Search

The conversion of energy between seismic and electromagnetic wave fields has been described by Pride's coupled equations in porous media. In this paper, the seismoelectric field excited by the explosive point source located at the outside of the borehole is studied. The scattering fields inside and outside a borehole are analyzed and deduced under the boundary conditions at the interface between fluid and porous media. The influences of the distance of the point source, multipole components of the eccentric explosive source, and the receiving position along the axis of vertical borehole, on the converted waves inside the borehole are all investigated. When the distance from the acoustic source to the axis of a borehole is far enough, the longitudinal and coseismic longitudinal wave packets dominate the acoustic and electric field, respectively. The three components of both electric field and magnetic field can be detected, and the radial electric field is mainly excited and converted by the dipole component. Owing to the existence of borehole, the electric fields and magnetic fields in the borehole are azimuthal. The distance from the point where the maximum amplitude of the axial components of electric field is recorded, to the origin of coordinate indicates the horizontal distance from the explosive source to the axis of vertical borehole. [ABSTRACT FROM AUTHOR]

Water-saturated porous media often exhibit a seismoelectric effect due to the existence of an electrical double layer and a relative flow of pore fluid. Here we consider the seismoelectric waves in an open borehole surrounded by water-saturated porous formation which exhibits discontinuity of electrochemical properties at a cylindrical interface. We carefully analyze the seismoelectric interface response since these signals show sensitivity to contrasts in electrochemical properties across an interface. Both coupled and approximate methods are used to compute borehole seismoelectric fields. The simulation results show that the radiated electromagnetic wave from the electrochemical interface is generated due to the change of salinity in pore fluid in the porous formation. However, the elastic properties of the formation remain unchanged across such an electrochemical interface. As a result it is difficult to recognize such a change in electrochemical properties using only elastic waves. Therefore, the seismoelectric interface response is potentially used to detect the changes of the electrochemical properties in the formation. [ABSTRACT FROM AUTHOR]