Search

A novel integrated manufacturing process based on continuous fibre reinforced thermoplastic composites 3D printing of continuous fibre reinforced composite lightweight structures (CFRCLSs) was proposed. Cross lap and panel-core lap design strategies were proposed to fabricate the CFRCLSs with a complex shape. The fracture modes during compression loading were analysed. Correlations between the process parameters, structure parameters, density, fibre content, and final performance of the printed specimens were discussed. The fibre content of the printed CFRCLSs were controlled by changing the process parameters. With a fibre content of 11.5% vol, a compression strength of 17.17 MPa was obtained for the 3D printed CFRCLSs. A heterogeneous lightweight sandwich structure specimen was fabricated to demonstrate process feasibility. This new and improved process has great potential for fabricating CFRCLSs with complex shapes, high mechanical properties, and multifunctional benefits. [ABSTRACT FROM AUTHOR]

Over the last few years, three-dimensional printing(3DP) technology has evolved to incorporate composite materials. However, using material extrusion (ME) technology, it is still difficult to improve the stiffness with stable elongation and energy absorption of continuous fiber reinforced composites at the same time. This study aimed to 3D print hybrid threads by merging several types of continuous Kevlar and Carbon fibers. Which were created using material extrusion 3D printing to accomplish cooperative ductility and brittleness augmentation. To analyze the mechanical performance and reveal the failure and deformation mechanisms, tension tests, three-point bending tests, and drop hammer impact tests were performed. The proposed hybrids have substantially greater flexural modulus, flexural strength, tension modulus, and tension strengths with absorbed energies than standard single type fiber composites. Crack resistance during impact test of hybrid composites was enhanced by over 91% compared to carbon fiber non-hybrid composites. SEM images of hybrid specimens provided an insight of the failure mechanisms, resulting in stable hybrid composites. Positive hybrid effect further demonstrates its great energy absorption capacity. [ABSTRACT FROM AUTHOR]

[Display omitted] • Modeling and 3D printing of variable stiffness composites with curved fibers. • Limitations of 3D printing are taken into account in the modeling. • 3D printing of the variable stiffness composites without gaps and overlaps. • 3D printing by the control of positioning a nozzle and the adaptive feed of plastic. • Comparison of numerical and experimental strain fields of the VSCs via FEM and DIC. In this paper, biomimetic continuous fiber reinforced composite structures were modeled and printed on the basis of variable distributions of fiber orientation and the fiber volume fraction, which are similar to the wood structure in the vicinity of a knot. The variable distributions of curved fibers in the variable stiffness composites (VSCs) without gaps and overlaps were realized during the 3D printing process by the control of positioning a nozzle and the adaptive feed of plastic. To demonstrate efficiency of the modeling method and the 3D printing process, a VSC plate with a hole under tensile loading was designed, printed and tested. The results of tensile tests showed that the main failure of the composite plates occurs far from the hole. Furthermore, numerical and experimental strain fields obtained by the finite element method and digital image correlation, respectively, are similar. The efficiency in fiber savings for the composite plates was improved by the change in reinforcement from unidirectional fibers to curved fibers adapted to heterogeneous stress fields. [ABSTRACT FROM AUTHOR]

3D printing of continuous fiber reinforced thermoplastic composites (CFRTPCs) enables the fabrication of multiscale structures, whose features can simultaneously span the microscale fiber trajectory and macroscale topological structure. In this study, a multiscale design and manufacturing strategy integrating concurrent optimization of micro fiber orientation and macro structural topology was developed for CFRTPCs and realized by ingenious path planning for 3D printing process. Typical structures, such as Messerschmitt-Bölkow-Blohm (MBB) beam and cantilever beam, were verified experimentally in comparison with the monoscale structures. Structural stiffness and peak load could be improved by 36.27% and 64.43% respectively for MBB beam, 123.07% and 52.16% respectively for cantilever beam, showing the significant influence on concurrent material and structure design for CFRTPCs. Multiscale concurrent design and 3D printing could promote the potential of CFRTPCs, and even challenge traditional design and manufacturing mechanism relating material and structure scale. [ABSTRACT FROM AUTHOR]

The local properties of continuous fiber reinforced heterogeneous composites (CFRHCs) can be tailored through fiber arrangement design to maximize load and fiber utilization efficiency. Design method and integrated manufacturing process for CFRHCs have been investigated in the current research, based on 3D printing of continuous fiber reinforced composites (CFRCs). Based on the tensile and compressive properties of 3D printed CFRCs, the optimal design method of CFRHCs under process constraints and actual working conditions was studied. The mapping relationship between fiber volume content and process parameters was studied, and a digital transition from optimized design to 3D printing solutions was implemented. The flexural strength of the optimized CFRHCs is 207 MPa, and the maximum increase ratio is 115% compared with other heterogeneous designs with the same fiber volume content. The failure process of CFRHCs was analyzed by the simulation model, and the damage mechanism of CFRHCs under bending load was revealed. The optimization design and integrated manufacturing solution of the CFRHCs have potential applications in aerospace, automotive and other fields. [ABSTRACT FROM AUTHOR]