58 to 14.7mgg(-1). In most cases, the total amount of BPA on the receipt was at least one thousand times the amount found in the epoxy lining of a food can, another controversial use of the chemical. The estimated daily intakes (EDI) of BPA via handling of supermarket receipt ranged from 2 to 347μgday(-1) (mean, 40.4μgday(-1)) for a supermarket cashier and from 0.24 to 3.98μgday(-1) (mean, 0.69μgday(-1)) for general population. Based on the cumulative probability distribution of the calculated daily exposure to BPA via handling supermarket receipt, the EDI at the 0.1th and 1th percentile for supermarket cashier and general population, were already larger than 100ng (kgbw)(-1)day(-1), while at the 0.2th and 71th percentile, the EDI for both populations reached 1000ng (kgbw)(-1)day(-1). Considering the adverse endocrine disruptive effects of BPA and the dosage exposure level (from tens to hundreds ng (kgbw)(-1)day(-1)), human exposure to BPA in Shenzhen deserves more attention. Sensitivity analysis result showed that the handling time and frequency of supermarket receipts are the most important variables that contributed to most of the total variance of exposure.

Considerable amount of bottom ash (BA) is produced by tea and paper factories in Northeast India. This significantly deteriorates soil and surface water quality through rapid acidification, releasing sulfur compounds and heavy metals. The present investigation endeavoured to convert this waste to organic manure through vermicomposting by Eisenia fetida. Substantial increment in bioavailability of N, P, K, Fe, Mn and Zn along with remarkable decline in toxic metal like Cr due to vermicomposting was noteworthy. Furthermore, vermicomposted mixtures of Tea Factory BA (TFBA) or Paper Mill BA (PMBA) with organic matter (OM) attributed profuse pod yield of French Bean (Phaseolus vulgaris L.). Hence, bioconversion of TFBA and PMBA is highly feasible through vermicomposting and the converted materials can be utilized as potential organic fertilizer.

In this study, the efficiency of six ion exchange resins to reduce the dissolved organic matter (DOM) from a biologically treated newsprint mill effluent was evaluated and the dominant removal mechanism of residual organics was established using advanced organic characterisations techniques. Among the resins screened, TAN1 possessed favourable Freundlich parameters, high resin capacity and solute affinity, closely followed by Marathon MSA and Marathon WBA. The removal efficiency of colour and lignin residuals was generally good for the anion exchange resins, greater than 50% and 75% respectively. In terms of the DOM fractions removal measured through liquid chromatography-organic carbon and nitrogen detector (LC-OCND), the resins mainly targeted the removal of humic and fulvic acids of molecular weight ranging between 500 and 1000 g mol(-1), the portion expected to contribute the most to the aromaticity of the effluent. For the anion exchange resins, physical adsorption operated along with ion exchange mechanism assisting to remove neutral and transphilic acid fractions of DOM. The column studies confirmed TAN1 being the best of those screened, exhibited the longest mass transfer zone and maximum treatable volume of effluent. The treatable effluent volume with 50% reduction in dissolved organic carbon (DOC) was 4.8 L for TAN1 followed by Marathon MSA - 3.6L, Marathon 11 - 2.0 L, 21K-XLT - 1.5 L and Marathon WBA - 1.2 L. The cation exchange resin G26 was not effective in DOM removal as the maximum DOC removal obtained was only 27%. The resin capacity could not be completely restored for any of the resins; however, a maximum restoration up to 74% and 93% was achieved for TAN1 and Marathon WBA resins. While this feasibility study indicates the potential option of using ion exchange resins for the reclamation of paper mill effluent, the need for improving the regeneration protocols to restore the resin efficiency is also identified. Similarly, care should be taken while employing LC-OCND for characterising resin-treated effluents, as the resin degradation is expected to contribute some organic carbon moieties misleading the actual performance of resin.

