Search

Purpose: This paper aims to propose an effective method to verify poles polarities of switched reluctance motors (SRMs). Different from the ways of detection poles polarities by permanent magnet in SRMs, the difference of self-inductance between different winding connections is used to verify the pole polarity. Design/methodology/approach: First, the winding connections with the forward and reverse series are proposed. The magnetic circuit models are established to analyze the flux linkage of different winding connections. Then, according to the difference of inductance characteristics, including the self-inductance and the mutual inductance affected by the adjacent poles, it is theoretically feasible to verify the polarity of each pole. Finally, the proposed method is verified by the simulation and experiment on a six-phase SRM. Findings: First, compared to the reverse series, the forward series can produce larger self-inductance when one phase is excited at the same current excitation, which can be used to verify the poles polarities of one phase with different winding connection. Second, the mutual inductance can be used to distinguish the winding connections. Third, the difference of the maximum self-inductance of the winding, which is composed of two adjacent windings, can be used to verify the polarities of the adjacent poles. Originality/value: This paper proposes an effective method to verify poles polarities of SRMs. [ABSTRACT FROM AUTHOR]

Purpose Inductance, torque and iron loss are the key parameters of switched reluctance motors for belt-driven starter generators. This paper aims to present the analysis of a segmented rotor switched reluctance motor (SSRM) with three types of winding connections for hybrid electric vehicle applications by using a two-dimensional finite element method.Design/methodology/approach The rotor of the studied SSRM consists of a series of discrete segments, while the stator is made up of exciting and auxiliary teeth. First, the concept and structures of the different winding connections are introduced. Then, the magnetic flux path of the three types of winding connections for the SSRM is described. Second, the magnetic flux distributions in the three parts, i.e. the stator yoke, the stator tooth and the rotor segment, are described in detail to calculate the iron losses. Third, three SSRMs with the different winding arrangements are analyzed and compared to evaluate the distinct features of the studied SSRM. The analysis and comparison mainly include self-inductances, mutual inductances, phase currents, output torque and iron loss.Findings It is found that the self-inductances of the three types of winding connections are almost equal, and only the SSRM1 has a positive mutual inductance. In addition, the current waveforms of SSRM1 and SSRM2 are regular. However, it is irregular in SSRM3. It is shown that SSRM1 has better characteristics, such as higher output torque, high power density, lower torque ripple and iron loss.Originality/value This paper proposes and analyzes three novel winding connections for the SSRM to provide guidance for enhancing the output torque and reducing the iron loss to achieve high efficiency. [ABSTRACT FROM AUTHOR]