Search

The magnetic effect on soot properties in ethylene inverse diffusion flames (IDF) was investigated in this study. The investigation involved the use of high-resolution transmission electron microscopy analysis (HRTEM), Raman spectroscopy analysis, X-ray photoelectron spectroscopy (XPS) and X-ray diffraction spectroscopy (XRD) to examine the nanostructure and graphitization degree of soot collected from flame exhaust gas at various height above burner surface (HAB) under both magnetic and non-magnetic conditions. Increasing the magnetic flux density resulted in modifications to soot properties. When the sampling height was HAB = 4 cm, increasing magnetic flux density resulted in longer fringe lengths, lower fringe tortuosity, less amorphous carbon content and surface oxygen content for the collected soot from flame exhaust gas. These results indicated higher graphitization degrees, which may be attributed to longer residence time and oxidation of soot particle in flames. Moreover, when the sampling height increased from HAB = 4 cm to 6 cm under non-magnetic condition, the nanostructure of soot in the flame exhaust gas was more organized, possible due to the oxidation of soot at the region between HAB = 4 and 6 cm region. However, with the magnetic field on, the crystalline structure of soot in the flame exhaust gas became increasingly disordered as the sampling height increased. This suggested that the soot may also be affected by the magnetic effects in addition to oxidation at the region between HAB = 4 and 6 cm region. The magnetic effect could trigger the transformation of graphitic carbon to amorphous carbon in soot particles as they passed through the magnetic field. With more elaborated magnetic fields, the magnetic effect on soot could contribute to strategies controlling soot emissions and removal. [ABSTRACT FROM AUTHOR]

This paper proposes a hyperspectral imaging technique for capturing radiative images at a high temporal–spatial resolution, for the purpose of spectrally visualizing the instantaneous combustion behaviors of single coal particles. We initially use a hyperspectral imaging device to record the combustion processes of two types of single pulverized coal particles on a McKenna flat-flame burner. From the snapshot images captured by the device, we observe the combustion processes, ignition characteristics, flame morphologies, and sizes of the two single coal particles. The observations indicate that the two single coal particles undergo volatile release/combustion and char ignition/oxidation during the luminous combustion process; moreover, both particles exhibit homogeneous ignition characteristics under the experimental conditions. Furthermore, based on the spectral radiative intensity images obtained via the device, the soot temperature and volume fraction images of the two single coal particles in the envelope flame are obtained at different burning times. Thereafter, the influences of the combustion behaviors and soot formation mechanisms on the distribution rules of the soot temperature and concentration at different combustion periods are discussed. Finally, the temperature and apparent spectral emissivity values of the two single char particles during the char oxidation process are also calculated to analyze their combustion behaviors. The results show that the temperature changes within a relatively narrow range with respect to the burning time during the oxidation stage, whereas the spectral emissivity continues to increase with the oxidation of chars and subsequently decreases. [ABSTRACT FROM AUTHOR]