Enzyme-aided Cl

A lignin peroxidases-producing Serratia liquefaciens was used for bioremediation of pulp and paper (P&P) mill effluent. The treatment led to reduction of chemical oxygen demand (COD), colour, lignin and phenolic content by 84%, 72%, 61% and 95%, respectively. The effluent detoxification was studied by genotoxicity assays using Allium cepa L. (onion) root tip cells. Genotoxicity studies included measuring mitotic index (MI), chromosomal aberrations (CA) and nuclear abnormalities (NA) in root tip cells following treatment with 25, 50, 75 and 100% (v/v) of effluent. The root tip cells grown in untreated effluent showed a significant decrease in MI from 69% (control) to 32%, 27%, 22% and 11% at 25%, 50%, 75% and 100% effluent concentration, respectively. This indicated that the untreated effluent was highly cytotoxic in nature. Further, root tip cells, when treated with different concentrations of effluent showed various CA and NA including c-mitosis, stickiness, chromosome loss, chromosome break, anaphase bridge, multipolar anaphase, vagrant chromosomes, micronucleated and binucleated cells. The MI observed in root tip cells grown in bacterial treated effluents at similar concentrations (25, 50, 75 and 100% v/v) showed an increase of 33%, 36%, 42% and 66%. CA showed a substantial decrease and in some instances, complete absence of CA was also observed. The findings suggest that S. liquefaciens culture could be a potential bacterial culture for bioremediation of P&P mill effluent, as it is effective in substantial lowering of pollutants load as well as reduces the cytotoxic and genotoxic effects of effluent.

The study was conducted with an aim to remediate effluent from a pulp and paper mill, after treating it for 28 days with an aquatic fern, Salvinia cucullata. The effluent had high BOD, COD, TS, TSS, TDS, P, hardness and chloride, and several heavy metals (Cd, Cu, Cr, Ni, Pb, Mg, Mn, Fe and Zn) above national limits. However, the plant survived a wide range of effluent concentrations (25%, 50%, 75% and 100%, v/v), and flourished well, particularly at 25% (v/v), resisted membrane injury and generation of H2O2 and O2, showed better growth and induced all the major antioxidant enzymes. The plants also induced lipid peroxidation. Most of the elemental profiles were higher than the toxic levels stipulated for plants, indicating tolerance to metal. In fact, barring Fe, for Cr, Cu, Pb, Zn, Mg and P, at all the effluent doses, and for Cd, Ni and Mn, up to 75% (v/v) effluent, greater concentrations were observed in leaf than in root. This plant was more suited for nutrient removal, as it effectively reduced BOD, Zn, Fe, Ni, Mg, P and increased dissolve oxygen. Further, pH, hardness, chloride, TS and Mn was reduced optimally by 25–50% (v/v) treatments. SEM revealed prominent structural damages from 50 to 100% treatments. Presence of Pb as well as Fe in the EDX peaks were observed in the cortex rather than in the root vascular zone. This plant could be suggested to be an effective phytoremediator of multi-contaminant effluent with maximum benefit at low doses (25–50%, v/v).

Tricaine methanesulfonate (MS-222) has been widely used in intensive aquaculture systems to control stress during handling and confinement operations. This compound is dissolved in the water tanks and, once it is present in the Recirculating Aquaculture Systems (RASs), MS-222 can reach the environment by the discharge of contaminated effluents. The present work proposes the implementation of the adsorption process in the RASs, using pyrolysed biological paper mill sludge as adsorbent, to remove MS-222 from aquaculture wastewater. Adsorption experiments were performed under extreme operating conditions, simulating those corresponding to different farmed fish species: temperature (from 8 to 30 °C), salinity (from 0.8 to 35‰) and different contents of organic and inorganic matter in the aquaculture wastewater. Furthermore, the MS-222 adsorption from a real aquaculture effluent was compared with that from ultrapure water. Under the studied conditions, the performance of the produced adsorbent remained mostly the same, removing satisfactorily MS-222 from water. Therefore, it may be concluded that the produced adsorbent can be employed in intensive aquaculture wastewater treatment with the same performance independently of the farmed fish species.

Recycling paper mill effluent by conventional water treatment is difficult due to the persistence of salt and recalcitrant organics. Elimination of dissolved organic matter (DOM) from paper mill effluent was studied using three treatment options, ion exchange resin (IER), granular activated carbon (GAC) and nanofiltration (NF). The removal efficiency was analysed based on hydrophobicity, molecular weight and fluorogenic origin of the DOM fractions. For IER, GAC and NF treatments, overall removal of dissolved organic carbon was 72%, 76% and 91%, respectively. Based on the hydrophobicity, all the three treatment methods majorly removed hydrophobic acid fractions (HPhoA). Further, IER acted on all fractions, 57% of HPhoA, 44% of transphilic acid and 18% of hydrophilics, substantiating that the removal is by both ion exchange and adsorption. Based on the molecular weight, IER and GAC treatments acted majorly on the high molecular weight fractions, whereas NF eliminated all molecular weight fractions. After GAC adsorption, some amount of humic hydrolysates and low molecular weight neutrals persisted in the effluent. After IER treatment, amount of low molecular weight compounds increased due to resin leaching. Qualitative analysis of fluorescence excitation emission matrices showed that the fulvic acid-like fluorophores were more recalcitrant among the various DOM fractions, considerable amount persisted after all the three treatment methods. Three treatment methods considerably differed in terms of removing different DOM fractions; however, a broad-spectrum process like NF would be needed to achieve the maximum elimination.

