Search

This study proposes injectable polymeric filters to prevent diesel migration during its bioremediation. Pseudomonas aeruginosa (Gram negative bacterium) was isolated from forest soil and used to biodegrade diesel. P. aeruginosa produced biosurfactants that emulsified diesel in water while degrading it, by decreasing the interfacial tension and forming skins around diesel droplets. In lab experiments, emulsified diesel droplets could migrate through model soil columns (sand and limestone) saturated with water (to mimic aquifers). These results indicate that clean aquifers downstream of diesel spills are at risk of becoming contaminated during diesel bioremediation by P. aeruginosa. Injectable filters were developed to mitigate this risk. Injectable filters were obtained by injecting into model soils aqueous solutions of quaternized hydroxyethylcellulose (HEC+, with a positive electrostatic charge). HEC + adsorbed onto model soils, yielding positively charged surfaces. Diesel droplets stabilized by P. aeruginosa had a negative electrostatic charge (as demonstrated through zeta potential measurements) and adhered onto HEC + coated soil, likely due to attractive electrostatic forces. As a result, diesel droplet mobility through soil columns decreased. Our proof of concept indicates that injectable HEC + filters can protect clean regions of aquifers during the bioremediation of diesel spills by P. aeruginosa.

Pseudomonas sp. bacteria were incorporated into a double emulsion system (water in oil in water, W/O/W), which can be injected in the subsurface to trap and biotreat naphthalene. The outermost phase of the W/O/W emulsion was an aqueous solution of chitosan (1.65 wt.%). Naphthalene could be dispersed in the aqueous chitosan phase of W/O/W emulsions. Two separate primary water in oil (W/O) emulsions were emulsified in chitosan, using Tween 20 as emulsifier. W/O emulsions were prepared with canola oil (containing ethylcellulose and calcium stearate as emulsifiers), and aqueous solutions of either Pseudomonas sp. in minimal broth or sodium citrate (crosslinker). The formation of W/O/W double emulsions was verified with optical and confocal microscopy. Without addition of triggers able to induce gelation on demand, W/O/W emulsions were stable and mainly viscous under shear. The shear elastic modulus (G’ = 1.90 ± 0.39 Pa) and the shear viscous modulus (G” = 5.76 ± 0.06 Pa) were low, to facilitate pumping in the subsurface. With addition of the surfactant cocamidopropyl betaine, W/O/W emulsions were destabilized on demand, thereby releasing citrate (crosslinker) and Pseudomonas sp. in the chitosan phase, where naphthalene was dispersed. Mixing chitosan with citrate led to its gelation, trapping naphthalene. Mixing naphthalene with Pseudomonas sp. led to its bioremediation. Gelation was demonstrated by the increase in the viscoelastic moduli, with G’ = 111.02 ± 1.67 Pa > G” = 8.66 ± 0.10 Pa. With naphthalene, Pseudomonas sp. survival in gelled chitosan was confirmed by plating bacteria sampled from the gel. Without naphthalene, Pseudomonas sp. did not survive in chitosan.