Search

Methyl-silica superhydrophobic coatings have the capability of providing anti-pollution flashover protection for outdoor electrical insulators. However, in practical applications, the deposition and dissolution of atmospheric pollutants on the coating generates acidic or alkaline ions and leads to chemical degradation of the coating's surface property, which in turn causes a decrease in the anti-pollution flashover performance of the coating. Currently, there is a lack of research on the hydrophobic degradation characteristics of superhydrophobic methyl-silica coatings induced by chemical corrosion. Meanwhile, it is not clear how chemical corrosion affects the anti-pollution flashover performance of methyl-silica superhydrophobic coatings. To address the above issues, the static water contact angle and sliding angle on the corroded methyl-silica superhydrophobic coatings were tested to reflect the surface hydrophobicity degradation, and the results were theoretically interpreted; the surface leakage current amplitudes of the coatings aged to different degrees were measured under dirty and wet conditions to characterize the anti-pollution flashover performance of the corroded coatings. The surface leakage current amplitudes of the aged methyl-silica superhydrophobic coating under different corrosion environment temperatures, different applied electric field strengths, and different wetting times of surface pollutants are measured to characterize the anti-pollution flashover performance of the corrosion-aged coating, and the influences of the above factors on the anti-pollution flashover performance of the methyl-silica superhydrophobic coating are analyzed. [Display omitted] [ABSTRACT FROM AUTHOR]

Using micro-nanostructure superhydrophobic coating with the unique self-cleaning phenomenon is a feasible method to further reduce the frequency of insulator pollution flashover. However, the research on the anti-pollution flashover performance of superhydrophobic coating is still insufficient. This paper analyzes the various types of forces on the polluted particles accumulated on the superhydrophobic coating surface, and calculates that the vertical force or the horizontal force on the nano-scale and micro-scale particles is positive when they are in contact with most types of droplets. After being fully wetted, these particles are easily absorbed or pulled by the droplets and leave the coating surface. So it is necessary to establish a new DC pollution flashover mechanism model of superhydrophobic coatings surface from the electric field perspective. Based on this model, the relationship between the pollution flashover voltage and the dry flashover voltage is clarified in the state of extremely small leakage current. Furthermore, the anti-pollution flashover performance experiment was carried out on superhydrophobic coating, RTV coating, and uncoated surface to test the leakage current under different conditions. The experimental results show that at any pollution degree, the leakage current of superhydrophobic coating surface always remains about 16.3μA after being completely wetted. [Display omitted] [ABSTRACT FROM AUTHOR]