A previously uncultured Propionibacterium was isolated from a highly diluted sample (10(-6)mL) of activated sludge of paper mill effluent. The isolate MOB600 was able to grow on anisole, phenetole, benzene, toluene, phenol, styrene and biphenyl, although it used only limited carbon sources in the minimal media. The partial DNA sequence of 16S ribosomal RNA gene was 93% identical to Luteococcus peritoni CCUG38120 as the closest neighborhood in the family Propionibacteriaceae. Strain MOB600 produced 2-methoxyphenol and 2-ethoxyphenol seemingly in an unproductive pathway from the degradation of anisole and phenetole, respectively. It had a substrate preference to favor 3-alkoxyphenols over 2-alkoxyphenols. Formation of 3-hydroxylated O-aryl alkyl ether was substantially proved by the nearly 1:1 biotransformation of substrate-analogous 1,2-methylenedioxybenzene to 3,4-methylenedioxyphenol (sesamol) showing end-product inhibition. The strain converted 2-/3-methoxyphenols to 3-methoxycatechol. The extradiol ring fission of 3-methoxycatechol appeared to take place in the production of a yellow-colored 2-hydroxymuconate derivative, thereby being able to release methanol spontaneously. High specificity polymerase chain reaction screening for bacterial dioxygenases revealed that the genomic DNA encoded at least three ring-hydroxylating dioxygenase large subunits. Being consistent with substrate availability for this strain, the obtained sequences were closely related to large subunits of an isopropylbenzene 2,3-dioxygenase, a benzene 1,2-dioxygenase, a biphenyl 2,3-dioxygenase, a benzoate 1,2-dioxygenase and a putative dioxygenase in Rhodococcus strains. Our results demonstrate that strain MOB600 may play a major role in the degradation of lignin-like O-aryl alkyl ethers and various aromatic hydrocarbon pollutants in activated sludge of paper mill effluent.

The removal of AOX from bleach plant effluent of pulp and paper industry was studied using upflow anaerobic filter. In this paper biodegradation of AOX at different concentrations and effect of electron donors like acetate and glucose thereon in an upflow anaerobic filter at 20 d HRT is described. Results showed significant improvement in AOX degradation when electron donors such as acetate and glucose were supplemented to the influent. AOX degradation was 88% at 28 mg AOX L(-1) and 28% at 42 mg AOX L(-1). The percent degradation efficiency was enhanced to 90.7, 90.2, and 93.0 at 28 mg AOX L(-1) when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. Similarly, the efficiency was 57, 56.6 and 79.6 at 42 mg AOX L(-1) when the influent was supplemented with glucose, acetate and both glucose and acetate, respectively. The GC-MS analysis data indicated that supplementation of the influent with electron donor increased the biodegradability of number of chlorinated organic compounds.

This study examined the potential biological hazard of pulp and paper waste solids. The solids examined were chosen on the basis of the range of wood-related organic extractives and were either primary solids screened from the effluent stream before secondary treatment, or biosolids from aerated stabilisation lagoons. Acute effects were tested at the level of plants, invertebrates and soil microbes using an oat germination and growth test, earthworm survival and reproduction test, an enchytraeid worm survival and reproduction test, and standard measures of microbial respiration. This was further benchmarked against a marine bacteria toxicity test using extract of the waste solids. Resin acids and resin acid neutrals made up the greatest proportion of organic extractives measured in biosolids whereas resin acids and fatty acids were the main constituents detected in primary solids. Examination of the tissue of earthworms from the tests revealed no net bioconcentration of the organic extractives. The waste solids were not acutely toxic to any of the soil organisms as tested without any dilution. Conversely, extracts of the waste solids demonstrated toxicity in the marine bacteria. In some cases, the solid waste material enhanced the growth of plants, earthworm reproduction and microbial respiration. The only adverse affect was that reproduction of enchytraeids was reduced by some of the waste solid treatments. However these effects did not appear to be associated with concentrations of resin acid neutrals and resin acids in these materials. Overall pulp and paper wastes were relatively benign in terms of toxicity to the soil organisms tested.

