Search

The purpose of hybridization is to obtain a new material preserving advantages from all of its constituents. Hybridization offers intermediate properties respect to the original materials, by creating a balance effect within the fibres incorporated in the composite materials and leading to a composite with more tailored behaviour The increasing need to mitigate the environmental impact of synthetic fibres and polymers is promoting the use and application of natural materials orienting the research toward the development of biodegradable systems. In this framework, hybrid reinforced laminates with flax and basalt twill layers alternatively stacked, were manufactured by resin infusion fabrication technology and impacted at low velocity to investigate their dynamic behaviour, in an attempt to couple the impact resistance of basalt fibres with the environmentally friendly nature of flax fibres. For comparison purposes, the same experimental characterization has been performed on laminates reinforced with only basalt or flax fibres. The experimental results confirmed the positive role played by fibre hybridization in terms of damage. The Electronic Speckle Pattern Interferometry technique was adopted to analyze the internal damage and to provide information on the shape and the extent of the delamination, that was found concentrated under the impactor-material contact point for the basalt and flax/basalt laminates.

The damage resistance of a fibre reinforced composite materials subjected to a concentrated indentation force has been investigated. Composite samples were manufactured by vacuum infusion process and then tested according to the concentrated quasi-static indentation test standard (QSI). The composite coupons were sensorized with embedded Bragg grating fibres in various positions, to monitor the indentation-induced deformations during the loading event. Numerical simulations, performed by using a commercial FEM software, were carried out and predictions results compared with experimental data. Final results showed that Bragg wavelength changes sensitively depending on the applied quasi-static forces and it identifies correctly the non-linear pattern of the force–displacement curve. It was determined that strain transfer to the Bragg fibre is strongly influenced by the embedding conditions and final location of the optoelectronic sensors in term of shifting and in-plane rotation. Comparison between simulated and experimental data showed some discrepancy mainly due to the displacement of the embedded fibre sensors from their original location, caused by the manufacturing. However, by an inverse procedure based on iso-strain curves both shifting and rotation of the FBG sensors respect to their original position could be evaluated. This work confirms that although Bragg fibres are effective and reliable to monitor deformations of composite elements during an impact event but unwanted and unpredictable effects, due to manufacturing, should be carefully taking into account to analyse correctly the sensor signal and quantitatively evaluate the inter-laminar strains.