Search

This paper investigates the performances of terahertz-wave parametric oscillators (TPOs) based on the LiNbO3 crystal at different pump wavelengths. The calculated results show that TPO characteristics, including the frequency tuning range, the THz-wave gain and the stability of THz-wave output direction based on the Si-prism coupler, can be significantly improved by using a short-wavelength pump. It also demonstrates that a long-wavelength-pump allows the employment of a short TPO cavity due to an enlarged phase-matching angle, that is, an increased angular separation between the pump and oscillated Stokes beams under the THz-wave generation at a specific frequency. The study provides an useful guide and a theoretical basis for the further improvement of TPO systems. [ABSTRACT FROM AUTHOR]

A diode-end-pumped Nd:YAG dual-wavelength laser operating at 1319 and 1338 nm is demonstrated. The maximum average output power of the quasi-continuous wave linearly polarized dual-wavelength laser is obtained to be 2.1 W at a repetition rate of 50 kHz with an output power instability of less than 0.38% and beam quality factor M2 of 1.45. Using the two lines, the highly coherent and narrow linewidth terahertz radiation of 3.23 THz can be generated in an organic 4-N, N-dimethylamino-methyl-stilbazolium tosylate (DAST) crystal. Meanwhile, the multi-wavelength red laser at 659.5, 664 and 669 nm is generated by frequency doubling and sum frequency processes in a lithium triborate (LBO) crystal. The average red laser output power is enhanced up to 1.625 W at a repetition rate of 15 kHz with an output power instability of better than 0.53% and beam quality factor M2 of 6.05. Using the three lines, it is possible to generate the multi-wavelength THz radiation of 3.3, 3.43 and 6.73 THz in an appropriate difference frequency crystal. [ABSTRACT FROM AUTHOR]

We report a numerical simulation of continuous terahertz beam induced transient thermal effects on static water. The terahertz wave used in this paper has a Gaussian beam profile. Based on the transient heat conduction equation, the finite element method (FEM) is utilized to calculate the temperature distribution. The simulation results show the dynamic process of temperature change in water during terahertz irradiation. After about 300 s, the temperature reaches a steady state with a water layer thickness of 5 mm and a beam radius of 0.25 mm. The highest temperature increase is 7 K/mW approximately. This work motivates further study on the interaction between terahertz wave and bio-tissue, which has a high water content. [ABSTRACT FROM AUTHOR]