Paper mill effluents may contain polychlorinated dibenzo-p-dioxins (PCDDs) and polychlorinated dibenzofurans (PCDFs) that are normally generated due to chlorinated bleaching of pulp and paper. We used the semipermeable membrane device (SPMD) to monitor PCDD/F levels upstream and downstream of a paper mill on the Androscoggin River, in Jay (ME). Following the 36 day deployment, SPMD dialysis and cleanup, the samples were analyzed by HRGC/HRMS. Total concentrations of PCDD/Fs in SPMDs (sum of all tetra-through octachlorinated congeners) ranged from 4.71 pg g(-1) to 26.26 pg g(-1). Five out of the targeted 17 toxic congeners were detected, including: 2,3,7,8-TCDF; 1,2,3,7,8-PeCDF; 2,3,4,7,8-PeCDF; 1,2,3,4,6,7,8-HpCDD and OCDD. Permeability reference compounds (PRCs) were used for in situ calibration of the SPMD sampling rate (Rs). In all sites, water concentrations were the highest for OCDD (0.081-0.103 pg l(-1)), and the lowest for 1,2,3,7,8-PeCDF (0.005-0.009 pg l(-1)). There was not a consistent pattern of upstream-downstream gradient in the PCDD/F levels. This suggested that processes other than the mill in Jay (multiple sources, river dynamics) governed the flux of PCDD/Fs in the sampling locations. The SPMD results were validated by comparison to other studies on the Androscoggin River and elsewhere, confirming the potential of the device as a useful monitoring technique for PCDD/Fs in large river systems.

Enzymatic hydrolyzates of recycled paper sludge were tested as suitable feedstock for biological desulfurization by Gordonia alkanivorans strain 1B. Only the hydrolyzate obtained after enzymatic mixture dialysis (dialyzed hydrolyzate) allowed dibenzothiophene (DBT) desulfurization, in spite of faster bacterial growth did occur on non-dialyzed hydrolyzate. For dialyzed hydrolyzate, 250microM DBT was consumed after 96h displaying a maximum specific productivity of 2-hydroxybiphenyl of 1.1micromol g(-1)(dry cell weight) h(-1). A comparison of the kinetics of biodesulfurization was assessed according to the type of hydrolyzate supplementation. Complete consumption of DBT was observed upon the addition of only phosphates and ammonia although further addition of zinc did increase the 2-hydroxybiphenyl production by 14%. Strain 1B was able to desulfurize a model oil containing DBT, 4-methylDBT and 4,6-dimethylDBT, reducing by 63% the total sulfur content in 168h.

Eight aerobic bacterial strains were isolated from pulp paper mill effluent sludge. Out of eight through nutrient enrichment technique three potential aerobic bacterial strains ITRC S(6), ITRC S(7) and ITRC S(8) were found capable to effectively degrade the kraft lignin (KL), a major byproduct of the chemical pulping process and main contributor to the colour and toxicity of effluent. Further, these potential strains (ITRC S(6), ITRC S(7) and ITRC S(8)) were biochemically characterised as Gram variable small rod, Gram negative rod and Gram positive rod respectively. Subsequently, 16S rRNA sequencing showed 95% base sequence homology and it was identified as Paenibacillus sp. (AY952466), Aneurinibacillus aneurinilyticus (AY856831), Bacillus sp. (AY952465) for ITRC S(6), IITRC S(7) and ITRC S(8), respectively. In batch decolourization experiments Bacillus sp. ITRC S(8) reduced the colour of lignin amended mineral salt medium, pH 7.6 by 65% after 6th d, at 30 degrees C, A. aneurinilyticus ITRC S(7) by 56% and Paenibacillus ITRC S(6) 43%. Under these conditions the three strains degraded the KL by 37%, 33% and 30%, respectively while the mixed culture of these three bacteria reduced colour by 69%, lignin by 40% and total substrate by 50% under same conditions. Biodegradation of the KL was not affected by low (

Serious inhibition was found in the regular up-flow anaerobic sludge blanket (UASB) reactor in treating the evaporator condensate from a sulfite pulp mill, which contained high strength sulfur compounds. After applying the direct limited aeration in the UASB, the inhibition was alleviated gradually and the activity of the microorganisms was recovered. The COD removal rate increased from 40% to 80% at the organic loading rate of 8kgCODm(-3)d(-1) and a hydraulic retention time of 12h. Limited aeration caused no oxygen inhibition to the anaerobic microorganisms but instigated sulfide oxidization and H(2)S removal, which was beneficial to the methanogens. The experiment confirmed the feasibility of applying limited aeration in the anaerobic reactor to alleviate the sulfide inhibition. It also proved that the anaerobic system was actually aerotolerant. SEM observation showed that the predominant microorganisms partly changed from rod-shaped methanogens to cocci after the UASB reactor was aerated.

