Search

Purpose An improved simulation model of switched reluctance motor (SRM) for steady-state operation that considers the core losses in the stator and rotor is established to obtain the steady performance of the high-speed SRM during the design, analysis and control of SRM driving system more accurately.Design/methodology/approach The transient core loss model for the material and SRM is presented. Then a new method for calculating the flux density of the motor in real time is introduced, and a steady-state simulation model of the SRM including real-time transient core losses calculation model is established according to the transient flux density. Because the transient core losses calculated by above method are the total core losses of the motor, a core losses distribution method is proposed and the steady-state simulation model of the SRM including the distributed core losses' effect on the phase winding is established.Findings The comparison results show that the proposed model has higher accuracy than the traditional model, excluding core losses, especially at the moments when phase voltage is turn-on and turn-off. The proportion of the core losses to the motor losses increases with the increase in speed. So, the core losses' effect on the steady-state performance of the high-speed SRM cannot be ignored.Originality/value The method to obtain flux density in the real time is presented and the improved steady-state simulation model of SRM that considering transient core losses is proposed. [ABSTRACT FROM AUTHOR]

Purpose This paper aims to establish a modified variable coefficient calculation model to analyse the control parameter effect on the iron loss of switched reluctance motor under pulse width modulation (PWM) mode.Design/methodology/approach The finite element model is solved to get the flux density by python language. Due to non-sinusoidal flux density feature and the effect of PWM excitation, the Fourier transform is applied in consideration of harmonic components. To improve the accuracy of iron loss computation, the effect of minor loops is considered by using the rain-flow counting method.Findings When the speed fluctuates around the set speed and the fluctuations are relatively small, it is useful to reduce the iron loss with smaller duty ratio and turn-on angle or greater duty ratio and smaller turn-off angle. The iron loss is less affected by chopping frequency, while the iron loss increases obviously with higher conduction angles. The iron loss under non-energy-returnable-voltage-chop mode is greater than energy-returnable-voltage-chop mode.Originality/value The modified variable coefficient MIEM5 iron loss model is proposed to improve the accuracy of iron loss calculation. Then the control parameters such as duty ratio, chopping frequency, turn on angle and turn off angle are analysed under PWM mode. [ABSTRACT FROM AUTHOR]