Different advanced oxidation processes (AOPs) have been applied to remove the organic carbon content of a paper mill effluent originating from the Kraft pulp bleaching process. The considered AOPs were: TiO2-mediated heterogeneous photocatalysis, TiO2-mediated heterogeneous photocatalysis assisted with H2O2, TiO2-mediated heterogeneous photocatalysis coupled with Fenton, photo-Fenton, ozonation and ozonation with UV-A light irradiation. The application of the selected AOPs all resulted in a considerable decrease in dissolved organic carbon (DOC) content with variable treatment efficiencies depending upon the nature/type of the applied AOP. A Life Cycle Assessment (LCA) study was used as a tool to compare the different AOPs in terms of their environmental impact. Heterogeneous photocatalysis coupled with the Fenton’s reagent proved to have the lowest environmental impact accompanied with a moderate-to-high DOC removal rate. On the other hand, heterogeneous photocatalysis appeared to be the worst AOP both in terms of DOC abatement rate and environmental impact. For the studied AOPs, LCA has indicated that the environmental impact was attributable to the high electrical energy (power) consumption necessary to run a UV-A lamp or to produce ozone.

Two in-series columns systems with volcanic soil were tested for wastewater pollutants adsorption capacity. The first system was tested with acidified volcanic soil and the second with a reactivated volcanic soil. The reactivated soil was obtained by washing the previous spent acidified soil system with an acid solution. The systems parameters were obtained using the Bohardt and Adams model for fixed-beds. The acidified soil parameters indicated an adsorption capacity q of 28 and 139 mg/g of phenolic compounds and color, respectively (for each column), compared to 12 and 39 mg/g for the reactivated soil system. The adsorption rate constant k ranged between 1.5 × 10 −6 and 2.8 × 10 −6 l/min mg and no significant difference was observed for each analysed column system and pollutant. Furthermore, the molecular weight distribution analysis of input and output samples of one acidified soil column indicated that the fraction >30 000 Da is the most adsorbed until the breakpoint. Moreover, the CODs and tannins and lignin removal efficiencies at the breakpoint reached values between 60% and 70% in each column and each system, indicating that lower biodegradable compounds were retained effectively. The results indicate that it is possible to compare the acidified volcanic soil adsorption capacity with natural zeolites, and a preliminary costs evaluation indicates that volcanic soil could be also competitive, even when comparing with activated carbon.

A novel paper-based material containing titanium dioxide (TiO(2)) photocatalyst was successfully prepared by a papermaking technique with the internal addition of inorganic fibers on which TiO(2) particles were supported. Photodegradation performance of acetaldehyde gas, an indoor pollutant, and the durability of the TiO(2)-containing papers were investigated under UV irradiation. Ceramic fiber suspension and polydiallyldimethylammonium chloride as a cationic flocculant were mixed, followed by the addition of TiO(2) suspension and anionic polyacrylamide. Subsequently, the inorganic mixture was poured into a pulp suspension, and TiO(2) handsheets then prepared by a papermaking method. The tensile strength of TiO(2)-containing paper without a ceramic carrier decreased by more than 30% after 240-h UV irradiation (2 mW/cm(2)), although the strength of the TiO(2) sheet with ceramic fibers remained reasonably stable. The efficiency of acetaldehyde decomposition by the TiO(2) paper containing an inorganic carrier was nearly equal to that of the carrier-free TiO(2) paper. Scanning electron microscopic observation suggested that most TiO(2) particles were predominantly supported on the inorganic fiber matrix, and were mostly out of contact with organic pulp fibers. The TiO(2) paper with an inorganic carrier demonstrated both excellent photocatalytic performance and durability, which before had been mutually incompatible for organic materials containing TiO(2) photocatalyst. The two-stage mixing procedure for TiO(2) sheet-making is promising for the simple manufacture of high performance paper with photocatalytic ability.